Bosch WAQ 24440 User Manual

							123456
yo
7 - 90 °CV (temp. ºC)
Select the temperature ( 7 = cold)
1 - 24 h  (Ready in) End of programme after ...
 - 1400*c	 (rpm) Select the spin speed (* depending on the model) or
  c(without final spin, 
laundry soaks in the last rinsing water, display pa nel - - - )
Status displays Programme sequence displays:
1üü2 üü	c ü- ¯- Wash, rinse, spin, programme duration or end (-0-)
(Childproof lock apage 5
,Open the washing machine door, reload laundry apages 4, 5
End of programme when ...
... Start/Reload $flashes and 
-¯-  appears on the display panel.
Note : If display panel lighting is switched off, press a ny button a Energy 
saving mode,  page 5.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  2cRinse /  	Spin.
– Press  Start/Reload 
$.
Programmes at lower temperatures: 
– Select  2
cRinse  / 	
Spin  (deactivate2(Extra rinse)  button) or 
>
Empty .
– Press  Start/Reload $.
Changing the programme if ...
... you have selected the wrong programme by mistake: 
– Reselect the programme. 
– Press  Start/Reload 
$. The new programme starts from the beginning.
Reloading laundry if ... apage 5
... Press Start/ Reload$;both  the symbols „§‚+,  are displayed on 
the display panel. If  ǯ is lit, the washing machine door cannot be opened.
Press  Start/ Reload 
$.
Correct installation according to the separate  
installations actions.
Checking the machine
– Never use a damaged machine! 
– Contact customer service!
Connecting the mains plug
Make sure your hands are dry!  
Handle the plug only!
Turning on the tap
Compartment II
: detergent for the main wash, water softener,
bleach, stain remover
Sorting and loading laundry
Follow the manufacturers care information!
Sort laundry according to the labels indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load 
aPage 7.
Observe important information!aPage 6
Wash laundry of different sizes in the same wash prog ramme.
Close the door. Take care not to trap items of laund ry between the washing machine door and
seal.
 Add detergent and care products
Measure detergent according:
amount of laundry, soiling, water hardness (ask your  water supply company) and
manufacturers instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and  place in the drum.
Your washing machine
Congratulations on having opted for a modern, high-quality domestic a ppliance 
manufactured by Bosch. This washing machine is distin guished by its economical 
energy consumption. 
Each machine that leaves our factory has been inspect ed thoroughly to ensure that it 
functions properly and is in perfect condition. 
For further information on our products, accessories,  spares and services, consult our 
website www.bosch-home.com or contact any of our custom er service centres.
You can find the contact details for your nearest af ter-sales service here or in the after-
sales service directory (depending on model). – GB  0844 8928979  (calls from a BT landline will be charged at up to 3 pence 
per minute. A call set-up fee of up to 6 pence may app ly)
– IE  01450 2655
Environmentally friendly waste disposal 

All packaging must be disposed of in accordance with  environmental guidelines.
This appliance is certified in accordance with Europ ean Directive 2002/96/CE on the 
waste electrical and electronic equipment (WEEE). 
This directive provides the framework for the EU-wid e collection and reuse of used 
appliances.
Intended use
ContentsPage 
‹Intended use  ...................................... ................................................. 1
‹Programmes ......................................... ............................................... 1‹Setting and adjusting the programme  ............... ............................ 3
‹Washing ........................................................................................... 3/4
‹After washing ..................................... ................................................. 4‹Individual settings  ............................... ........................................... 5/6
‹Important information  ............................. .......................................... 6
‹Overview of programmes  ............................. ................................... 7‹Safety instructions  ............................................................................. 8
‹Consumption values  ................................ ......................................... 8
‹Care and cleaning  ............................................................................. 9‹Information on the display panel  .................. .................................. 9
‹Maintenance  .................................................................................... 10
‹What to do if ...  ................................................................................ 11

