Bosch WAE 24160 User Manual

123456
Programme has ended when...
... Start/Pause flashes and the  terminado (End) indicator 
light comes on.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  2/Centrifug. (Rinse/Spin).
– Select  Inicio Pausa ( Start /Pause).
Programmes at lower temperatures:– 2 /centrifug. (Rinse/Spin) (deactivate  Skin Care (Aqua 
Plus)  button) or select  >(Drain) .
– Select  Inicio Pausa ( Start /Pause).
Changing the programme, if ...
... you have selected the wrong programme by...

7
Overview of programmes –> refer to the table of consumption values on page 8 and notes on page 6.    Programmes °C max. Type of laundry
Additional functions; informationResistentes/Algod.  
(Cottons+Linens)
30, 40, 60, 90 °C
7 kg/
4 kg* Hard-wearing fabrics, heat-resistant fabrics made of  
cotton or linen
i
Turbo Perfect*,  jEco Perfect,  SFácil (Easy-iron), Skin Care 
(Aqua Plus)
+ Prelav.  
(Prewash)
40 °C
Sintéticos  
(Easy-care)
30, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic...

12
2
2 >
Correct installation according to the  
separate Installation instructions.
Check the machine
– Never use a damaged machine. 
– Inform the after-sales services.
Connect the mains plug
Make sure your hands are dry.  
Take hold of the plug only.
Turn the tap on
Compartment II: detergent for the main wash, water softener,
bleach, stain remover
Close the washing machine door. Take care not to tra
Pour liquid detergent into the appropriate dispense
Your washing machine
Congratulations ä You have...

34
Programme has ended when...
... Start/Pause flashes and the  terminado (End) indicator 
light comes on.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  2/Centrifug. (Rinse/Spin).
– Select  Inicio Pausa ( Start/Pause).
Programmes at lower temperatures:– 2 /centrifug. (Rinse/Spin) (deactivate  Skin Care (Aqua 
Plus)  button) or select  >(Drain) .
– Select  Inicio Pausa ( Start/Pause).
Changing the programme, if ...
... you have selected the wrong programme by mistak...

56
2
2 Skin Care (Aqua 
>
/Pause). The new programme 
ä

‹‹‹‹‹‹‹‹‹‹‹‹‹‹
j
Z 2 > :
~
~
‹‹
‹
Individual settings
‘Spin speed/without final spin   –> model-dependent
Before and while the selected programme is running,  the spin speed or Spülstop (rinse hold, 
without final rinse, laundry soaks in the last rins ing water) can be set. The effects depend on 
the programme progress. 
The maximum selectable spin speed depends on the mo del and on which programme is 
currently selected....

7
Overview of programmes 
–> refer to the table of consumption values on page 8 and notes on page 6.
    
Programmes °C max.Type of laundry
Additional functions; informationResistentes/Algod.  
(Cottons+Linens)
30, 40, 60, 90 °C
7 kg/
4 kg* Hard-wearing fabrics, heat-resistant fabrics made of  
cotton or linen
i
Turbo Perfect*,  jEco Perfect,  SFácil (Easy-iron), Skin Care 
(Aqua Plus)
+ Prelav.  
(Prewash)
40 °C
Sintéticos  
(Easy-care)
30, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen,...

i j S 
i j S 
i j S 
i j S
: € ä
Z i j S
 >
i
‘
j
: :
9
Care              
Before washing for the first time
Do not load any laundry into the machine. Turn on t he tap. Add the following to compartment 
II :
– approx. 1 litre water  
– detergent (dosage according to the manufacturers  instructions for light soiling and the 
appropriate degree of water hardness)
Set the programme selector to  Sintéticos (Easy-care) 60 °C  and select Inicio Pausa( Start/
Pause). At the end of the programme, turn the progr...

i j S 
i j S 
i j S 
i j S
: € ä
Z i j S
 >
i
‘
j
: :
>
2 >
11
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not dispensed. –
Inicio  Pausa ( Start/Pause) not selected?
– Tap not turned on?
– Filter blocked? Clean the filter  –> page 10.
– Supply hose kinked or trapped?
‘Washing machine door  
cannot be opened. – Safety function active. Wait approx. 2 minutes.– Is Spülstop (Rinse...