Bosch WAE 24163 User Manual

							123456
Programme has ended when...
... $ (Start /Pause) flashes and the   (finished)  indicator 
light comes on.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  2Rinse /	c Spin.
– Select $(Start /Pause).
Programmes at lower temperatures:– 2 Rinse /	c Spin  (deactivate  2 (Rinse plus)  button) or 
select  >Drain .
– Select $(Start /Pause).
Changing the programme, if ...
... you have selected the wrong programme by mistake :
– Reselect the programme. 
– Select $(Start /Pause). The new programme starts 
from the beginning.
Correct installation according to the  
separate Installation instructions. 
Check the machine 
– Never use a damaged machine. 
– Inform the after-sales services. 
Connect the mains plug
Make sure your hands are dry.  
Take hold of the plug only.
Turn the tap on
Compartment II : detergent for the main wash, water
softener, bleach, stain remover
Sorting and loading laundry
Follow the manufacturers care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load  apage 7 .
Observe the important information  a page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap  items of laundry
between the washing machine door and the rubber seal .
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask your  water supply
company) and manufacturers instructions.
Pour liquid detergent into the appropriate dispense r and place in the drum.
Your washing machine
Congratulations ä you have opted for a modern, high-quality 
domestic appliance manufactured by Bosch. This wash ing machine 
is distinguished by its economical water and energy  consumption.
Each machine that leaves our factory has been inspe cted thoroughly 
to ensure that it functions properly and is in perfect  condition.
Further information: www.bosch-home.com 
You can find the contact details for your nearest a fter-sales service 
here or in the after-sales service directory (depen ding on model).
GB  0844 8928979
      Calls from a BT landline will be charged at up  to 3 pence per
      minute. A call set-up fee of up to 6 pence ma y apply.
IE 01450 2655
Environmentally friendly waste disposal                                               

All packaging must be disposed of in accordance with  
environmental guidelines. 
This appliance is certified in accordance with Europ ean Directive 
2002/96/EEC on waste electrical and electronic equi pment 
(WEEE). 
This directive provides the framework for the EU-wide  collection and 
reuse of used appliances.
Intended use
ContentsPage 
‹Intended use  ...................................... ................................................. 1
‹Programmes  ........................................ ............................................... 1‹Setting and adjusting the programme  ............... ............................ 3
‹Washing ........................................................................................... 3/4
‹After washing ..................................... ................................................. 4‹Individual settings  ............................... ........................................... 5/6
‹Important information  ............................. .......................................... 6
‹Overview of programmes  ............................. ................................... 7‹Safety instructions  ............................................................................. 8
‹Consumption values  ................................ ......................................... 8
‹Care  ..................................................................................................... 9‹Information on the indicator lights ............... ................................... 9
‹Maintenance  .................................................................................... 10
‹What to do if... .................................................................................. 11
Protection of the environment/Conservation tips– Always fill the washing machine with a maximum amoun t of 
laundry for the relevant programme.
– Wash normally soiled laundry without a prewash. 
– Instead of  MCottons 90 °C , choose the programme
M Cottons 60 °C  with the additional function  jEcoPerfect .
Comparable cleaning result with significantly lower  energy 
consumption.
– Measure the detergent according to the manufacture rs 
instructions and water hardness.
– If the laundry is then dried in the tumble dryer,  select the spin 
speed according to the instructions of the dryer ma nufacturer.
Preparation Before washing for the first time
Wash once without any laundry  a page 9.
Setting and adjusting a programme
Spin
speed*Programme selectorStart/
Pause
Programme selector for  
switching the machine on  
and off and for selecting  
the programme. Can be  
turned in either direction.
Programmes
Detailed overview of programmes  apage 7 .
The spin speed can be selected individually, irresp ective of 
the selected programme and programme progress.
M CottonsHard-wearing fabrics
PrewashHard-wearing fabrics, prewash at 30 °C
N MixDifferent types of laundry
@SuperQuick  15’Short programme
2Rinse /	 SpinLaundry washed by hand, 2  (Rinse plus)  button activated; if only 
using the spin cycle, deactivate the but- 
ton
> DrainDrain rinsing water for   (without final 
spin)
ÿü /O  WoolHand/machine-washable wool
Q Delicates/SilkDelicate washable fabrics
IEasy-CareEasy-care fabrics
Additional functions and spin  
speeds  a Individual settings, 
page 5 .
Select $(Start/Pause)
Washing
1
2 Washing
Detergent drawer with 
compartments 
I, II, ~
Washing machine  
door
Compartment  ~: fabric softener, starch
Compartment I : detergent for prewash
‹For domestic use only
‹For washing machine-washable fabrics and hand-wash- 
able wool in detergent solution
‹To be operated with cold drinking water and commer- 
cially available detergents and care products which  are 
suitable for use in washing machines
.
– Do not leave children unattended near the  washing machine
– The washing machine is not to be used by  children or persons not familiar with the  
operating instructions
– Keep pets away from the washing machine
Read these instructions and the separate  
installation instructions before operating the  
washing machine.
Dilute viscous fabric softener and fabric condition er with water.
This prevents blockages.
Individual settings
‘Spin speed / without final spina model-dependent
Before and while the selected programme is running,  the spin speed or  (without final rinse, 
laundry soaks in the last rinsing water) can be set.  The effects depend on the programme 
progress. 
The maximum selectable spin speed depends on the mo del and on which programme is 
currently selected.
‘Additional functions a and overview of programmes, see  page 7
i SpeedPerfect For washing in a shorter time with a washing outcom e comparable to 
that of the standard programme. Maximum load  a Overview of 
programmes,  page 7.
j EcoPerfect For saving energy with a washing performance compar able to that of 
the standard programme.
S (Easy-iron) Special spin sequence with subsequent fluffing. Mor e gentle final spin 
- residual moisture in the laundry slightly increas ed.
2 (Rinse plus) Additional rinse cycle. For areas with very soft wat er or for further 
enhancing the spin result.
‘$Start/Pause
For starting or interrupting the programme.
‘Signal
2. Setting the  
volume for ...
1.
Activate the  
setting mode for  
signal volume
Set to • 1 step Press and 
hold+
Release
Button signals Information signals Set to •
Setting the  
volume**
Setting the 
volume**
1 step direct
** you may need to select the function several time
s.
1200 
1000
800
600