Protection of the environment/Conservation tips– Always fill the washing machine with a maximum amoun t of 
laundry for the relevant programme.
– Wash normally soiled laundry without a pre-wash. 
– Instead of  Cottons L
F 90 °C
, choose the programme 
Cottons LF 60 °C with the additional function  EcoPerfect j.
Comparable cleaning result was significantly lower en ergy 
consumption.
– Measure the detergent according to the manufacture rs 
instructions and water hardness.
– If the laundry is then dried in the tumble dryer,  select spin speed 
according to instructions of dryer manufacturer.
Preparation Before the first wash,
run a wash cycle with no laundry in the machine  aPage 9.
Setting** and adjusting programmes
Display panel /  
option buttonsProgramme selectorStart /
Reload
Programme selector for  
switching the machine on  
and off and for selecting the  
programme. Can be turned  
in either direction.
ProgrammesDetailed overview of programmes apage 7 .
Temperature and spin speed can be selected individu ally, 
irrespective of the selected programme and programme  
progress.
Cottons  LFhard-wearing fabrics
+ Prewash  7hard-wearing fabrics, prewash
Easy-Care Isynthetic fabrics
+ Prewash 7synthetic fabrics, prewash
Mix LIFDifferent types of laundry
Delicate/Silk  “Delicate washable fabrics
ÿWool /Hand/machine washable wool
2Rinse / 
Spin  	Laundry washed by hand,  2(Extra rinse) button 
activated; if only using the spin cycle, deactivate  the 
button
>EmptyDrain rinsing water with  c(without final spin)
| Butter/Oil
† Red WineHard-wearing and easy-care fabrics, special stain  
programme apage 5
… Tomatoes
Super Quick 15’  6Short programme
Shirt/Blouses ’No-iron shirts
Dark Wash Hard-wearing fabrics
**If the ( symbol flashes in the 
display panel, the childproof lock is  
active 
aDeactivate childproof lock,
page 5 .
For stain programmes, additional  
functions and option buttons 
aIndividual settings,  page 5.
Press  Start/Reload  $
Washing
1
2
Removing the washing
Open the washing machine door and remove the washin g.
If    (without final spin) is active: turn the programme  selector to 
>
Empty  or select the spin speed. 
Choose  Start/Reload $.
– Remove any foreign objects. Risk of rusting. 
– Leave the washing machine door and detergent door ope n 
so that any residual water can evaporate. 
Turn the tap off
Not required for Aqua-Stop models aRefer to Installation instructions .
Switching off
Turn the programme selector to  Off.
Washing
Compartment ~: Fabric softener, bleach
Compartment I : Detergent for prewash
‹for domestic use only,
‹for washing machine-washable fabrics and  
hand-washable wool in detergent solution, 
‹to be operated with cold or cold and hot (max. 60 º C) 
drinking water, depending on model, and commercially  
available detergents and care products which are sui t-
able for use in washing machines.
.
– Do not leave children unattended near the 
washing machine.
– The washing machine is not to be used by  children or persons not familiar with the  
operating instructions.
– Keep pets away from the washing machine.
Dilute viscous fabric softener and fabric condition er with water. 
This prevents blockages.
Individual settings
‘Option buttons
You can change the spin speed and the temperature b efore the selected programme starts and while it is running. The 
effects depend on the programme progress.
‘V (Temperature  °C)
You can change the displayed washing temperature. T he maximum selectable temperature depends on the cu rrent 
programme.
‘ (Ready in)
When you select the programme, the relevant programme d uration is displayed. You can delay the end of the 
programme before it begins. The ready in-time can be  set in increments of one hour up to a maximum of 24 hours. Press 
the  
 (Ready in)  button until the required number of hours is displ ayed (h = hour). Choose Start/Reload $.
‘	 (spin speed in rpm/   (without final spin))
You can change the displayed spin speed. The maximu m selectable spin speed depends on the model and wh ich 
programme is currently selected. 
‘Additional functions aand overview of programmes , page 7
SpeedPerfect iFor washing in a shorter time with a washing outcom e comparable to that of the standard 
programme. Maximum load  aOverview of programmes,  page 7.
EcoPerfect j For saving energy with a washing performance compar able to that of the standard programme.
S (Reduced Ironing) Special spin sequence with subsequ ent fluffing. Gentle final spin: residual moisture in the laundry 
slightly increased.
2
(Extra rinse) Additional rinse cycle. For areas with  very soft water or for further enhancing the spin result.
‘Childproof lock
(in the display panelYou can lock the washing machine to prevent the fun ctions you have set from being changed 
inadvertently.  ON/OFF: after the start/end of the programme, press the St art/Reload $button 
for five seconds. 
Note : the childproof lock can remain activated until yo u wish to start the next programme, even 
after switching off the machine.
Then you can deactivate the childproof lock before  the start of the programme and activate it again 
as necessary once the programme has started.
If you wish to turn off the childproof lock during  a programme, turn the programme selector to the 
position in which the machine is locked (the symbol  ( remains lit). Turning it off in any other 
position will cancel the programme in progress.
‘Reloading
„§‚+ o,
in the display panel Press Start/
Reload$if you want to add additional items of laundry after the  programme has 
started. The machine checks whether reloading is possi ble.
„
§‚+ ,  lit: reloading is possible.
ǯ flashes: wait until  „§‚+,  lights.
Note : do not open the door until  both the „
§‚+,  symbols are lit.
Ç
¯: it is not possible to reload.
Note : for safety reasons, the washing machine door rema ins locked when the water level and/
or temperature is high, or during spinning. 
To continue the programme, press the  Start/Reload 
$button.
‘Stain programmes
Do not let stains dry. Remove any solid residue bef orehand. Sort items of laundry as usual and load th e washing machine. 
The washing machine adjusts the washing temperature , drum movement and soaking times to suit the type of stain. Hot 
or cold water, gentle or intensive washing control  (thanks to the new drum structure) and a long or sh ort soaking time 
ensure that the wash programme has a special sequen ce for each type of stain. 
The result: optimum stain treatment without the use  of additional special detergents.
‘Energy saving mode
The display panel lighting goes out after a few minutes, Start/Reload$flashes. Press any button to switch on the 
lighting.
‘Start/Reload$
To start the programme or to subsequently load addi tional laundry, and to activate/deactivate the childproof lock.
Individual settings  z
‘Signal
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders,  additives and cleaning agents, you must follow the 
manufacturers instructions..
– Empty all pockets 
– Check for metal items (paper-clips, etc.). 
– Wash delicates in a laundry bag (tights, curtains, un derwired bras).
– Fasten zips, do up any buttons. 
– Brush sand out of pockets and collars. 
– Remove curtain fittings or place in the laundry bag .
 Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additi onal function SpeedPerfect .i
Pre-treat any stains as necessary. 
intense wash Load less laundry. Choose a programme wi th a prewash.
Soaking       Load laundry of the same colour.
Pour soaking agent/detergent into compartment  II in accordance with the manufacturers instructions.  Turn the 
programme selector to  Cottons L
F
30 °C  and press  Start/Reload $. After approx. 10 minutes, press 
Start/ Reload$to pause the programme. Once the required soaking time  has elapsed, press Start/Reload$again 
to continue the programme, or select a different program me.
Starch      Laundry should not be treated with fabric softener.  
Starching is possible in all wash programmes if liqu id starch is used. Pour the starch in accordance with th e 
manufacturers instructions into fabric softener compa rtment ~ (rinse first if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantit ies. Salt may damage stainless steel. Always follow the dye 
manufacturers instructions. Do  not use the washing machine for bleaching clothes.
Insert for liquid detergent    depending on model
Position the insert for dispensing liquid detergent :
– Remove the detergent drawer completely  apage 9
– Slide the insert forwards and click into place. 
Do not use the insert (slide upwards): for gel dete rgents and washing powder, 
for programmes with  + Prewash7
 and End time option.
Set to • 1 step, the  
display panel  
lights up press and  
hold
+1 step, release
set to •
setting the 
volume*
setting the 
volume* 1 step
* if necessary, select the  
function several times
1.
Activating the mode  
for setting the signal  
volume
2.Setting the volume  
for...
direct
Button signals Information signals
j
j
All buttons are sensitive and need  
only to be touched lightly. Press and  
hold the 
(Ready in) option button 
for an automatic run through all 
setting options.
Additional  functions
3
Detergent drawer with  
compartments  I, II, ~
Door
Drum
Control panel
Service door
123456
Insert for liquid detergent (depending on model)  apage 6
            
						

