Bose Lifestyle V30 Owners Guide

							English
27
Special function buttons Teletext mode buttons (Europe only)
List  – Activates the A, B, C, and Favorites 
buttons at the bottom of the remote when a 
DVR is the source.
Makes a selection from List A.
Makes a selection from List B.
Makes a selection from List C.
Displays a list of favorite channels, 
if your TV supports this feature.
Te l e t e x t   – Enters or exits the Teletext mode 
when the TV is selected as the source. Works 
in conjunction with the four colored buttons.
Red – In Teletext mode , selects the 
content labeled red.
Green  – In Teletext mode , selects 
the screen content labeled green.
Ye l l o w  – In Teletext mode , selects 
the screen conten t labeled yellow.
Blue  – In Teletext mode , selects the 
screen content labeled blue.
SETUP
 
						

							28
English DanskEpañolDansk Epañol
English
OPERATION
Watching TV
Your Lifestyle® system works with many different types 
of TVs, from standard definition to Digital High-
Definition TV (HDTV). This section shows you how to 
set up your Lifestyle
® system remote control to work 
with your particular brand of TV, then configure the 
sensor so your TV automatically turns on when you 
press the On/Off button on the remote. 
Setting up the Lifestyle® remote to control 
the TV
Before you can control the TV, you must first select the 
correct TV code by following the steps below.
1. Turn on the TV. 
2. On the Lifestyle
® remote, press  TV. (See “The 
remote control” on page 21 for information on 
operating the remote.)
3. To display the Lifestyle
® system menu on the TV, 
press  System .
The message “SYSTEM: SEE TV” should appear 
on the Lifestyle
® system display module.
Use the remote supplied with the TV to select the 
video input that allows you to see the Lifestyle
® 
system menu. 4. To select the Setup tab, move right and select  , 
then press ENTER .
5. Move down to  TV Brand and press ENTER .
6. Select the brand of your TV from the list and press  ENTER .
7. Move down to TV Code and press ENTER .
8. Select the first TV code in the list.
9. Press the (TV)  On/Off button (located under the TV 
button). 
 If the TV turns off, you have chosen the  correct code. 
 If the TV does not turn off, select the next code  and press (TV)  On/Off again. 
Continue select ing codes until you find one 
that works.
10. When you have a working code, enter it below, then  press  ENTER .
TV Code: ____________________
11. To exit the system menu, press  Exit.
 
						

							OPERATION
English
29
Selecting the TV screen shape
The shape of your TV screen is either Normal or 
Widescreen (Figure 15). The Lifestyle® system is initially 
set to display an image on a widescreen-shaped TV. If 
your TV is the normal shape, you should adjust the 
Lifestyle
® system setting from widescreen to normal.
Figure 15  TV screen shapes
1. Display the Lifestyle® system menu on the TV by 
pressing  System.
2. To select the Setup tab, move right and select  ,  then press ENTER .
3. Move down to  Widescreen TV and press ENTER.
4. To indicate that you have a normal TV, select  No 
and press  ENTER.
5. To exit the System menu, press  Exit.
Setting the audio delay compensation
You may notice that the audio is delayed relative to the 
video. For example, a person’s lips move but there is a 
noticeable delay until you hear the voice. You can use 
the Audio Delay setting to correct this condition.
To change the audio delay:
1. Use the Lifestyle
® remote to display the Settings 
menu on the display module or TV by pressing 
Settings .
2. Move down and select  , then press  ENTER.
3. Select a value by moving up or down the list, then  press  ENTER .
The initial setting is 2  (to compensate for the 
Lifestyle
® system internal delay). Each value (1-8) 
adds 30 milliseconds of delay.
4. To exit the Settings menu, press  Exit.
Note: Under most listening conditions, you should keep 
the volume on your TV set turned all the way down.
Changing the HDMI Image View
You can specify how certain display formats appear on 
your HDTV screen. You control these formats (that are 
output from your Lifestyle
® system) by pressing the 
Image View  button on the remote . See “Controlling the 
(HDMI) Image View” on page 38 and “Settings Options” 
on page 44 for information an d illustrations on changing 
the HDMI Image View.
Normal Widescreen
 
						