1 step
Visually  
impaired mode* 
ON-OFF Optional:
ON-OFF Set to •
*Short signal - function on. 
Long signal - function off.
1 step 1200 
1000
800
600

1200
1000
800
600

1200
1000
800
600

     Important information           
Protecting the laundry and the machine
– When determining the dosage of all washing powders
, additives and cleaning agents, you 
must follow the manufacturers instructions.
– Empty pockets. 
– Look out for metal items (paperclips, etc.). 
– Wash delicates in a laundry bag (tights, curtains,  underwired bras).
– Fasten zips, do up any buttons. 
– Brush sand out of pockets and collars. 
– Remove curtain fittings or place in the laundry ba g.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additi onal function 
i SpeedPerfect .
Pretreat any stains as necessary.
intense Do not load as much laundry.  Choose a programme with prewash.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment  II in accordance with the manufacturers 
instructions. Turn the programme selector to  MCottons  30 °C  and select $(Start /Pause). 
After approx. 10 minutes, press  $(Start/ Pause ), to pause the programme. Once the 
required soaking time has elapsed, press  $(Start /Pause), again to continue the 
programme, or select a different programme.
Starching               Laundry must not be treated with fabric softener 
Starching is possible in all wash programmes if liq uid starch is used. Pour starch into the 
fabric softener compartment in accordance with the  manufacturers instructions~ (rinse first 
if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantit ies. Salt may damage stainless steel. 
Always follow the dye manufacturers instructions.  Do not use the washing machine for 
bleaching clothes.
All buttons are  
sensitive and need  
only to be touched  
lightly. If you press  
and hold the spin  
speed button, the  
appliance  
automatically cycles  
through the setting  
options.
Additional 
functions
3
Drum
Control panel
Service flap
Status
indicator
Removing the washing
Open the washing machine door and remove the washin g.
If    (without final spin) is active: Turn the programme  
selector to  >Drain  or select the spin speed. 
Select $(Start /Pause).
– Remove any foreign objects -
risk of rusting.
– Leave the washing machine door and detergent  drawer open so that any residual water can  
evaporate. 
Turning the tap off
Not required for Aqua-Stop models  a refer to installation 
instructions
Switching off
Turn the programme selector to  Off.
(*model-dependent)
1 2 	 wash 
rinse 
spin 
finished
       
						