							7
Overview of programmes aRefer to the table of consumption values on page 8,  and advice and warnings on page 6.Programmes °C max. Type of laundry
Additional functions; InformationCottons L
F
7 - 90 °C 7 kg/ 
4 kg*hard-wearing fabrics, cottons or linen that can be 
washed 
at 90°C SpeedPerfect 
i*, EcoPerfect j,S (Reduced Ironing), 
2
(Extra rinse) 
+ Prewash 7Easy-Care I
7 - 60 °C
3.5 kgeasy-care cotton, linen, synthetic or blended fabri
cs
SpeedPerfect  i
, EcoPerfect j,S (Reduced Ironing), 
2
(Extra rinse)
+ Prewash 7Mix L
IF
7 - 40 °C cotton or synthetic fabrics SpeedPerfect
i, EcoPerfect  j,S (Reduced Ironing), 
2
(Extra rinse);
different types of laundry can be washed together
Dark Wash 
7  - 40 °C dark cotton and dark synthetic fabrics SpeedPerfect
i, EcoPerfect  j,S (Reduced Ironing), 
2
(Extra rinse);
reduced rinse and final spin cycle
| Butter/Oil
7  - 60 °C hard-wearing and easy-care fabrics
S(Reduced Ironing)
;optimum stain treatment a
page 5
† Red Wine… TomatoesShirt/Blouses 
’
7 - 60 °C
2 kg
non-iron shirts made of cotton, linen, synthetic fi bres or 
blended fabrics
SpeedPerfect i, EcoPerfect j,S (Reduced Ironing), 
2
(Extra rinse)
;
S(Reduced Ironing)
: spin only, hang up dripping wet
Delicate/Silk 
“
7 - 40 °C for delicate fabrics, e.g., silk, satin, synthetic 
fibres or 
blended fabrics (e.g. curtains) SpeedPerfect
i, EcoPerfect j,S (Reduced Ironing), 
2
(Extra rinse): 
no spin between rinse cycles
ÿ Wool  /
7 - 40 °C hand/machine washable wool particularly delicate wash programme to avoid shrin
kage of laundry; 
longer programme breaks (fabrics rest in the deterge nt solution)
Super Quick 15’ 6
7 - 40 °C synthetic cotton, linen, synthetic fibres or blende
d fabricsShort programme of approx. 15 minutes,  
suitable for lightly soiled laundry
Additional programmes
2
Rinse/Spin  	
,>
Empty
* reduced load with additional function  SpeedPerfecti.
‘
As  a short programme Mix  L
IF 40 °Cwith a maximum spin speed, is ideal.
For programmes without prewash, add detergent to co mpartment II. For prewash programmes, distribute the detergent  between compartments Iand  II.
9009 / 9000561979
9000561979
WAQ24440BY /...
Robert Bosch Hausgeräte GmbH CarläWery Str. 34
81739 Munich / Germany
8
Safety instructions
– Carefully read the instruction manual and the inform ation enclosed, and act accordingly.
– Keep the machines documentation for future referen ce.
Risk of electric shock!– Never pull the cable to disconnect the mains plug! 
– Never insert/disconnect the mains plug with damp ha nds.
Danger to life!For worn-out appliances: 
– Disconnect the mains plug. 
– Sever the mains cable and discard along with the p lug.
– Destroy the lock on the washing machine door. This  will prevent children from 
locking themselves in and risking their lives.
Danger of suffocation! – Keep packaging, film and packaging parts out of the r each of children.
Risk of poisoning!– Keep detergents and care products out of the reach  of children.
Risk of explosion!– Items of laundry pretreated with cleaning agents co ntaining solvents, e.g. stain 
remover/cleaning solvent may lead to an explosion a fter being loaded into the 
washing machine. 
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury! – The washing machine door may become very hot. 
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine. 
– Do not lean on the open washing machine door. 
– Do not reach into the drum if it is still rotating. 
– Be careful when opening the detergent drawer while  the machine is in operation.
 Consumption values   depending on model
Programme Additional function Load Electricity***Water***Programme
duration***
Cottons 