							OPERATION
30
English DanskEpañolDansk Epañol
English
Controlling a cable or satellite box
Once your cable or satellite box is connected to your 
Lifestyle® system, you can set up the remote as the 
single point of control for  your subscription service.
Programming the Bose® remote to turn the 
cable or satellite box on or off
Setting up the remote to control the cable or satellite 
box involves selecting the c orrect cable or satellite box 
code.
1. Turn on the TV.
On the TV, select the video input that is connected 
to the Lifestyle
® system.
2. Turn on the cable or satellite box.
3. To display the Lifestyle
® system menu on the TV, 
press  System . (See “The remote control” on 
page 21 for information on operating the remote.)
4. To select the Setup tab, move right and select  ,  then press ENTER .
5. Move down to  CBL
•SAT Device and press 
ENTER .
6. Select the correct device type from the list and  press  ENTER .
If you are unsure of the device type, see the 
owner’s manual for that device. 7. Move down to 
CBL
•SATBrand  and press  ENTER.
8. Select the brand of your device from the list and  press  ENTER .
9. Move down to  CBL
•SAT Code and press  ENTER.
10. Select the first code in the list.
11. On the Lifestyle
® remote, press the (CBL-SAT)  
On/Off  button, located under the CBL-SAT button. 
 If the device turns off, you have chosen the  correct code. 
 If the device does not turn off, select the next  code and press (CBL-SAT)  On/Off again. 
Continue select ing codes until you find one 
that works.
12. When you have a working code, enter it below, then  press  ENTER .
CBL-SAT Code: ____________________
13. To exit the system menu, press  Exit.
 
						

							OPERATION
English
31
Using the remote to change channels
If you want the remote to change the channels on your 
cable or satellite box when you are watching TV:
1. To display the Lifestyle
® system menu on the TV, 
press  System .
2. Move down to  TV Control and press  ENTER.
3. Select CBL
•SAT  and press  ENTER.
Setting TV Control to CBL-SAT configures the 
remote to control both th e TV and cable or satellite 
box when the source is TV.
4. To exit the system menu, press  Exit.
You now can use your Lifestyle
® remote to control your 
cable or satellite box. 
Changing the HDMI Image View
You can specify how certain display formats appear on 
your HDTV screen. You control these formats (that are 
output from your Lifestyle
® system) by pressing the 
Image View  button on the remote. See “Controlling the 
(HDMI) Image View” on page 38 for information and 
illustrations on changing the HDMI Image View.
About the HDMI video resolution
When your Lifestyle® system is connected to an HDTV 
using the HDMI connector, the video is transmitted at 
the highest possible resolution. Occasionally, you may 
want to specify a lower resolution, even though your 
HDTV can display a higher resolution. For example, a 
certain source signal may be unpleasant to your eye 
when converted by the Lifestyle
® system to a much 
higher resolution. In that case, you can change to a 
lower resolution. See “Changing the HDMI video 
resolution” on page 41 for information on changing the 
HDMI video resolution.
 
						

							OPERATION
32
English DanskEpañolDansk Epañol
English
Controlling DVD playback
Once your DVD player is connected to the Lifestyle® 
system, you can set up the Lifestyle® remote control to 
control the DVD player.
Programming the Lifestyle® remote to con-
trol the DVD player
Setting up the remote to control the DVD player 
involves selecting the correct DVD code, then setting 
the DVD to turn on automatically when your Lifestyle
® 
system is turned on.
1. Turn on the TV.
On the TV, select the video input that is connected 
to the Lifestyle
® system.
2. Turn the DVD player on.
3. On the Lifestyle
® remote, press  TV. (See “The 
remote control” on page 21 for information on 
operating the remote.)
4. To display the Lifestyle
® system menu on the TV, 
press  System .
5. To display the Setup menu, select  , then press  ENTER .
6. Move down to  DVD Device and press ENTER.
7. Move up or down to select the type of device from  the list and press  ENTER.
8. Move down to  DVD Brand and press  ENTER. 9. Select the brand of your device and press 
ENTER.
10. Move down to  DVD Code and press ENTER.
11. Select the first device code in the list.
12. On the Lifestyle
® remote, press the (DVD)  
On/Off  button, located under the DVD button. 
 If the DVD turns off, you have chosen the correct  code. 
 If the DVD does not turn off, select the next  code and press DVD On/Off again.
Continue select ing codes until you find one 
that works.
13. When you have a working code, enter it below, then  press  ENTER .
DVD Code: ____________________
14. To exit the system menu, press  Exit.
 