							7
Overview of programmes 
a refer to the table of consumption values on page 8  and notes on page 6.
Programmes °C max.Type of laundry
Additional functions; informationMCottons
30, 40, 60, 90 °C
7 kg/ 
4 kg*Hard-wearing fabrics, heat-resistant fabrics made of  
cotton or linen
i
 SpeedPerfect*,  j EcoPerfect,  S(Easy-iron),  2 (Rinse plus)
Prewash
40 °C
I Easy-Care
30, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic  
fibres or blended fabrics
i
SpeedPerfect,  jEcoPerfect,  S (Easy-iron),  2 (Rinse plus)
N  Mix
40 °C Fabrics made of cotton or easy-care fabrics i
SpeedPerfect,  jEcoPerfect,  S (Easy-iron),  2 (Rinse plus);
different types of laundry can be washed together
Q  Delicates/Silk
30 °C
2 kgFor delicate, washable fabrics, e.g. made of silk,  
satin, synthetic fibres or blended fabrics (e.g. cur- 
tains)
i
SpeedPerfect,  jEcoPerfect,  S (Easy-iron),  2 (Rinse plus);
No spin between rinse cycles
ÿü /O Wool
cold, 30 °C Hand
ä or machine-washable fabrics made of wool or 
containing wool Particularly gentle wash programme to prevent shrinkage
 of 
laundry. Longer programme breaks (fabrics rest in the  detergent 
solution)
@  SuperQuick 15’
30 °C Easy-care fabrics made of cotton, linen, synthetic  
fibres or blended fabrics Short programme, approx. 15 minutes, 
suitable for lightly soiled laundry
Additional  
programmes
2
Rinse/ 	cSpin,  > Drain
* Reduced load for additional  iSpeedPerfect  function
‘
As a  short programme ,N
Mix 40 °C
,with a maximum spin speed, is ideal.
Programmes without prewash - add detergent to compa rtment II, programmes with prewash - distribute the detergent  between compartments Iand  II.
0411 / 9000658155 
*658155*
WAE24163SN ...
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
8
Safety instructions
– Read the instruction manual and installation instr uctions and all other information enclosed 
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug. 
– Never insert/disconnect the mains plug with damp ha nds.
Danger to lifeFor worn-out appliances: 
– Disconnect the mains plug.
– Sever the mains cable and discard along with the p lug.
– Destroy the lock on the washing machine door. This  will prevent 
children from locking themselves in and risking the ir lives.
Danger of suffocation– Keep packaging, film and packaging parts out of th e reach of 
children.
Risk of poisoning – Keep detergents and care products out of the reach  of children.
Risk of explosion– Items of laundry pretreated with cleaning agents co ntaining 
solvents, e.g. stain remover/cleaning solvent may c ause an 
explosion after being loaded into the washing machi ne.
Rinse items of laundry thoroughly by hand beforehan d.
Risk of injury– The washing machine door can become very hot. 
– Be careful when draining hot detergent solution. 
– Do not climb onto the washing machine. 
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating .
– Be careful when opening the detergent drawer while t he machine 
is in operation.
 Consumption values    depending on model
Programme Load Electricity***Water***Programme
duration***
M Cottons 30 °C* 7 kg 0,55 kWh 60 l 02:36 h
MCottons 40 °C* 7 kg 0,69 kWh 60 l 02:36 h
MCottons 60 °C* 7 kg 1,33 kWh 60 l 02:41 h
M Cottons 90 °C 7 kg 2,00 kWh 64 l 02:48 h
 Easy-Care 40 °C* 3 kg 0,55 kWh 55 l 01:37 h
NcMix 40 °C 3 kg 0,48 kWh 32 l 01:03 h
Q cDelicates/Silk 30 °C 2 kg 0,21 kWh 31 l 00:41 h
ÿü //  Wool 30 °C 2 kg 0,19 kWh 39 l 00:40 h
* Programme setting for testing in accordance with vali d standard EN60456.
Note on comparative tests: For testing the test program mes, wash the specified load using the maximum spin speed.
Programme Additional function Load Annual energy 
consumption Annual water  
consumption
M
Cottons 40/60 °C  jEcoPerfect** 7/3,5 kg  197 kWh 10560 l
** Programme setting for testing and energy labelling in  accordance with EU directive 2010/30/EU with cold wate r (15 ºC).
*** The values deviate from the indicated values depe nding on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, d etergent used, fluctuations in the power supply and  selected additional 
functions.
9
Care              
Before washing for the first time
Do not load any laundry into the machine. Turn on t he tap. Add the following to compartment 
II :
– approx. 1 litre water  
– detergent (dosage according to the manufacturers  instructions for light soiling and the 
appropriate degree of water hardness)
Set the programme selector to  IEasy-Care 60 °C  and select $ (Start /Pause). At the end 
of the programme, turn the programme selector to  Off.
Machine housing, control panel
– Wipe with a soft, damp cloth. 
– Do not use any abrasive cloths, scourers or cleani ng agents (stainless steel cleaners). 
– Remove detergent and cleaning agent residue immedi ately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener res idues.
1. Pull out, press insert down, remove draw completely.
2. To remove the insert: press the insert upwards from  below with your 
finger.
3. Clean the detergent dispenser tray and insert with  water and a brush and 
dry it.
4. Attach the insert and engage (connect the cylinder  to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual  water can 
evaporate.
Drum
Leave the washing machine door open so that the dru m can dry out.
Rust stains - use chlorine-free cleaning agent, not  steel wool.
Descaling                      Ensure there is no laundry in the machine
Descale the appliance according to the descaler man ufacturers instructions. This should not 
be necessary if the correct dosage of detergent is  used.
Information on the indicator lights   model-dependent