LF 7](cold)
7 kg 0.24 kWh 60 l 145 min 
Cottons

LF 30 °C**
7 kg 0.37 kWh 59 l 145 min 
Cottons

LF 40 °C**
7 kg 0.98 kWh 59 l 155 min
Cottons

LF 60 °C**
7 kg 1.15 kWh 59 l 165 min
Cottons

LF 90 °C
7 kg 2.10 kWh 69 l 155 min
Cottons

LF 60 °C 
EcoPerfect j* 7 kg 1.05 kWh 42 l 180 min
Easy-Care  I 40 °C**
3.5 kg 0.62 kWh 53 l 87 min
Mix LIF  40 °C**
3.5 kg 0.54 kWh 47 l 60 min
Delicate/Silk “ 30 °C
2 kg 0.19 kWh 34 l 41 min
Delicate/Silk “7](cold)
2 kg 0.05 kWh 35 l 41 min
Wool  / 30 °C 2 kg 0.17 kWh 39 l 40 min
Wool  /7] (cold) 2 kg 0.03 kWh 39 l 40 min
* Programme setting for testing and energy labelling  in accordance with EU directive 92/75/EEC.
** Programme setting for testing in accordance with  valid standard EN60456.
Note on comparative tests: For testing the test pro grammes, wash the specified load using the maximum  spin speed.
As a  short programme  for coloureds, select the programme  Mix L
IF40 °C  with the maximum spin speed.
*** The values deviate from the indicated values dep ending on water pressure, hardness, and inlet temperature, ambient temperature, 
type, amount and soiling of the laundry, detergent  used, fluctuations in the power supply and selected  additional functions.
9
Care and cleaning 
Before the first wash
Do not put laundry in the machine! Turn on the tap.  Put into compartment II:
– approx. 2 litres of water 
– detergent (measure according to the manufacturers  instructions for lightly soiled laundry and water hardness)
Turn the programme selector to  Easy-Care 
I60 °C and press Start/ Reload $. At the end of the programme, turn the 
programme selector to Off.
Machine housing, control panel
– Wipe with a soft, damp cloth. 
– Do not use any abrasive cloths, scourers or cleani ng agents (stainless steel cleaners). 
– Remove detergent and cleaning agent residue. 
– Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener res idues.
1.Pull out, press insert down and remove drawer compl etely.2.To remove the insert: press upwards from below with your finger.3.For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.4.Clean the detergent dispenser tray and inserts with  water and a brush and dry them.5.Attach the insert and engage (connect the cylinder  to the guide pin).6.Push in the detergent drawer.
Leave the detergent drawer open so that any residua l water can evaporate.
Drum
Leave the washing machine door open so that the dru m can dry out.For rust stains, use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of  detergent is used. If it is, descale the appliance according to the 
manufacturers instructions. Descaling products can  be acquired on the website or from customer services a Installation 
instructions .
Emergency release  (e.g. in the event of a power cut)
The programme continues to run when the power has b een restored. However, if the laundry has to be removed, the 
washing machine door can be opened as follows: 
Risk of scalding! 
The detergent solution and laundry may be hot. Let  it cool.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can b e seen through the glass.
1.Turn the programme selector to Off and disconnect the mains plug.2.Drain the detergent solution apage 10.3.Pull the emergency release downwards with a tool an d release.
The washing machine door can then be opened.
Information on the display paneldepending on model
,flashesClose the washing machine door properly; laundry ma y be caught.
§:³Å,
§: ›ÉTurn on the tap fully, supply hose kinked or trappe d;
Clean the filter  apage 10 , water pressure too low.
§:³µDetergent solution pump blocked; Clean the detergen t solution pump apage 10 .
Drainage hose / waste pipe blocked; Clean the drain age hose at the siphon apage 10 .
§:›´Water in the base tub, appliance leaking. Call cust omer services!
©:³¯Not a fault. Entry of unused hot water. Check hot w ater tap.
Childproof lock activated: to deactivate apage 5.
–Risk of electric shock!  Disconnect the mains plug.
– Risk of explosion! Do not use solvents.
910
Maintenance
Detergent solution pump
Turn the programme selector to  Off and disconnect the mains plug.
1. Using a screwdriver or the insert for liquid deterg ent 
(depending on model), open and remove the service f lap.
2. Remove the folding gutter and place a large enough  container underneath.
3. For models with a drainage hose:  Remove the drainage hose from the retainer and pul l it 
from the housing. 
Remove the sealing cap, allow the detergent solution  to flow out into the container. Replace 
the sealing cap and place the drainage hose in the  retainer.
3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the 
detergent solution begins to flow out on the foldin g gutter. When the container is full, close 
the pump cover and empty the container. Repeat the ab ove steps until all the detergent 
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be resid ual water).
5. Clean the interior, pump cover thread and pump hous ing (the impeller in the detergent 
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage hose (depending on model) and t he folding gutter to their start position.
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight in to the drain during the next wash: 
Pour 2 litres of water into compartment  II and then start the > Empty programme.
Drainage hose at the siphon
Turn the programme selector to  Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainag e hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connectio n with the hose clamp.
Filter in the water supply
Risk of electric shock! 
Do not immerse the Aqua-Stop safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose: 
1. Turn off the tap.
2. Select any programme (except  2
Rinse/Spin 	 / > Empty ).
3. Choose  Start/Reload 
$. Let the programme run for approximately 40 seconds .
4. Turn the programme selector to  Off. Disconnect the mains plug. 
Clean the filter:
5. Disconnect the hose from the tap. 
Clean the filter using a small brush.  
and/or  for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance. 
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
–Risk of burning!
Allow the detergent solution to cool.
– Turn off the tap.
11
What to do if...
‘Water is leaking out – Attach/replace the drainage ho se correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not dispensed. –
Start/Reload$not selected?
– Tap not turned on? 
– Filter blocked? Clean the filter apage 10 .
– Supply hose kinked or trapped?
‘The appliance door will not  
open. – Safety function active. Programme stopped? 
apage 4 .
–   (without final spin) selected?  apage 3, 4 .
– Can be opened by emergency release only?  apage 9 .
– Door locked after the washing machine is switched o ff: Switch on the washing 
machine and wait for 5 seconds.
‘The selected programme does  
not start. –
Start/Reload$or  (Ready in)  time selected?
– Washing machine door closed? 
– Childproof lock active? Deactivate  apage 5 .
‘Detergent solution is not  
drained. –
  (without final spin) selected?  apage 3, 4 .
– Clean the detergent solution pump  apage 10 .
– Clean the waste pipe and/or drainage hose.
‘No water can be seen in the  
drum. – Not a fault. Water remains inside below the visible area.
‘Spin result not satisfactory. 
Laundry wet/too damp.– Not a fault. Spin control system has stopped the spi
n cycle. Uneven distribution of 
laundry. 
Distribute large and small items of laundry evenly i n the drum.
– S (Reduced Ironing)  selected? apage 5 .
– Selected speed too low?  apage 5 .
‘Programme duration changes  
suddenly during operation. – Not a fault. The program time can vary according to
 the distribution of laundry, with 
it therefore being possible for the display panel to sh ow adjustments in the 
duration.
‘Spin cycle performed several  
times. – Not a fault. The balance control system has detected
 an imbalance and is 
attempting to redress this by repeating the spin.
‘Residual water in the  
compartment for care products. – Not a fault: the action of the care product is not 
affected.
– Clean the compartment if necessary  apage 9 .
‘Odour formation in the washing  
machine. – Run programme 
Cottons LF90 °C  without laundry. Use standard detergent.
‘Status display  1 flashing.
Appliance has detected a  
detergent overload. – Too much detergent used?
If foam is escaping from the detergent drawer: mix  1 tablespoon of fabric softener 
with ½ litre of water and pour into compartment  II(not with outdoor or down 
fabrics) .
– Reduce the detergent dosage for the next wash cycl e.
‘Intense noise formation,  
vibrations and wandering  
during the spin cycle.– Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions .
– Transportation safety devices removed? Remove transportation safety devices aInstallation instructions .
‘Display panel/indicator lamps  
remain turned off while the  
machine is working. – Energy-saving mode 
apage 5 .
– Power cut?
– Fuses triggered? Reset/change the fuse. 
– If the fault occurs repeatedly, call customer servic es.
‘Programme sequence longer  
than usual.– Not a fault. Unbalanced load detection system adjusts im
balance by repeatedly 
distributing the laundry.
– Not a fault: foam detection system active; adds an additi onal rinse cycle.
‘Detergent residues on the  
laundry.– Occasionally, phosphate-free detergents contain wate
r-insoluble residues.
– Select cRinse /Spin  	 or brush out the laundry after washing.
If you cannot correct a fault yourself or if a repa ir is necessary:
– Turn the programme selector to  Off and remove the mains plug from the socket.
– Turn off the water supply and call customer service sa Installation instructions.
Instructions for use
Washing Machine
en
Observe the safety instructions on page 8!
Read these instructions and the separate installation instructions before 
operating the washing machine.
                      
						

							12
yo
7 - 90 °CV (temp. ºC)
Select the temperature ( 7 = cold)
1 - 24 h  (Ready in) End of programme after ...
 - 1400*c	  (rpm) Select the spin speed (* depending on the model) or
c
laundry soaks in the last rinsing water, display pa
Status displays Programme sequence displays:
1 üü2 üü	c ü- ¯- Wash, rinse, spin, programme duration or end (-0-)
(Childproof lock 
apage 5
,Open the washing machine door, reload laundry  a
$¯
a
2c 	
$
2c 	2
>$
$
a
$ „
§‚,
ǯ
$
Correct installation according to the separate  
installations actions.
Checking the machine
– Never use a damaged machine! 
– Contact customer service!
Connecting the mains plug
Make sure your hands are dry!  
Handle the plug only!
Turning on the tap
Compartment II
: detergent for the main wash, water softener,
bleach, stain remover
a
a
Close the door. Take care not to trap items of laund
Your washing machine
Congratulations  on having opted for a modern, high-quality domestic ap pliance 
manufactured by Bosch. This washing machine is distin guished by its economical 
energy consumption. 
Each machine that leaves our factory has been inspect ed thoroughly to ensure that it 
functions properly and is in perfect condition. 
For further information on our products, accessories,  spares and services, consult our 
website www.bosch-home.com or contact any of our custom er service centres.
You can find the contact details for your nearest aft er-sales service here or in the after-
sales service directory (depending on model). – GB  0844 8928979  (calls from a BT landline will be charged at up to 3  pence 
per minute. A call set-up fee of up to 6 pence may apply)
– IE  01450 2655
Environmentally friendly waste disposal 