						

							OPERATION
English
33
Changing the HDMI Image View
You can specify how certain display formats appear on 
your HDTV screen. You control these formats (that are 
output from your Lifestyle
® system) by pressing the 
Image View  button on the remote. See “Controlling the 
(HDMI) Image View” on page 38 for information and 
illustrations on changing the HDMI Image View.
About the HDMI video resolution
When your Lifestyle® system is connected to an HDTV 
using the HDMI connector, the video is transmitted at 
the highest possible resolution. Occasionally, you may 
want to specify a lower resolution, even though your 
HDTV can display a higher resolution. For example, a 
certain source signal may be unpleasant to your eye 
when converted by the Lifestyle
® system to a much 
higher resolution. In that case, you can change to a 
lower resolution. See “Changing the HDMI video 
resolution” on page 41 for information on changing the 
HDMI video resolution.
 
						

							OPERATION
34
English DanskEpañolDansk Epañol
English
Setting up to view videotapes
Once your VCR is connected to your Lifestyle® system, 
you can set up the remote to control the VCR and start 
watching videotapes. 
Setting up the Bose® remote to control 
the VCR
Setting up the remote to control the VCR involves 
selecting the correct VCR code, then setting the VCR to 
turn on automatically when your Lifestyle
® system is 
turned on.
1. Turn on the TV.
On the TV, select the video input that is connected 
to the Lifestyle
® system.
2. Turn on the VCR.
3. On the Lifestyle
® remote, press  TV. (See “The 
remote control” on page 21 for information on 
operating the remote.)
4. Press  System to make the system menu appear 
on the TV.
5. To display the Setup menu, select  , then  press  ENTER . 6. Move down to 
VCRDevice  and press  ENTER.
7. Select the type of device from the list and  press  ENTER .
8. Move down to  VCRBrand  and press  ENTER.
9. Select the brand of your device and press  ENTER.
10. Move down to  VCRCode  and press  ENTER.
11. Select the first device code in the list.
12. Press the (VCR)  On/Off button (located under the 
VCR button). 
 If the VCR turns off, you have chosen the correct  code. 
 If the VCR does not turn off, select the next  device code and press VCR On/Off again.
Continue select ing codes until you find one 
that works.
13. When you have a working code, enter it below, then  press  ENTER .
VCR Code: ____________________
14. To exit the system menu, press  Exit.
You can now use the Lifestyle
® remote to control your 
VCR.
 
						

							OPERATION
English
35
About the HDMI video resolution
When your Lifestyle® system is connected to an HDTV 
using the HDMI connector, the video is transmitted at 
the highest possible resolution. Occasionally, you may 
want to specify a lower resolution, even though your 
HDTV can display a higher resolution. For example, a 
certain source signal may be unpleasant to your eye 
when converted by the Lifestyle
® system to a much 
higher resolution. In that case, you can change to a 
lower resolution. See “Changing the HDMI video 
resolution” on page 41 for information on changing the 
HDMI video resolution.
 
						

							OPERATION
36
English DanskEpañolDansk Epañol
English
Setting up an auxiliary (AUX) source
Once your AUX source device is connected to the 
Lifestyle® system, you can set up the remote to control 
that source. Then, when you are watching video from 
that source, the Lifestyle
® remote should control most 
of the functions of that source.
Setting up the Bose® remote to control the 
AUX device
Setting up the remote to control the AUX device 
involves selecting the correct AUX device code, then 
setting the AUX device to turn on automatically when 
the Lifestyle
® system is turned on.
1. Turn on the TV.
On the TV, select the video input that is connected 
to the Lifestyle
® system.
2. Turn on the AUX device.
3. On the Lifestyle
® remote, press  AUX.
4. Make the system menu appear on the TV by  pressing  System.
5. Move across the menu tabs to  Setup by pressing 
the right arrow.
6. Move down to  AUXDevice  and press  ENTER. 7. Select the type of device from the list and press 
ENTER .
8. Move down to  AUXBrand  and press  ENTER.
9. Select the brand of your device and press  ENTER.
10. Move down to  AUXCode  and press  ENTER.
11. Select the first device code in the list.
12. Press the (AUX)  On/Off button (located under the 
AUX button). 
 If the AUX device turns off, you have chosen the  correct code. 
 If the device does not turn off, select the next  code and press (AUX)  On/Off again.
Continue select ing codes until you find one 
that works.
13. When you have a working code, enter it below, then  press  ENTER .
AUX Code: ____________________
14. To exit the system menu, press  Exit.
You can now use the Lifestyle
® remote to control your 
auxiliary device.