A signal sounds and indicator lights for the spin speed flash:
¤
¤
¤
¤
¤
Close the washing  
machine door properly;  
laundry may be caught.¤
¤
¤
¤
¤
Detergent solution pump  
blocked; Clean the  
detergent solution pump a page 10.
Drainage hose/waste pipe  
blocked; Clean the drainage  
hose at the siphon  a  page 10 .¤
¤
¤
¤
¤
Open the tap completely,  
supply hose kinked or  
trapped; 
Clean the filter  a page 10 ,
Water pressure too low.
¤
¤
¤
¤
¤
Motor fault. Call the after- 
sales service.¤
¤
¤
¤
¤
Water in the base tub,  
appliance leaking. Call the  
after-sales service.
– Risk of electric shock.  Disconnect the 
mains plug.
– Risk of explosion.  No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to  Off and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose:  Remove the drainage hose from the retainer and pul l it 
from the housing. Remove the container. 
Remove the sealing cap, allow the detergent solution to  flow out.
Replace the sealing cap and place the drainage hose i n the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover until the 
detergent solution begins to flow out. When the ser vice flap is half full, close the pump cover 
and empty the service flap. Repeat the above steps unt il all the detergent solution has 
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housin g (the impeller in the detergent 
solution pump must rotate).
5. Replace the pump cover and screw it tightly in place.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight int o the drain during the next wash: pour 1 litre of water into 
compartment  II and start the  > Drain  programme.
Drainage hose at the siphon
Turn the programme selector to  Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainag e hose (residual water).
2. Clean the drainage hose and siphon connecting piece .
3. Reattach the drainage hose and secure the connection with  the hose clamp.
Filter in the water supply
Risk of electric shock. 
Do not immerse the HydroSafe safety device in water (it contains an electric valve).
Reduce the water pressure in the supply hose: 
1. Turn off the tap.
2. Select any programme (except for  2Rinse /	c Spin //  >Drain ).
3. Select $(Start /Pause). Let the programme run for approximately 40 sec onds.
4. Turn the programme selector to  Off. Disconnect the mains plug.  
Clean the filter:
1. Depending on model: 
Disconnect the hose from the tap.  
Clean the filter using a small brush. 
and/or  for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance.  
 Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
–Risk of scalding.
Allow the detergent solution to cool down.
– Turn off the tap.
11
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not  
dispensed. –
$ (Start /Pause) not selected?
– Tap not turned on? 
– Filter blocked? Clean the filter a page 10.
– Supply hose kinked or trapped?
‘Washing machine door  
cannot be opened. – Safety function active. Wait approx. 2 minutes.– Is  (without final spin) selected? a
 page 3, 4.
‘Programme does not  
start. –
$ (Start/ Pause) selected?
– Washing machine door closed?
‘Detergent solution is  
not drained.– Is  (without final spin) selected? a  page 3, 4.
– Clean the detergent solution pump  a page 10.
– Clean the waste pipe and/or drainage hose.
‘Water not visible in the  
drum. – Not a fault - water below the visible area.
‘Unsatisfactory spin  
result. 
Laundry wet/too damp.– Not a fault - the unbalanced-load detection system
 has cancelled 
the spin cycle because of uneven distribution of th e laundry.
Distribute small and large items of laundry evenly  inside the drum.
–
S (Easy-iron)  selected? a page 5.
– Too low a speed selected?  a page 5 .
‘Spin cycle performed  
several times. – Not a fault - unbalanced load detection system adj
usts the 
imbalance.
‘Residual water in the  
compartment for care  
products. – Not a fault - the action of the care product is no
t affected.
– Clean the insert if necessary  a page 9 .
‘Odour formation in the  
washing machine. – Run programme M
Cottons 90 °C  without laundry. Use 
standard detergent.
‘1  (wash)  display lamp 
flashes. Foam may be  
coming out of the  
detergent drawer. – Too much detergent used? Mix 1 tablespoon of fabri
c softener 
with ½ litre of water and pour into dispenser  II(not for outdoor 
and down-filled textiles!).
– Reduce the detergent dosage for the next wash cycl e.
‘Intense noise formation,  
vibrations and  
“walking” during the  
spin cycle.– Are the appliance feet fixed?
Secure the appliance feet a Installation instructions .
– Transportation safety devices removed? Remove the transportation safety devices  a Installation 
instructions .
‘Noises during spin and  
drain cycles. – Clean detergent-solution pump 
apage 10.
‘The indicator lights do  
not function during  
operation. – Power cut? 
– Fuses tripped? Reset/change the fuse. 
– If the fault occurs repeatedly, call the after-sal
es service.
‘Programme sequence  
longer than usual.– Not a fault - unbalanced load detection system adj
usts imbalance 
by repeatedly distributing the laundry.
– Not a fault - foam detection system active - adds  an additional 
rinse cycle.
‘Detergent residues on  
the laundry. – Occasionally, phosphate-free detergents contain wat
er-insoluble 
residues.
– Select 
2 Rinse/ 	 Spin or brush out the laundry after washing.
If you cannot correct a fault yourself (switching on /off) or a repair is required:
– Turn the programme selector to  Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales  servicea Installation instructions.
Washing machine
en Instruction manual
                    