All packaging must be disposed of in accordance with  environmental guidelines.
This appliance is certified in accordance with Europe an Directive 2002/96/CE on the 
waste electrical and electronic equipment (WEEE). 
This directive provides the framework for the EU-wid e collection and reuse of used 
appliances.
Intended use
ContentsPage 
‹Intended use  ...................................... ................................................. 1
‹Programmes ......................................... ............................................... 1‹Setting and adjusting the programme  ............... ............................ 3
‹Washing ........................................................................................... 3/4
‹After washing ..................................... ................................................. 4‹Individual settings  ............................... ........................................... 5/6
‹Important information  ............................. .......................................... 6
‹Overview of programmes  ............................ .................................... 7‹Safety instructions  ............................................................................. 8
‹Consumption values  ................................ ......................................... 8
‹Care and cleaning  ............................................................................. 9‹Information on the display panel  .................. .................................. 9
‹Maintenance  .................................................................................... 10
‹What to do if ...  ................................................................................ 11

Protection of the environment/Conservation tips– Always fill the washing machine with a maximum amo unt of 
laundry for the relevant programme.
– Wash normally soiled laundry without a pre-wash. 
– Instead of  Cottons L
F 90 °C
, choose the programme 
Cottons LF 60 °C with the additional function  EcoPerfect j.
Comparable cleaning result was significantly lower  energy 
consumption.
– Measure the detergent according to the manufacturer s 
instructions and water hardness.
– If the laundry is then dried in the tumble dryer,  select spin speed 
according to instructions of dryer manufacturer.
Preparationa
Display panel /  
option buttonsProgramme selector
ProgrammesDetailed overview of programmes  apage 7 .
Temperature and spin speed can be selected individu ally, 
irrespective of the selected programme and programm e 
progress.
Cottons  LFhard-wearing fabrics
+ Prewash  7hard-wearing fabrics, prewash
Easy-Care Isynthetic fabrics
+ Prewash 7synthetic fabrics, prewash
Mix LIFDifferent types of laundry
Delicate/Silk  “Delicate washable fabrics
ÿWool /Hand/machine washable wool
2Rinse / 
Spin  	Laundry washed by hand,  2(Extra rinse) button 
activated; if only using the spin cycle, deactivate t he 
button
>EmptyDrain rinsing water with  c(without final spin)
| Butter/Oil
† Red WineHard-wearing and easy-care fabrics, special stain  
programme apage 5
… Tomatoes
Super Quick 15’  6Short programme
Shirt/Blouses ’No-iron shirts
Dark Wash Hard-wearing fabrics
(
a
a
$
>$
a
Compartment ~: Fabric softener, bleach
Compartment I : Detergent for prewash
‹for domestic use only,
‹for washing machine-washable fabrics and  
hand-washable wool in detergent solution, 
‹to be operated with cold or cold and hot (max. 60 º C) 
drinking water, depending on model, and commerciall y 
available detergents and care products which are su it-
able for use in washing machines.
.
– Do not leave children unattended near the 
washing machine.
– The washing machine is not to be used by  children or persons not familiar with the  
operating instructions.
– Keep pets away from the washing machine.
‘
‘V
‘
$
‘	
‘a
i a
j
S 2
‘($
(
‘„§‚o , $
„
§‚,
ǯ„§‚,
„
§‚,
Ç
¯
$
‘
‘$
‘$
z
‘
i
LF $
$ $
~
a
7
j j

Additional 
functions
~
12
Insert for liquid detergent (depending on model)  apage 6
            
						

							34
7V
7 = cold)

 c	 Select the spin speed (* depending on the model) or
  c(without final spin, 
laundry soaks in the last rinsing water, display panel - - -  )
Status displays Programme sequence displays: 1 üü2 üü	c ü¯
 Wash, rinse, spin, programme duration or end (-0-)
( a
, Open the washing machine door, reload laundry 
apages 4, 5
End of programme when ...
... Start/Reload  $flashes and  -¯-  appears on the display panel.
Note : If display panel lighting is switched off, press a ny button a Energy 
saving mode,  page 5.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select 2cRinse /  	Spin.
– Press  Start/Reload  $
.
Programmes at lower temperatures: 
– Select 
2c Rinse  / 	Spin  (deactivate2(Extra rinse)  button) or 
>Empty.
– Press  Start/Reload  $
.
Changing the programme if ...
... you have selected the wrong programme by mistake: 
– Reselect the programme. 
– Press  Start/Reload  $. The new programme starts from the beginning.
Reloading laundry if ... a page 5
... Press Start/ Reload$;both  the symbols „§‚+,  are displayed on 
the display panel. If  ǯ is lit, the washing machine door cannot be opened.
Press  Start/ Reload  $.
Sorting and loading laundry
Follow the manufacturers care information!
Sort laundry according to the labels indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load  a
Page 7 .
Observe important information! aPage 6
Wash laundry of different sizes in the same wash progr amme.
Close the door. Take care not to trap items of laundry b etween the washing machine door and
seal.
 Add detergent and care products
Measure detergent according:
amount of laundry, soiling, water hardness (ask your wa ter supply company) and
manufacturers instructions.
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and  place in the drum.

‹
‹‹
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹
LFLFj
Before the first wash,
run a wash cycle with no laundry in the machine  aPage 9.
Setting** and adjusting programmes
Programme selectorStart /
Reload
Programme selector for  
switching the machine on  
and off and for selecting the  
programme. Can be turned  
in either direction.
a
L
F
7
I
7
LIF
“
ÿ/
2	2
>c
|
†a
…
6
’

**If the  ( symbol flashes in the 
display panel, the childproof lock is  
active  a
Deactivate childproof lock,
page 5 .
For stain programmes, additional  
functions and option buttons  a Individual settings,  page 5.
Press  Start/Reload   $
Washing
1
2
Removing the washing
Open the washing machine door and remove the washin g.
If    (without final spin) is active: turn the programme  selector to 
>Empty or select the spin speed. 
Choose  Start/Reload  $
.
– Remove any foreign objects. Risk of rusting. 
– Leave the washing machine door and detergent door ope n 
so that any residual water can evaporate. 
Turn the tap off
Not required for Aqua-Stop models  aRefer to Installation instructions .
Switching off
Turn the programme selector to  Off.
Washing
~
‹
‹
‹
Dilute viscous fabric softener and fabric condition er with water. 
This prevents blockages.
‘
‘V
‘
$
‘	
‘a
i a
j
S 2
‘($
(
‘„§‚o , $
„
§‚,
ǯ„§‚,
„
§‚,
Ç
¯
$
‘
‘$
‘$
z
‘
i
LF $
$ $
~
a
7
j j
All buttons are sensitive and need  
only to be touched lightly. Press and  
hold the 
(Ready in) option button 
for an automatic run through all 
setting options.
3
Detergent drawer with  
compartments  I, II, ~
Door
Drum
Control panel
Service door
34
a
            
						

							56
7V
7

 c	 
c
1 üü2 üü	c ü¯

( a
, a
$
¯
a Energy 
2c 	
$
2c 	2
>$
$ . The new programme starts from the beginning.
a
$ „
§‚, are displayed on 
ǯ is lit, the washing machine door cannot be opened.
$
a
a

