Boxlight Boston Series User Manual

9 
 
 
 
 
Part Names  
Rear 
 
 A    B C D E 
 
 F G   H    I J    K L 
  
   
   
   
   
 
Q P  
A  REAR IR RECEIVER 
O N M  
I LAN 
B  USB Port (USB-B Type) 
Connect a USB cable to a computer to control computer Interactive functions. 
C  RS-232C 
Serial data port for controlling the projector with a computer or other RS-232 control 
P l e a se  see  page76  N e t w o rk  C o n t r ol  Application for details. 
J S-VIDEO 
I nput the S-Vid eo si gn al from a vid eo source. 
K  AUDIO IN 3, R / L...

1
0  Setting Up  
Arrangement  
 
1.   Before   installation,   make   sure that   the   projector   is   turned   o f f and   the   power cord   is   disconnected.  
2.   Do not   set   up and   move   the   projecto r ,   while   it   is   hot.  
3.   The   distance   between   the   projector   and   screen   determines   the   actual   image   size.   Refer   to   the   table 
below   to   determine   the   screen   size   at   a   given   distance.  
 
Note:   The   dimensions in   the table...

1
1  Setting Up   
   
 
 
  
Arrangement  
 
1.  Before installation, make sure that the projector  is turned off and the power cord  is disconnected.  
2.   Do not set up and move the projector, while  it is hot.  
3.   The distance between the projector and screen determines the actual image size. Refer  to the table 
below  to determine the screen size  at a given distance.  
 
Note: The dimensions in the table below are approximate.  
  16:10  
  Sc r een   size   (diagonal))   Distance (m)...

12
Power ON / OFF
Turning on the power
1.  Make sure that power cord is firmly and correctly connected to the projector.
2.  Remove the lens cover, and the POWER indicator will light up in green.
3.  Press POWER button on the control panel or the remote control to turn on the projector.
4. Rotate the zoom ring to adjust the screen size.
5. Rotate the focus ring to adjust the focus.
Turning off the power
1.  Press the POWER button on the control 
panel or the remote control. The “power off” 
confirmation...

1
3  Setting Up   
   
   
 
 
   
  
Setting Up The Projector  
 
The projector supports the following four different projection methods.  
 
 
1. Front projection  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2. Rear projection   3. Rear ceiling projection
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4. Front ceiling  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Projection  
  Special installation  is required  in order  to suspend the projector from the ceiling. Please ask your 
dealer for details.   

14
Ceiling Mounted Installation Guide 
Attach ceiling mount at four-suspension bracket fixing points when suspending from a ceiling. 
Special installation is required in order to suspend the projector from \
the ceiling. Please ask your 
dealer for detals.
Security Anchor
The product is equipped with security 
anchor and PIN LOCK functions to help 
prevent unauthorized removal projector.
MAX M4x8 mm For Mounting.
 WARNING
►Do not grasp the security anchor to carry projector, since it is not designed for...

15
Adjusting The Projector’s Elevation
Use the adjustable foot at the front of the projector to set the image h\
eight.
1   Holding the projector, push the foot adjust 
buttons to loosen the front adjustable foot.
12   Position the front side of the projector to the 
desired height.
3   Release the foot adjust buttons in order to 
lock the front adjustable feet.
14   After making sure that the front adjustable 
feet are locked, put the projector gently 
atop.
 CAUTION
*  The adjustment range of front...

1
6  Setting Up   
   
   
  
 How To Connect
 
 
Laptop or desktop computer    
 
 
 
 
 
 
Video  recorder  
DVD  Player,  etc.  
 
  RS-2 3 2 C  t er mi na l                RGB  Output    HD MI   S- VIDEO Output 
AUDI O  Out p ut
 
W hit e (L)/ Re d( R)  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  AUDI O  I n p ut 
W hit e (L)/ Re d( R)   RGB   Out p ut /I n p ut
 
VIDEO Output  AUDI O  Out p ut
 
W hit e (L)/ Re d( R)    
Audio  amplifier,  etc.    
 
Video  recorder,  etc.
 
  Before starting, make sure...

1
7  Setting Up   
 ●
If  the selected video image  is not displayed after the projector  is turned  on and the correct 
video source has been selected, please check that the video source device  is turned on and 
operating correctly. Also check that the signal cables have been connected correctly.  
 
 
● Many laptops do not turn on their external video ports when connected to a projector . 
Usually a key combination like Fn + F3 or CRT/LCD key turns the external display on / 
off. Locate a function...

1
8  Remote   Cont r ol   
   
 
 
  
Remote Contr ol Battery Installation  
  1. Remove the battery cover.  
 
 
 
2. Load the batteries.  
Make sure the poles are correctly oriented.  
 
 
3. Close the battery cover.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Caution  
 
● Avoid excessive heat and humidity.  
●  Do not drop the remote control.  
●  If the remote control  will not  be  used for an extended period, remove the batteries.  
●  Do not expose the remote control  to water  or moisture. This could result...