						

							12
$ 
2	c
$
2 	c 2
>
$
$
Correct installation according to the  
separate Installation instructions.
Check the machine
– Never use a damaged machine. 
– Inform the after-sales services.
Connect the mains plug
Make sure your hands are dry.  
Take hold of the plug only.
Turn the tap on
Compartment II
: detergent for the main wash, water
softener, bleach, stain remover
a
a
Close the washing machine door. Take care not to tr ap
Pour liquid detergent into the appropriate dispense
Your washing machine
Congratulations ä you have opted for a modern, high-quality 
domestic appliance manufactured by Bosch. This wash ing machine 
is distinguished by its economical water and energy  consumption.
Each machine that leaves our factory has been inspe cted thoroughly 
to ensure that it functions properly and is in perf ect condition.
Further information: www.bosch-home.com 
You can find the contact details for your nearest a fter-sales service 
here or in the after-sales service directory (depen ding on model).
GB  0844 8928979
      Calls from a BT landline will be charged at u p to 3 pence per
      minute. A call set-up fee of up to 6 pence ma y apply.
IE 01450 2655
Environmentally friendly waste disposal                                               

All packaging must be disposed of in accordance wit h 
environmental guidelines. 
This appliance is certified in accordance with Euro pean Directive 
2002/96/EEC on waste electrical and electronic equi pment 
(WEEE). 
This directive provides the framework for the EU-wi de collection and 
reuse of used appliances.
Intended use
ContentsPage 
‹Intended use  ...................................... ................................................. 1
‹Programmes  ........................................ ............................................... 1‹Setting and adjusting the programme  ............... ............................ 3
‹Washing ........................................................................................... 3/4
‹After washing ..................................... ................................................. 4‹Individual settings  ............................... ........................................... 5/6
‹Important information  ............................. .......................................... 6
‹Overview of programmes  ............................ .................................... 7‹Safety instructions  ............................................................................. 8
‹Consumption values  ................................ ......................................... 8
‹Care  ..................................................................................................... 9‹Information on the indicator lights ............... ................................... 9
‹Maintenance  .................................................................................... 10
‹What to do if... .................................................................................. 11
Protection of the environment/Conservation tips– Always fill the washing machine with a maximum amo unt of 
laundry for the relevant programme.
– Wash normally soiled laundry without a prewash. 
– Instead of  MCottons 90 °C , choose the programme
M Cottons 60 °C  with the additional function  jEcoPerfect .
Comparable cleaning result with significantly lower  energy 
consumption.
– Measure the detergent according to the manufacturer s 
instructions and water hardness.
– If the laundry is then dried in the tumble dryer,  select the spin 
speed according to the instructions of the dryer ma nufacturer.
Preparationa
Spin
speed*Programme selectorStart/
Pause
Programme selector for  
switching the machine on  
and off and for selecting  
the programme. Can be  
turned in either direction.
Programmes
Detailed overview of programmes  apage 7 .
The spin speed can be selected individually, irresp ective of 
the selected programme and programme progress.
M CottonsHard-wearing fabrics
PrewashHard-wearing fabrics, prewash at 30 °C
N MixDifferent types of laundry
@SuperQuick  15’Short programme
2Rinse /	 SpinLaundry washed by hand, 2  (Rinse plus)  button activated; if only 
using the spin cycle, deactivate the but- 
ton
> DrainDrain rinsing water for   (without final 
spin)
ÿü /O  WoolHand/machine-washable wool
Q Delicates/SilkDelicate washable fabrics
IEasy-CareEasy-care fabrics
a
$
~
Compartment  ~: fabric softener, starch
Compartment I : detergent for prewash
‹For domestic use only
‹For washing machine-washable fabrics and hand-wash- 
able wool in detergent solution
‹To be operated with cold drinking water and commer- 
cially available detergents and care products which ar e 
suitable for use in washing machines
.
– Do not leave children unattended near the  washing machine
– The washing machine is not to be used by  children or persons not familiar with the  
operating instructions
– Keep pets away from the washing machine
Read these instructions and the separate  
installation instructions before operating the  
washing machine.
‘a 
‘a
i a
j S 2
‘$
‘
 
 
i
M $
$ $
~
All buttons are  
sensitive and need  
only to be touched  
lightly. If you press  
and hold the spin  
speed button, the  
appliance  
automatically cycles  
through the setting  
options.
Additional 
functionsStatus
indicator

>
$
a
(*model-dependent)
1 2 	 wash 
rinse 
spin 
finished
       
						

							34
Programme has ended when...
... $ (Start /Pause) flashes and the   (finished)  indicator 
light comes on.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  2Rinse /	c Spin.
– Select $(Start /Pause).
Programmes at lower temperatures:– 2 Rinse /	c Spin  (deactivate  2 (Rinse plus)  button) or 
select  >Drain .
– Select $(Start /Pause).
Changing the programme, if ...
... you have selected the wrong programme by mistak e:
– Reselect the programme. 
– Select $(Start /Pause). The new programme starts 
from the beginning.
Sorting and loading laundry
Follow the manufacturers care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load  apage 7 .
Observe the important information  a page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to tr ap items of laundry
between the washing machine door and the rubber sea l.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask you r water supply
company) and manufacturers instructions.
Pour liquid detergent into the appropriate dispense r and place in the drum.
ä

‹
‹‹
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹
M
M j
Before washing for the first time
Wash once without any laundry  a page 9.
Setting and adjusting a programme
Programme selector
Programme selector for  
switching the machine on  
and off and for selecting  
the programme. Can be  
turned in either direction.
a
M N @2 	
2
> 
ÿü O
QI
Additional functions and spin  
speeds  a Individual settings, 
page 5 .
Select  $(Start/Pause)
Washing
1
2 Washing
Detergent drawer with 
compartments 
I, II, ~
Washing machine  
door
~
‹
‹
‹
Dilute viscous fabric softener and fabric condition er with water.
This prevents blockages.
‘a