‹
‹‹
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹
LFLFj
a
a
L
F
7
I
7
LIF
“
ÿ/
2	2
>c
|
†a
…
6
’

(
a
a
$
>$
a
~
‹
‹
‹
Individual settings
‘Option buttons
You can change the spin speed and the temperature b efore the selected programme starts and while it is running. The 
effects depend on the programme progress.
‘V (Temperature  °C)
You can change the displayed washing temperature. T he maximum selectable temperature depends on the cu rrent 
programme.
‘ (Ready in)
When you select the programme, the relevant programme dur ation is displayed. You can delay the end of the 
programme before it begins. The ready in-time can be  set in increments of one hour up to a maximum of 24 hours. Press 
the  
 (Ready in)  button until the required number of hours is displ ayed (h = hour). Choose Start/Reload  $
.
‘	 (spin speed in rpm/   (without final spin))
You can change the displayed spin speed. The maximu m selectable spin speed depends on the model and wh ich 
programme is currently selected. 
‘Additional functions a and overview of programmes , page 7
SpeedPerfect  iFor washing in a shorter time with a washing outcom e comparable to that of the standard 
programme. Maximum load  aOverview of programmes,  page 7.
EcoPerfect j For saving energy with a washing performance compar able to that of the standard programme.
S (Reduced Ironing) Special spin sequence with subsequ ent fluffing. Gentle final spin: residual moisture in the laundry 
slightly increased.
2
(Extra rinse) Additional rinse cycle. For areas with  very soft water or for further enhancing the spin result.
‘Childproof lock
(in the display panel You can lock the washing machine to prevent the fun
ctions you have set from being changed 
inadvertently.  ON/OFF: after the start/end of the programme, press the St art/Reload $button 
for five seconds. 
Note : the childproof lock can remain activated until yo u wish to start the next programme, even 
after switching off the machine. 
Then you can deactivate the childproof lock before  the start of the programme and activate it again 
as necessary once the programme has started.
If you wish to turn off the childproof lock during  a programme, turn the programme selector to the 
position in which the machine is locked (the symbol  ( remains lit). Turning it off in any other 
position will cancel the programme in progress.
‘Reloading
„§‚+ o,
in the display panel Press Start/
Reload$if you want to add additional items of laundry after the p rogramme has 
started. The machine checks whether reloading is possib le.
„
§‚+ ,  lit: reloading is possible.
ǯ flashes: wait until  „§‚+,  lights.
Note : do not open the door until  both the „
§‚+,  symbols are lit.
Ç
¯: it is not possible to reload.
Note : for safety reasons, the washing machine door rema ins locked when the water level and/
or temperature is high, or during spinning. 
To continue the programme, press the  Start/Reload  $
button.
‘Stain programmes
Do not let stains dry. Remove any solid residue bef orehand. Sort items of laundry as usual and load th e washing machine. 
The washing machine adjusts the washing temperature , drum movement and soaking times to suit the type of stain. Hot 
or cold water, gentle or intensive washing control  (thanks to the new drum structure) and a long or sh ort soaking time 
ensure that the wash programme has a special sequen ce for each type of stain. 
The result: optimum stain treatment without the use  of additional special detergents.
‘Energy saving mode
The display panel lighting goes out after a few minutes, Start/Reload $flashes. Press any button to switch on the 
lighting.
‘Start/Reload$
To start the programme or to subsequently load addi tional laundry, and to activate/deactivate the childproof lock.
Individual settings  z
‘Signal
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders,  additives and cleaning agents, you must follow the 
manufacturers instructions..
– Empty all pockets 
– Check for metal items (paper-clips, etc.). 
– Wash delicates in a laundry bag (tights, curtains, unde rwired bras).
– Fasten zips, do up any buttons. 
– Brush sand out of pockets and collars. 
– Remove curtain fittings or place in the laundry bag.
 Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additi onal function SpeedPerfect .i
Pre-treat any stains as necessary. 
intense wash Load less laundry. Choose a programme wi th a prewash.
Soaking       Load laundry of the same colour.
Pour soaking agent/detergent into compartment  II in accordance with the manufacturers instructions.  Turn the 
programme selector to  Cottons L
F
30 °C  and press  Start/Reload  $. After approx. 10 minutes, press 
Start/ Reload $to pause the programme. Once the required soaking time  has elapsed, press Start/Reload $again 
to continue the programme, or select a different programm e.
Starch      Laundry should not be treated with fabric softener.  
Starching is possible in all wash programmes if liquid s tarch is used. Pour the starch in accordance with the 
manufacturers instructions into fabric softener compa rtment ~ (rinse first if necessary).
Dyeing / Bleaching
Dye should only be used in normal household quantitie s. Salt may damage stainless steel. Always follow the d ye 
manufacturers instructions. Do  not use the washing machine for bleaching clothes.
Insert for liquid detergent    depending on model
Position the insert for dispensing liquid detergent :
– Remove the detergent drawer completely  apage 9
– Slide the insert forwards and click into place. 
Do not use the insert (slide upwards): for gel dete rgents and washing powder, 
for programmes with  + Prewash7
 and End time option.
Set to •1 step, the  
display panel  
lights up press and  
hold+1 step, release
set to 
•setting the  
volume*
setting the 
volume* 1 step
* if necessary, select the  
function several times
1.
Activating the mode  
for setting the signal  
volume
2.Setting the volume  
for...
direct
Button signals Information signals
j
j

~
56
a
            
						

