Bose Soundlink 2 Instruction Manual

11
Tab 6, 14English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13Tab 8, 16Tab2, 7, 15
OPERATION
Connecting to AC power
Before using your new SoundLink® Bluetooth® 
Mobile speaker II the first time, you should 
connect it to AC (mains) power. 
To connect to AC power:
1. Depending on your region of the world, do 
one of the following to prepare your power 
pack for use:
A. Unfold the power supply prongs. OR
B. Slide the AC adapter for your region  into the power supply.
AC adapter
Power 
pack
Bruiser_OG.book...

12
OPERATION
Tab 3, 11Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12EnglishTa b 2 ,  1 0
2.Plug the DC power cord on the power 
supply into the DC connector on the 
SoundLink
® Mobile speaker II. 3.
Plug the power supply into a live AC 
(mains) outlet.
 The speaker emits a tone to confirm the 
connection, and charging begins.
 Once connected to AC power, your  SoundLink
® Mobile speaker II is ready 
for use.
Bruiser_OG.book  Page 12  Tues day, June 26, 2012  10:29 AM 

13
OPERATION
Tab 6, 14English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13Tab 8, 16Tab2, 7, 15
System status indicators
The status indicators, located on the front of the SoundLink® Mobile speaker II, illuminate to 
indicate when a source or feature is activated.The speaker is playing the source connected 
to the AUX ( ) input.
The  Bluetooth
® source is selected and 
indicates the stat e of the speaker:
 Slowly fades on-off once per second  – 
Discoverable and ready to pair with a new 
device.
 Blinks on-off...

14
OPERATION
Tab 3, 11Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12EnglishTa b 2 ,  1 0
Control buttons
The control buttons are located on the top of the speaker.
Pairing with Bluetooth® devices
Pairing occurs when two  Bluetooth devices 
communicate with each other and establish a 
connection. A record of information about this 
connection is then stored in the memory of 
each device. Once you pair a device with the 
SoundLink
® Mobile speaker II, you should not 
have to pair it again.
The...

15
OPERATION
Tab 6, 14English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13Tab 8, 16Tab2, 7, 15
To begin pairing with a Bluetooth device
1. With the  Bluetooth  device and the 
SoundLink
®Mobile speaker II both turned 
on, press and hold the  Bluetooth button 
on the speaker for three seconds to make 
the speaker discoverable.
The  Bluetooth
® indicator on the 
SoundLink® Mobile speaker II slowly fades 
on and off approximately once every 
second to show that the speaker is 
discoverable.
2. Set your Bluetooth...

16
OPERATION
Tab 3, 11Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12EnglishTa b 2 ,  1 0
To pair additional devices With the  Bluetooth  device and the 
SoundLink
® Mobile speaker II both turned on, 
press the  Bluetooth  button on the speaker for 
three seconds to make the speaker 
discoverable again. Then follow steps 2 - 4 on 
this page.
The SoundLink
® Mobile speaker II memory 
can hold up to six paired devices. You can 
pair more than six devices, but the memory 
will never contain more than six....

17
OPERATION
Tab 6, 14English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13Tab 8, 16Tab2, 7, 15
To add a source:
1. Plug the cable from the audio device into 
the AUX ( ) connector on the back of the 
SoundLink
® Mobile speaker II. 2.
Press the AUX button.
3. Adjust the volume on the connected 
device to  near maximum, then use the 
SoundLink® Mobile speaker II volume 
buttons to adjust the level.
Note: If a connected device st ops playing audio for 30 minutes, the speaker au tomatically turns off.
Note: The...

18
OPERATION
Tab 3, 11Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12EnglishTa b 2 ,  1 0
Operating on battery power
A fully charged battery provides approximately three hours of use at maximum volume. The 
rate of battery discharge varies with the volume 
setting. You can extend the battery playback 
time by reducing the volume.
Checking the battery The battery status indicator is normally off to  conserve battery power. To check the charge 
level, press and hold  the power button and 
observe the...

19
Tab 6, 14English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13Tab 8, 16Tab2, 7, 15
MAINTENANCE AND CARE
Troubleshooting
ProblemWhat to do
Speaker will not turn 
on (AC power) Make sure your system is connected
 to a working AC (mains) outlet.
 Make sure the protective cover is open.
Speaker will not turn 
on (battery power)  Battery may be in protection mode or di
scharged – connect to working AC (mains) 
outlet to restore the battery to operational mode.
 Make sure the protective cover is open.
Paired...

20
MAINTENANCE AND CARE
Tab 3, 11Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12EnglishTa b 2 ,  1 0
No audio from a 
Bluetooth® device
Bluetooth device and/or SoundLink
® Mobile speaker II away from other 
devices that generate electromagnetic in terference. Examples are cordless phones, 
microwave ovens, wireless network routers, or other  Bluetooth devices.
 If possible, turn off all other nearby  Bluetooth devices or disable their  Bluetooth 
functionality.
 Turn the SoundLink
® Mobile speaker II...