‘a
i a
j S 2
‘$
‘
 
 
i
M $
$ $
~
3
Drum
Control panel
Service flap
Removing the washing
Open the washing machine door and remove the washin g.
If    (without final spin) is active: Turn the programme  
selector to  >Drain  or select the spin speed. 
Select $(Start /Pause).
– Remove any foreign objects -
risk of rusting.
– Leave the washing machine door and detergent  drawer open so that any residual water can  
evaporate. 
Turning the tap off
Not required for Aqua-Stop models  a refer to installation 
instructions
Switching off
Turn the programme selector to  Off.
1 2 	 
       
						

							56
$  indicator 
2	c
$
2 	c 2
>
$
$
a a
ä

‹
‹‹
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹
M
M j
a
a
M N @2 	
2
> 
ÿü O
QIa
$
~
~
‹
‹
‹
Individual settings
‘Spin speed / without final spina model-dependent
Before and while the selected programme is running,  the spin speed or  (without final rinse, 
laundry soaks in the last rinsing water) can be set . The effects depend on the programme 
progress. 
The maximum selectable spin speed depends on the mo del and on which programme is 
currently selected.
‘Additional functions a and overview of programmes, see  page 7
i SpeedPerfect For washing in a shorter time with a washing outcom e comparable to 
that of the standard programme. Maximum load  a Overview of 
programmes,  page 7.
j EcoPerfect For saving energy with a washing performance compar able to that of 
the standard programme.
S (Easy-iron) Special spin sequence with subsequent fluffing. Mor e gentle final spin 
- residual moisture in the laundry slightly increas ed.
2 (Rinse plus) Additional rinse cycle. For areas with very soft wa ter or for further 
enhancing the spin result.
‘$Start/Pause
For starting or interrupting the programme.
‘Signal
2. Setting the  
volume for ...
1.
Activate the  
setting mode for  
signal volume
Set to 
•1 step Press and hold+Release
Button signals Information signals Set to 
•Setting the  
volume**
Setting the 
volume**
1 step direct
** you may need to select the function several time s.
1200 
1000
800
600
1 step
Visually  
impaired mode* 
ON-OFF Optional:
ON-OFF Set to 
•
*Short signal - function on. 
Long signal - function off.
1 step
1200 
1000
800
600
1200
1000
800
600 1200
1000
800
600
     Important information           
Protecting the laundry and the machine
– When determining the dosage of all washing powders
, additives and cleaning agents, you 
must follow the manufacturers instructions.
– Empty pockets. 
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains,  underwired bras).
– Fasten zips, do up any buttons. 
– Brush sand out of pockets and collars. 
– Remove curtain fittings or place in the laundry ba g.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, choose the additi onal function 
i SpeedPerfect .
Pretreat any stains as necessary.
intense Do not load as much laundry.  Choose a programme with prewash.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment  II in accordance with the manufacturers 
instructions. Turn the programme selector to  MCottons  30 °C  and select $(Start /Pause). 
After approx. 10 minutes, press  $(Start/ Pause ), to pause the programme. Once the 
required soaking time has elapsed, press  $(Start /Pause), again to continue the 
programme, or select a different programme.
Starching               Laundry must not be treated with fabric softener 
Starching is possible in all wash programmes if liq uid starch is used. Pour starch into the 
fabric softener compartment in accordance with the  manufacturers instructions~ (rinse first 
if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantit ies. Salt may damage stainless steel. 
Always follow the dye manufacturers instructions.  Do not use the washing machine for 
bleaching clothes.
g.
 >
$
– Leave the washing machine door and detergent 
a  refer to installation 
1 2 	 
       
						

							7
Overview of programmes a refer to the table of consumption values on page 8  and notes on page 6.Programmes °C max.Type of laundry
Additional functions; informationMCottons
30, 40, 60, 90 °C
7 kg/ 
4 kg*Hard-wearing fabrics, heat-resistant fabrics made of  
cotton or linen
i
 SpeedPerfect*,  j EcoPerfect,  S(Easy-iron),  2 (Rinse plus)
Prewash
40 °C
I Easy-Care
30, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic  
fibres or blended fabrics
i
SpeedPerfect,  jEcoPerfect,  S (Easy-iron),  2 (Rinse plus)
N  Mix
40 °C Fabrics made of cotton or easy-care fabrics i
SpeedPerfect,  jEcoPerfect,  S (Easy-iron),  2 (Rinse plus);
different types of laundry can be washed together
Q  Delicates/Silk
30 °C
2 kgFor delicate, washable fabrics, e.g. made of silk,  
satin, synthetic fibres or blended fabrics (e.g. cur- 
tains)
i
SpeedPerfect,  jEcoPerfect,  S (Easy-iron),  2 (Rinse plus);
No spin between rinse cycles
ÿü /O Wool
cold, 30 °C Hand
ä or machine-washable fabrics made of wool or 
containing wool Particularly gentle wash programme to prevent shrinkage of
 