							7
Overview of programmes 
aRefer to the table of consumption values on page 8, a nd advice and warnings on page 6.
Programmes °C max. Type of laundry
Additional functions; InformationCottons L
F
7 - 90 °C 7 kg/ 
4 kg*hard-wearing fabrics, cottons or linen that can be 
washed 
at 90°C SpeedPerfect 
i*, EcoPerfect j,S (Reduced Ironing), 
2
(Extra rinse) 
+ Prewash 7Easy-Care I
7 - 60 °C
3.5 kgeasy-care cotton, linen, synthetic or blended fabri
cs
SpeedPerfect  i, EcoPerfect j,S (Reduced Ironing), 
2
(Extra rinse)
+ Prewash 7Mix L
IF
7 - 40 °C cotton or synthetic fabrics SpeedPerfect
i, EcoPerfect  j,S (Reduced Ironing), 
2
(Extra rinse);
different types of laundry can be washed together
Dark Wash 
7  - 40 °C dark cotton and dark synthetic fabrics SpeedPerfect
i, EcoPerfect  j,S (Reduced Ironing), 
2
(Extra rinse);
reduced rinse and final spin cycle
| Butter/Oil
7  - 60 °C hard-wearing and easy-care fabrics
S(Reduced Ironing) ;optimum stain treatment apage 5
† Red Wine… TomatoesShirt/Blouses 
’
7 - 60 °C
2 kgnon-iron shirts made of cotton, linen, synthetic fi
bres or 
blended fabrics SpeedPerfect
i, EcoPerfect j,S (Reduced Ironing), 
2
(Extra rinse) ;
S (Reduced Ironing) : spin only, hang up dripping wet
Delicate/Silk 
“
7 - 40 °C for delicate fabrics, e.g., silk, satin, synthetic 
fibres or 
blended fabrics (e.g. curtains) SpeedPerfect
i, EcoPerfect j,S (Reduced Ironing), 
2
(Extra rinse): 
no spin between rinse cycles
ÿ Wool  /
7 - 40 °C hand/machine washable wool particularly delicate wash programme to avoid shrin
kage of laundry; 
longer programme breaks (fabrics rest in the deterg ent solution)
Super Quick 15’ 6
7 - 40 °C synthetic cotton, linen, synthetic fibres or blende
d fabricsShort programme of approx. 15 minutes,  
suitable for lightly soiled laundry
Additional programmes
2
Rinse/Spin  	
,>
Empty
* reduced load with additional function  SpeedPerfecti.
‘
As  a short programme Mix  L
IF 40 °Cwith a maximum spin speed, is ideal.
For programmes without prewash, add detergent to co mpartment II. For prewash programmes, distribute the detergent  between compartments Iand  II.
9009 / 9000561979
9000561979
WAQ24440BY /...
Robert Bosch Hausgeräte GmbH
CarläWery Str. 34
81739 Munich / Germany
8
Safety instructions
– Carefully read the instruction manual and the informati on enclosed, and act accordingly.
– Keep the machines documentation for future referen ce.
Risk of electric shock!– Never pull the cable to disconnect the mains plug! 
– Never insert/disconnect the mains plug with damp han ds.
Danger to life!For worn-out appliances: 
– Disconnect the mains plug. 
– Sever the mains cable and discard along with the plug .
– Destroy the lock on the washing machine door. This  will prevent children from 
locking themselves in and risking their lives.
Danger of suffocation! – Keep packaging, film and packaging parts out of the re ach of children.
Risk of poisoning!– Keep detergents and care products out of the reach  of children.
Risk of explosion!– Items of laundry pretreated with cleaning agents con taining solvents, e.g. stain 
remover/cleaning solvent may lead to an explosion a fter being loaded into the 
washing machine. 
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury! – The washing machine door may become very hot. 
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine. 
– Do not lean on the open washing machine door. 
– Do not reach into the drum if it is still rotating.
– Be careful when opening the detergent drawer while  the machine is in operation.
 Consumption values    depending on model
Programme Additional function Load Electricity***Water***Programme
duration***
Cottons 

LF 7](cold)
7 kg 0.24 kWh 60 l 145 min 
Cottons

LF 30 °C**
7 kg 0.37 kWh 59 l 145 min 
Cottons

LF 40 °C**
7 kg 0.98 kWh 59 l 155 min
Cottons

LF 60 °C**
7 kg 1.15 kWh 59 l 165 min
Cottons

LF 90 °C
7 kg 2.10 kWh 69 l 155 min
Cottons

LF 60 °C 
EcoPerfect j* 7 kg 1.05 kWh 42 l 180 min
Easy-Care  I 40 °C**
3.5 kg 0.62 kWh 53 l 87 min
Mix LIF  40 °C**
3.5 kg 0.54 kWh 47 l 60 min
Delicate/Silk “ 30 °C
2 kg 0.19 kWh 34 l 41 min
Delicate/Silk “7](cold)
2 kg 0.05 kWh 35 l 41 min
Wool  / 30 °C 2 kg 0.17 kWh 39 l 40 min
Wool  /7] (cold) 2 kg 0.03 kWh 39 l 40 min
* Programme setting for testing and energy labelling  in accordance with EU directive 92/75/EEC.
** Programme setting for testing in accordance with  valid standard EN60456.
Note on comparative tests: For testing the test pro grammes, wash the specified load using the maximum  spin speed.
As a  short programme  for coloureds, select the programme  Mix L
IF40 °C  with the maximum spin speed.
*** The values deviate from the indicated values dep ending on water pressure, hardness, and inlet temperature, ambient temperature, 
type, amount and soiling of the laundry, detergent  used, fluctuations in the power supply and selected  additional functions.
I$
a
a
,
§³Å§›Éa
§
³µa a
§
›´
©³¯
a
>
2	>
$
‘
‘$
a
‘a
 a
a
‘$
a
‘ a
a
‘
‘
S a
a
‘
‘
‘a
‘LF
‘1
‘a
a
‘a
‘
‘c 	
a
                      
						

							a
LF
7i j S
2
7I
7
i j S
2
7
LIF
7i j S
2


7 i j S
2
|
7
Sa
†…
’
7 i j S
2
S
“
7
i j S
2
ÿ
/
7
67 2
	
>
i
‘
LIF
ä


 LF 7]


