Bose 321 GS Series II DVD home entertainment system Sold from July 2004 to present User Manual

SYSTEM
 C
ONTROLS AND
 INDICATORS
31
SYSTEM CONTROLS AND INDICATORS
Dansk Italiano SvenskaDeutsch Nederlands English FrançaisEspañol
To set up the remote to control your cable/satellite box
1.Turn on both the 3•2•1 system and your cable/satellite box.
2.
Press and hold the CBL‡SAT button until the remote LED is lit (about five seconds).
3.On the remote keypad, enter the four-digit device code for your cable/satellite box. The 
LED will turn off temporarily as you press each key.
4.Check that the LED...

32
SYSTEM
 C
ONTROLS AND
 INDICATORS
SYSTEM CONTROLS AND INDICATORS
Dansk Italiano Svenska DeutschNederlands EnglishFrançais Español
To set up the remote to control your cable/satellite box
1.Turn on both the 3•2•1 system and your cable/satellite box.
2.
Press and hold CBL‡SAT until the remote LED is lit (about five seconds).
3.
Alternately press Channel and CBL‡SAT On-Off until your cable/satellite box 
turns off.
4.
Press Enter. Check that the remote LED turns off.
5.
Point the remote at your...

SYSTEM
 C
ONTROLS AND
 INDICATORS
33
SYSTEM CONTROLS AND INDICATORS
Dansk Italiano SvenskaDeutsch Nederlands English FrançaisEspañol
Verifying an entered device code
In case you need to check to see what code the remote is using for a particular audio device, 
do the following:
1.Press and hold a source key (TV,CBL‡SAT, or AUX) until the remote LED lights (about 
five seconds)
2.
Press the Info button.
3.Press 1 on the remote and count the number of times the LED blinks (zero is indicated by 
a long...

34
SYSTEM
 C
ONTROLS AND
 INDICATORS
SYSTEM CONTROLS AND INDICATORS
Dansk Italiano Svenska DeutschNederlands EnglishFrançais Español
The media center
The media center has a control panel on the top, a display area to show the current status of 
the system, and a disc tray that opens on the front of the console.
Control panel
The media center has six buttons located on the top control panel. Their functions are also 
available through use of the remote control.
Figure 21
Media center controls
®
On-Off...

35
OPERATION
Dansk Italiano SvenskaDeutsch Nederlands English FrançaisEspañol
OPERATION
Turning your system on and off
To turn power on or off:
• Point the 3•2•1 remote at the media center and press On/Off.
OR
• Press On-Off on top of the media center.
To turn the system on to a source:
• Press CD-DVD,FM-AM,TV,CBL‡SAT, or AUX on the 3•2•1 remote.
Note:
Your 3•2•1 remote control can be set up to control other audio devices such as your TV, 
VCR, or cable/satellite receiver. For instructions, see “Setting...

36
OPERATION
OPERATION
Dansk Italiano Svenska DeutschNederlands EnglishFrançais Español
While a DVD video is playing, elapsed play time and chapter number are displayed on the 
media center front panel.
Figure 23
Sample display for
a DVD videoDVD 0:06:11
CHAPTER 1/12
Basic DVD operations
•
OR
Eject
Press Pause to pause a movie.
• Press Pause again, or press Play to resume playing a paused DVD.
• Use the stop button (
) to interrupt a movie in play.
• Press 
 once to interrupt a playing movie. The system...

OPERATION
37
OPERATION
Dansk Italiano SvenskaDeutsch Nederlands English FrançaisEspañol
Playing audio CDs
1.
Eject
Eject
On the 3•2•1 remote, press CD/DVD to turn the 3•2•1 system on to the CD/DVD source.
2.On the media center control panel, press Eject to open the disc tray.
3.Place the CD disc in the disc tray.
4.Press Eject again to close the tray.
5.The audio CD should begin to play automatically. If not, press Play on the 3•2•1 remote.
Basic CD operations
•
OR
Press Pause to pause an audio CD.
•...

38
OPERATION
OPERATION
Dansk Italiano Svenska DeutschNederlands EnglishFrançais Español
Listening to FM/AM radio
On the 3•2•1 remote, press FM-AM. If the system is off, the radio will turn on to the most 
recently selected station.
Tuning to a station
You can tune to a radio station in any of the following ways:
•
Press FM-AM to switch between the FM and AM bands.
• Press Tune
 to tune up the band. Press Tu n e to tune down the band.
• Press Seek
 to go to the previous station. Press Seek to go to the...

OPERATION
39
OPERATION
Dansk Italiano SvenskaDeutsch Nederlands English FrançaisEspañol
Erasing a preset
1.Tune to the preset station.
2.Press and hold the 0 button on the remote until the media center display tells you that 
the preset is erased.
Playing other sources
Turn on any component connected to the media center by using the remote for that compo-
nent or controls on the component front panel. Use the 3•2•1 Series II or 3•2•1 GS Series II 
system remote to get started:
• Pressing TV, CBL‡SAT, or...

40
CHANGING
 SOURCE
 SETTINGS
Dansk Italiano Svenska DeutschNederlands EnglishFrançais Español
CHANGING SOURCE SETTINGS
Using the settings menus
While watching a video or listening to music on your system, you can make quick adjust-
ments that will increase your enjoyment of the program. For that purpose, each source you 
use with this system has its own Settings menu with features appropriate to that source.
To view the settings menus
You can see the Settings menu for each source on your TV screen...