laundry. Longer programme breaks (fabrics rest in the  detergent 
solution)
@  SuperQuick 15’
30 °C Easy-care fabrics made of cotton, linen, synthetic  
fibres or blended fabrics Short programme, approx. 15 minutes, 
suitable for lightly soiled laundry
Additional  
programmes
2
Rinse/ 	cSpin,  > Drain
* Reduced load for additional  iSpeedPerfect  function
‘
As a  short programme ,N
Mix 40 °C
,with a maximum spin speed, is ideal.
Programmes without prewash - add detergent to compa rtment II, programmes with prewash - distribute the detergent  between compartments Iand  II.
0411 / 9000658155*658155*
WAE24163SN ...
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
8
Safety instructions
– Read the instruction manual and installation instr uctions and all other information enclosed 
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug. 
– Never insert/disconnect the mains plug with damp h ands.
Danger to lifeFor worn-out appliances: 
– Disconnect the mains plug.
– Sever the mains cable and discard along with the p lug.
– Destroy the lock on the washing machine door. This  will prevent 
children from locking themselves in and risking the ir lives.
Danger of suffocation– Keep packaging, film and packaging parts out of th e reach of 
children.
Risk of poisoning – Keep detergents and care products out of the reach  of children.
Risk of explosion– Items of laundry pretreated with cleaning agents c ontaining 
solvents, e.g. stain remover/cleaning solvent may c ause an 
explosion after being loaded into the washing machi ne.
Rinse items of laundry thoroughly by hand beforehan d.
Risk of injury– The washing machine door can become very hot. 
– Be careful when draining hot detergent solution. 
– Do not climb onto the washing machine. 
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating .
– Be careful when opening the detergent drawer while  the machine 
is in operation.
 Consumption values    depending on model
Programme Load Electricity***Water***Programme
duration***
M Cottons 30 °C* 7 kg 0,55 kWh 60 l 02:36 h
MCottons 40 °C* 7 kg 0,69 kWh 60 l 02:36 h
MCottons 60 °C* 7 kg 1,33 kWh 60 l 02:41 h
M Cottons 90 °C 7 kg 2,00 kWh 64 l 02:48 h
 Easy-Care 40 °C* 3 kg 0,55 kWh 55 l 01:37 h
N cMix 40 °C 3 kg 0,48 kWh 32 l 01:03 h
Q cDelicates/Silk 30 °C 2 kg 0,21 kWh 31 l 00:41 h
ÿü //  Wool 30 °C 2 kg 0,19 kWh 39 l 00:40 h
* Programme setting for testing in accordance with va lid standard EN60456.
Note on comparative tests: For testing the test programm es, wash the specified load using the maximum spin speed.
Programme Additional function Load Annual energy 
consumption Annual water  
consumption
M
Cottons 40/60 °C  jEcoPerfect** 7/3,5 kg  197 kWh 10560 l
** Programme setting for testing and energy labelling in a ccordance with EU directive 2010/30/EU with cold water ( 15 ºC).
*** The values deviate from the indicated values depe nding on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, de tergent used, fluctuations in the power supply and se lected additional 
functions.
I $
a aa
>
2 	c>
$
‘
‘$
a
‘ a
‘$
‘a
a
‘
‘
S a
a
‘
‘a
‘M
‘1
‘a
a
‘a
‘
‘
‘
2	
a
                    
						

