Home > Bose > Amplifier > Bose Sa4 Manual

Bose Sa4 Manual

Download as PDF Print this page Share this page

Have a look at the manual Bose Sa4 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 223 Bose manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

$Page 24 24 - English Adding a Wi-Fi® network If your network information has changed, or to connect your system to an\ other network, you must add the new network information in the app and then co\ nnect the system. 1. Launch the SoundTouch ™ app. 2. Click EXPLORE > SETTINGS > Systems. 3. Select the system. 4. Click CONNECT TO A WI-FI NETWORK. 5. Follow the instructions on your computer. Troubleshooting For more troubleshooting information, refer to the Help system in the SoundTouch™ app. Problem What...$

$Page 27 English - 27 SoundTouch™ SA-4 Amplifier Features • Bose® proprietary digital signal processing technology • Built-in digital volume control • Thermal overload protection Dimensions and Weight • 14¼ in. wide x 5½ in. deep x 4¼ in. high (36.2 cm x 14.0 cm x \ 10.8 cm) • 11.0 lb (5 kg) Power rating • USA/Canada: 120V60 Hz, 400W • International: 220-240V50/60 Hz, 400W Input sensitivity 0.5 Vrms @ 1 kHz Signal to Noise ratio (S/N) 90 dB Output power (continuous average) 100W / channel minimum into 6...$

$Page 31 Appendices English - 31 Note: Mounting hardware must be purchased separately. If the mounting hardware instructions differ from these instructions, follow the mounting hardware instructions. • Wood Mo\fnting: Mount to 1 in. (25.4 mm) or thicker wood. Drill pilot hole with a ³/ 32 in. (2.38 mm) drill. Use (4) #10 x 1½ in. (M5 x 38 mm) pan-head wood screws. • Wallboard Mounting: Mount to ⅜ in. (9.5 mm) or thicker wallboard. Drill pilot hole with a ½ in. (12.7 mm) drill. Use (4) #10 x 2½\...$

$Page 33 Appendices English - 33 Appendix D: Using a desktop computer to connect to the network If you have a desktop computer, temporarily move the SA-4 amplifier near the computer to set up the network connection. The diagram below shows how to temporarily set up your SA-4 amplifier \ and SoundTouch ™ wireless adapter near your desktop computer. Once you have the components in place, follow the procedures in this guide to connect to your network using the desktop computer. After making the network...$

View all the pages

Add page 31 to Favourites

image text

Enable zoom

							Appendices
English - 31
Note:  Mounting hardware must be purchased separately. If the mounting  
hardware instructions differ from these instructions, follow the mounting 
hardware instructions.
•	 	Wood	Mo\fnting: Mount to 1 in. (25.4 mm) or thicker wood. Drill pilot  
hole with a ³/
32 in. (2.38 mm) drill. Use (4) #10 x 1½ in. (M5 x 38 mm)  
pan-head wood screws. 
•	  Wallboard Mounting: Mount to ⅜ in. (9.5 mm) or thicker wallboard.  
Drill pilot hole with a ½ in. (12.7 mm) drill. Use (4) #10 x 2½\
 in.  
(M5 x 63.5 mm) pan head machine screws and (4) #10 (M5) spring anchors.
1 in. (25.4 mm) minimum 
Wood
³/8 in. (9.5 mm) minimum 
Wallboard

Add page 32 to Favourites

image text

Enable zoom

							Appendices
32 - English
Appendix C: Wall mounting the  
SoundTouch™ wireless adapter
Vertical 
orientation
 
Connector 
panel is 
facing left.Horizontal 
orientation
 
Connector panel  
is facing up.
Follow these instructions to wall mount your SoundTouch™ wireless adapter. Install 
either vertically with the connector panel facing left, or horizontally with the con-
nector panel facing up.
Note:   Mounting hardware must be purchased separately. If the mounting  
hardware instructions differ from these instructions, follow the mounting 
hardware instructions.
•	  Wood Mounting: Mount to 1 in. (25.4 mm) or thicker wood. Drill hole with  
a ⅛ in. (3.17 mm) drill. Use (2) #8x1¼ in. (32 mm) pan-head wood s\
crews. 
•	  Wallboard Mounting: Mount to ⅜ in. (9.5 mm) or thicker wallboard. Drill 
pilot hole with a ³/
16 in. (4.76 mm) drill. Use (2) #6-8x1 in. (25.4 mm) plastic 
wall anchors, and (2) #8x1¼ in. (32 mm) pan-head wood screws.
¼ in. (6.35 mm)  
above surface
Wood
¼ in. (6.35 mm)  
above surface
Wallboard
1.  Mark holes on the wall 6¼ in. (158.7 mm) center-to-center. 
2.  Drill holes. Insert anchors (if used).
3.  Install screws. Leave the screw heads ¼ in. (6.35 mm) above wall surface.
4.  Position SoundTouch
™ wireless adapter onto screws. Press firmly into place.

Add page 33 to Favourites

image text

Enable zoom

							Appendices
English - 33
Appendix D: Using a desktop computer to 
connect to the network
If you have a desktop computer, temporarily move the SA-4 amplifier near the 
computer to set up the network connection. 
The diagram below shows how to temporarily set up your SA-4 amplifier \
and  
SoundTouch
™ wireless adapter near your desktop computer. 
Once you have the components in place, follow the procedures in this guide to 
connect to your network using the desktop computer. After making the network 
connection, you can test the system to make sure everything works. 
When you are done, disconnect the amplifier from your computer and AC (mains) 
power and permanently install the SA-4 amplifier. When you reconnect the system 
to AC (mains) power, it reconnects to your network. 
See “Installing the SoundTouch
™ SA-4 amplifier” on page 13. 
USB cable
BoseLink 
cable
AC power 
cord
Note:  Connect the USB cable to the SoundTouch™ wireless adapter only  
when the app instructs you to do so.

Add page 34 to Favourites

image text

Enable zoom

							©2013 Bose Corporation, The Mountain, 
Framingham, MA 01701-9168 USA 
AM625304 Rev. 00

All Bose manuals Comments (0)