 LF


 LF


 LF


 LF


 LF
j
I
LIF “ “7]
// 7]
L
IF
9
Care and cleaning 
Before the first wash
Do not put laundry in the machine! Turn on the tap. Put into compartment II:
– approx. 2 litres of water 
– detergent (measure according to the manufacturers  instructions for lightly soiled laundry and water hardness)
Turn the programme selector to  Easy-Care I
60 °C and press  Start/Reload  $. At the end of the programme, turn the 
programme selector to  Off.
Machine housing, control panel
– Wipe with a soft, damp cloth. 
– Do not use any abrasive cloths, scourers or cleani ng agents (stainless steel cleaners). 
– Remove detergent and cleaning agent residue. 
– Do not wash the machine with a jet of water!
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener res idues.
1. Pull out, press insert down and remove drawer comple tely.
2. To remove the insert: press upwards from below with  your finger.
3. For models with insert for liquid detergent:Slide t he insert upwards and remove it from the back.
4. Clean the detergent dispenser tray and inserts with  water and a brush and dry them.
5. Attach the insert and engage (connect the cylinder  to the guide pin).
6. Push in the detergent drawer.
Leave the detergent drawer open so that any residua l water can evaporate.
Drum
Leave the washing machine door open so that the dru m can dry out.For rust stains, use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine!
This will not be necessary if the correct dosage of detergent is used. If it is, descale the appliance according to the 
manufacturers instructions. Descaling products can  be acquired on the website or from customer services a Installation 
instructions .
Emergency release (e.g. in the event of a power cut)
The programme continues to run when the power has b een restored. However, if the laundry has to be removed, the 
washing machine door can be opened as follows: 
Risk of scalding! 
The detergent solution and laundry may be hot. Let  it cool.
Do not reach into the drum if it is still rotating. 
Do not open the washing machine door if water can b e seen through the glass.
1. Turn the programme selector to  Off and disconnect the mains plug.
2. Drain the detergent solution  apage 10 .
3. Pull the emergency release downwards with a tool an d release.
The washing machine door can then be opened.
Information on the display panel depending on model
,flashesClose the washing machine door properly; laundry ma
y be caught.
§:³Å,
§: ›ÉTurn on the tap fully, supply hose kinked or trappe d;
Clean the filter  apage 10 , water pressure too low.
§:³µDetergent solution pump blocked; Clean the detergen t solution pump apage 10 .
Drainage hose / waste pipe blocked; Clean the drain age hose at the siphon apage 10 .
§:›´Water in the base tub, appliance leaking. Call cust omer services!
©:³¯Not a fault. Entry of unused hot water. Check hot w ater tap.
Childproof lock activated: to deactivate apage 5 .
–Risk of electric shock!  Disconnect the mains plug.
– Risk of explosion! Do not use solvents.
910
Maintenance
Detergent solution pump
Turn the programme selector to  Off and disconnect the mains plug.
1. Using a screwdriver or the insert for liquid deterg ent 
(depending on model), open and remove the service f lap.
2. Remove the folding gutter and place a large enough c ontainer underneath.
3. For models with a drainage hose:  Remove the drainage hose from the retainer and pul l it 
from the housing. 
Remove the sealing cap, allow the detergent solution to  flow out into the container. Replace 
the sealing cap and place the drainage hose in the  retainer.
3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the 
detergent solution begins to flow out on the folding  gutter. When the container is full, close 
the pump cover and empty the container. Repeat the ab ove steps until all the detergent 
solution has completely drained out.
4. Carefully unscrew the pump cover (there may be residu al water).
5. Clean the interior, pump cover thread and pump hous ing (the impeller in the detergent 
solution pump must rotate).
6. Replace the pump cover and screw it tightly.
7. Return the drainage hose (depending on model) and t he folding gutter to their start position.
8. Place the service flap back on and close.
To prevent unused detergent from flowing straight int o the drain during the next wash: 
Pour 2 litres of water into compartment  II and then start the > Empty programme.
Drainage hose at the siphon
Turn the programme selector to  Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage  hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connectio n with the hose clamp.
Filter in the water supply
Risk of electric shock! 
Do not immerse the Aqua-Stop safety device in water (con tains an electric valve).
Reduce the water pressure in the supply hose: 
1. Turn off the tap.
2. Select any programme (except  2
Rinse/Spin  	 / > Empty ).
3. Choose  Start/Reload  $. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to  Off. Disconnect the mains plug. 
Clean the filter:
5. Disconnect the hose from the tap. 
Clean the filter using a small brush.  
and/or  for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance. 
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
–Risk of burning!
Allow the detergent solution to cool.
– Turn off the tap.
‘
‘$
a
‘a
 a
a
‘$
a
‘ a
a
‘
‘
S a
a
‘
‘
‘a
‘LF
‘1
‘a
a
‘a
‘
‘c 	
a
                      
						

							a
LF
7i j S
2
7I
7
i j S
2
7
LIF
7i j S
2


7 i j S
2
|
7
Sa
†…
’
7 i j S
2
S
“
7
i j S
2
ÿ
/
7
67 2
	
>
i
‘
LIF
ä


 LF 7]


 LF


 LF


 LF


 LF


 LF
j
I
LIF “ “7]
// 7]
L
IF
I$
a
a
,
§³Å§›Éa
§
³µa a
§
›´
©³¯
a
>
2	>
$
11
What to do if...
‘Water is leaking out – Attach/replace the drainage hos e correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not dispensed. –
Start/Reload $not selected?
– Tap not turned on? 
– Filter blocked? Clean the filter apage 10 .
– Supply hose kinked or trapped?
‘The appliance door will not  
open. – Safety function active. Programme stopped? 
apage 4 .
–   (without final spin) selected?  apage 3, 4 .
– Can be opened by emergency release only?  apage 9 .
– Door locked after the washing machine is switched of f: Switch on the washing 
machine and wait for 5 seconds.
‘The selected programme does  
not start. –
Start/Reload $or  (Ready in)  time selected?
– Washing machine door closed? 
– Childproof lock active? Deactivate  apage 5 .
‘Detergent solution is not  
drained. –
  (without final spin) selected?  apage 3, 4 .
– Clean the detergent solution pump  apage 10 .
– Clean the waste pipe and/or drainage hose.
‘No water can be seen in the  
drum. – Not a fault. Water remains inside below the visible a
rea.
‘Spin result not satisfactory. 
Laundry wet/too damp.– Not a fault. Spin control system has stopped the spin
 cycle. Uneven distribution of 
laundry. 
Distribute large and small items of laundry evenly in  the drum.
– S (Reduced Ironing)  selected? apage 5 .
– Selected speed too low?  apage 5 .
‘Programme duration changes  
suddenly during operation. – Not a fault. The program time can vary according to t
he distribution of laundry, with 
it therefore being possible for the display panel to sho w adjustments in the 
duration.
‘Spin cycle performed several  
times. – Not a fault. The balance control system has detected 
an imbalance and is 
attempting to redress this by repeating the spin.
‘Residual water in the  
compartment for care products. – Not a fault: the action of the care product is not af
fected.
– Clean the compartment if necessary  apage 9 .
‘Odour formation in the washing  
machine. – Run programme 
Cottons LF90 °C  without laundry. Use standard detergent.
‘Status display  1 flashing.
Appliance has detected a  
detergent overload. – Too much detergent used?
If foam is escaping from the detergent drawer: mix  1 tablespoon of fabric softener 
with ½ litre of water and pour into compartment  II(not with outdoor or down 
fabrics) .
– Reduce the detergent dosage for the next wash cycl e.
‘Intense noise formation,  
vibrations and wandering  
during the spin cycle.– Are the appliance feet fixed?
Secure the appliance feet aInstallation instructions .
– Transportation safety devices removed? Remove transportation safety devices aInstallation instructions .
‘Display panel/indicator lamps  
remain turned off while the  
machine is working. – Energy-saving mode 
apage 5 .
– Power cut?
– Fuses triggered? Reset/change the fuse. 
– If the fault occurs repeatedly, call customer service s.
‘Programme sequence longer  
than usual.– Not a fault. Unbalanced load detection system adjusts imbala
nce by repeatedly 
distributing the laundry.
– Not a fault: foam detection system active; adds an additio nal rinse cycle.
‘Detergent residues on the  
laundry.– Occasionally, phosphate-free detergents contain wate
r-insoluble residues.
– Select cRinse /Spin  	 or brush out the laundry after washing.
If you cannot correct a fault yourself or if a repai r is necessary:
– Turn the programme selector to  Off and remove the mains plug from the socket.
– Turn off the water supply and call customer service sa Installation instructions.
Instructions for use
Washing Machine
en
Observe the safety instructions on page 8!
Read these instructions and the separate installation instructions before 
operating the washing machine.