							a
Mi j S 2
I i j S 2
N i j S 2
Q i j S 2
ÿü O ä
@ 2	c>
i
‘
N

M 
M
M 
MN c
Q c
ÿü /
M  j
9
Care              
Before washing for the first time
Do not load any laundry into the machine. Turn on t he tap. Add the following to compartment 
II :
– approx. 1 litre water  
– detergent (dosage according to the manufacturers  instructions for light soiling and the 
appropriate degree of water hardness)
Set the programme selector to  IEasy-Care 60 °C  and select $ (Start /Pause). At the end 
of the programme, turn the programme selector to  Off.
Machine housing, control panel
– Wipe with a soft, damp cloth. 
– Do not use any abrasive cloths, scourers or cleani ng agents (stainless steel cleaners). 
– Remove detergent and cleaning agent residue immedi ately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener res idues.
1. Pull out, press insert down, remove draw completely .
2. To remove the insert: press the insert upwards from  below with your 
finger.
3. Clean the detergent dispenser tray and insert with  water and a brush and 
dry it.
4. Attach the insert and engage (connect the cylinder  to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residua l water can 
evaporate.
Drum
Leave the washing machine door open so that the dru m can dry out.
Rust stains - use chlorine-free cleaning agent, not  steel wool.
Descaling                      Ensure there is no laundry in the machine
Descale the appliance according to the descaler man ufacturers instructions. This should not 
be necessary if the correct dosage of detergent is  used.
Information on the indicator lights    model-dependent
A signal sounds and indicator lights for the spin speed flash:
¤
¤
¤
¤
¤
Close the washing  
machine door properly;  
laundry may be caught.¤
¤
¤
¤
¤
Detergent solution pump  
blocked; Clean the  
detergent solution pump a page 10.
Drainage hose/waste pipe  
blocked; Clean the drainage  
hose at the siphon  a  page 10 .¤
¤
¤
¤
¤
Open the tap completely,  
supply hose kinked or  
trapped; 
Clean the filter  a page 10 ,
Water pressure too low.
¤
¤
¤
¤
¤
Motor fault. Call the after- 
sales service.¤
¤
¤
¤
¤
Water in the base tub,  
appliance leaking. Call the  
after-sales service.
– Risk of electric shock.  Disconnect the 
mains plug.
– Risk of explosion.  No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to  Off and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose:  Remove the drainage hose from the retainer and pul l it 
from the housing. Remove the container. 
Remove the sealing cap, allow the detergent solutio n to flow out.
Replace the sealing cap and place the drainage hose in th e retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover until the 
detergent solution begins to flow out. When the serv ice flap is half full, close the pump cover 
and empty the service flap. Repeat the above steps unt il all the detergent solution has 
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing  (the impeller in the detergent 
solution pump must rotate).
5. Replace the pump cover and screw it tightly in place.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight int o the drain during the next wash: pour 1 litre of water into 
compartment  II and start the  > Drain  programme.
Drainage hose at the siphon
Turn the programme selector to  Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage  hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with  the hose clamp.
Filter in the water supply
Risk of electric shock. 
Do not immerse the HydroSafe safety device in water (it contains an electric valve).
Reduce the water pressure in the supply hose: 
1. Turn off the tap.
2. Select any programme (except for  2Rinse /	c Spin //  >Drain ).
3. Select $(Start /Pause). Let the programme run for approximately 40 seco nds.
4. Turn the programme selector to  Off. Disconnect the mains plug.  
Clean the filter:
1. Depending on model: 
Disconnect the hose from the tap.  
Clean the filter using a small brush. 
and/or  for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance.  
 Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
–Risk of scalding.
Allow the detergent solution to cool down.
– Turn off the tap.
‘
‘$
a
‘ a
‘$
‘a
a
‘
‘
S a
a
‘
‘a
‘M
‘1
‘a
a
‘a
‘
‘
‘
2	
a
                    
						

							a
Mi j S 2
I i j S 2
N i j S 2
Q i j S 2
ÿü O ä
@ 2	c>
i
‘
N

M 
M
M 
MN c
Q c
ÿü /
M  j
I $
a aa
>
2 	c>
$
11
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not  
dispensed. –
$ (Start /Pause) not selected?
– Tap not turned on? 
– Filter blocked? Clean the filter a page 10.
– Supply hose kinked or trapped?
‘Washing machine door  
cannot be opened. – Safety function active. Wait approx. 2 minutes.– Is  (without final spin) selected? a
 page 3, 4.
‘Programme does not  
start. –
$ (Start/ Pause) selected?
– Washing machine door closed?
‘Detergent solution is  
not drained.– Is  (without final spin) selected? a  page 3, 4.
– Clean the detergent solution pump  a page 10.
– Clean the waste pipe and/or drainage hose.
‘Water not visible in the  
drum. – Not a fault - water below the visible area.
‘Unsatisfactory spin  
result. 
Laundry wet/too damp.– Not a fault - the unbalanced-load detection system
 has cancelled 
the spin cycle because of uneven distribution of th e laundry.
Distribute small and large items of laundry evenly  inside the drum.
– S  (Easy-iron)  selected? a page 5.
– Too low a speed selected?  a page 5 .
‘Spin cycle performed  
several times. – Not a fault - unbalanced load detection system adj
usts the 
imbalance.
‘Residual water in the  
compartment for care  
products. – Not a fault - the action of the care product is not
 affected.
– Clean the insert if necessary  a page 9 .
‘Odour formation in the  
washing machine. – Run programme 
MCottons  90 °C without laundry. Use 
standard detergent.
‘1  (wash)  display lamp 
flashes. Foam may be  
coming out of the  
detergent drawer. – Too much detergent used? Mix 1 tablespoon of fabri
c softener 
with ½ litre of water and pour into dispenser  II(not for outdoor 
and down-filled textiles!).
– Reduce the detergent dosage for the next wash cycl e.
‘Intense noise formation,  
vibrations and  
“walking” during the  
spin cycle.– Are the appliance feet fixed?
Secure the appliance feet a Installation instructions .
– Transportation safety devices removed? Remove the transportation safety devices  a Installation 
instructions .
‘Noises during spin and  
drain cycles. – Clean detergent-solution pump 
apage 10.
‘The indicator lights do  
not function during  
operation. – Power cut? 
– Fuses tripped? Reset/change the fuse. 
– If the fault occurs repeatedly, call the after-sal
es service.
‘Programme sequence  
longer than usual.– Not a fault - unbalanced load detection system adj
usts imbalance 
by repeatedly distributing the laundry.
– Not a fault - foam detection system active - adds  an additional 
rinse cycle.
‘Detergent residues on  
the laundry. – Occasionally, phosphate-free detergents contain wa
ter-insoluble 
residues.
– Select  2Rinse/ 	 Spin  or brush out the laundry after washing.
If you cannot correct a fault yourself (switching o n/off) or a repair is required:
– Turn the programme selector to  Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales  servicea Installation instructions.
Washing machine
en Instruction manual