Bose Wave radioCD Sold from November 1998 to August 2004 User Manual

11
CD changer, tape
deck, or VCRAudio output jacks
If there are two sets of
outputs (fixed and
variable), use fixed so
that the volume can
be controlled from the
Wave Radio/CD.AUX IN jacks
Television or
computerAudio output jacks
If there are two sets of
outputs (fixed and
variable), use fixed so
that the volume can
be controlled from the
Wave Radio/CD.AUX IN jacks
Stereo cable with
male-to-male RCA
plugsAUX IN jacks Bose
® Lifestyle®
music system
Powered speakers
with volume
controlSpeaker system input...

12
On
OffSleep
CD
FM AMAUX
Track
Tune
Volume
Mute
123
456
Wave Radio/CD
Presets
Operating Your Wave® Radio/CD
Using the remote control
You can use the remote control to operate the most frequently used functions of the radio,
CD player, and alarms. Aim the remote control at the display of your Wave Radio/CD. Use the
remote buttons in the same way you use the system control panel.
The remote normally works up to 20 feet in front of the system, and 6 feet to either side.
Replace the remote control batter y...

13
Presets
Volume AUX
On/Off
Alarm
Setup
456
Track/Tune
Sleep/Snooze
Wave Radio/CD
Alarm 1
On/OffAlarm 2
On/Off
123
FM AM
Stop
Alarm
CD PlayCD Mode CD Stop
Time Time
Using the radio/CD control panel
In addition to controlling the most frequently used functions of the radio, CD player, and
alarms, control panel buttons allow you to set the time, alarms, CD mode, and radio presets
(Figure 8).
Using button combinations on the control panel gives you access to additional special
features (such as customizing...

14
Reading the Wave Radio/CD display
Figure 9
The Wave Radio/CD display
Lights when Alarm 1 is
activated, flashes while
setting Alarm 1, and when
going off
Indicates
AM or PM
Operating Your Wave® Radio/CD
Indicates that sleep
or nap timer is
selected Shows current time,
alarm time, sleep
time, snooze time,
nap time, AM/FM
frequency, CD time,
CD program item,
battery levelLights when Alarm 2 is
activated, flashes while
setting Alarm 2, and when
going offIndicates the
selected source
Indicates the
Alarm 1...

15
Operating Your Wave® Radio/CD
Setting the time
Function
To set the clock - Hold down either Time  or  button or press the same one twice.
The time display changes slowly at first, then faster. Release the clock set button to stop.
Customizing the display
Function
To set AM/PM (12 hour) or Military (24 hour) time - With the system off, hold
down Alarm Setup and press On/Off to switch between AM/PM (12 hour) and Military
(24 hour) time formats.
To select clock or source display mode - With the system...

16
Operating Your Wave® Radio/CD
Controlling the system
Function
To turn on/off - Press On/Off once to turn on or off. The system turns
on to the last source played.
To select a source - Press FM or AM, CD, or AUX. To listen to a
component connected to AUX, be sure to turn on the component.
Pressing AUX does not turn on the component.
To adjust the volume - With the system on or off, press and hold
either button to reset the volume. The display shows the volume level,
from 0 (silent) to 99 (loud). With...

17
Operating Your Wave® Radio/CD
On/OffFMAMFM AM
Track/Tune
Track/Tune
Track
Tune
Track
Tu n e
Track/TunePresets
456123
Presets
456123
FM AM123
456Presets
Alarm
SetupTrack/Tune
Using the radio
Function
To turn the radio on/off - Press On/Off once to turn on or off. The
system turns on to the last source played. Or, press FM or AM or any
Preset to turn the radio on.
To seek a station - Press Track/Tune  or  once to tune in the
next strong station. Repeat to locate a station you prefer. After manually...

18
Operating Your Wave® Radio/CD
Using the CD player
Lift the CD door (as shown). Place the CD, label-side up, on the spindle in the CD well. Gently
lower the door more than halfway, until it begins to close by itself. Or continue to close it
manually if you prefer.
Figure 11
Setting up a CD
Function
To turn on/off - Press On/Off once to turn on or off. The system turns
on to the last source played. Or, press CD Play 
 to turn on the CD
player. In CD mode, the CD begins to play as soon as you load a...

19
Operating Your Wave® Radio/CD
Reading the CD display
Figure 12
A CD display example
CD Mode
CD StopOn/Off
Alarm
Setup
FM AMAUX
Shows CD elapsed time,
CD remaining time,
CD total time,
CD programming
(Pr01, Pr02...)
Indicates which CD play mode is selectedIndicates CD is the
selected sourceLights when CD is playing,
flashes for pause
Shows CD
track number
Lights for CD
programming
Track/Tune
Alarm
Setup
Track
Tu n eTrack/Tune
CD Stop
Alarm
SetupCD Play
On
OffSleepCDFM AMAUX
Track
TuneVolume
Mute123...

20
Operating Your Wave® Radio/CD
Setting the alarms
Note: You can set alarms with the Wave Radio/CD on or off.
Function
To enter alarm setup mode - Press and release Alarm Setup. The system is now in alarm
setup mode. ALARM 1 flashes for 10 seconds.
To select which alarm to set - While ALARM 1 is flashing, set alarm time, volume, and alarm
sound (tone 
, radio, or CD), for Alarm 1. Press Alarm Setup again until ALARM 2 is flashing.
While it flashes for 10 seconds, begin to set Alarm 2.
To set the alarm...