Bosch WAE 20164 User Manual

123456
Programme has ended when...
... Start/Pause  $ flashes and the  terminado (finished)  
indicator light comes on.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  /Centrifug. ( Rinse/Spin).
– Select  Inicio/Pausa ( Start/Pause).
Programmes at lower temperatures:–  /Centrifug . (Rinse/Spin) (deactivate  Skin Care 
(Rinse Plus)  button) or select  >(Empty) .
– Select  Inicio/Pausa ( Start/Pause).
Changing the programme, if ...
... you have selected the wrong...

7
Overview of programmes –> refer to the table of consumption values on page 8 and notes on page 6.    Programmes °C max. Type of laundry
Additional functions; informationResistentes/Algod.  
(Cottons) 
frío (cold), 40, 60,  
90 °C 7 kg/
4 kg* Hard-wearing fabrics, heat-resistant fabrics made of 
cotton or linen
TurboPerfect  
i*, EcoPerfect  j, Fácil  S(Easy Iron), Skin Care 
(Rinse Plus)
+ Prelav. (Prewash) 
40 °C
Sintéticos  
(Easy-Care)
frío (cold), 40,  
60 °C
3 kgEasy-care fabrics made of cotton,...

12
$

 >
Correct installation according to the  
separate Installation instructions.
Check the machine
– Never use a damaged machine. 
– Inform the after-sales services.
Connect the mains plug
Make sure your hands are dry.  
Take hold of the plug only.
Turn the tap on
Compartment II: detergent for the main wash, water softener,
bleach, stain remover
Close the washing machine door. Take care not to tra
Pour liquid detergent into the appropriate dispense
Your washing machine
Congratulations ä you have...

34
Programme has ended when...
... Start/Pause  $ flashes and the  terminado (finished)
indicator light comes on.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  /Centrifug. ( Rinse/Spin).
– Select  Inicio/Pausa ( Start/Pause).
Programmes at lower temperatures:–  /Centrifug . (Rinse/Spin) (deactivate  Skin Care 
(Rinse Plus)  button) or select  >(Empty) .
– Select  Inicio/Pausa ( Start/Pause).
Changing the programme, if ...
... you have selected the wrong programme...

56
$

 >
ä

‹‹‹‹‹‹‹‹‹‹‹‹‹‹
j
c 
>ÿü
“c
I
~
~
‹‹
‹
Individual settings
‘Spin speed   –> model-dependent
Before and while the selected programme is running,  the spin speed or  (rinse hold, 
without final rinse, laundry soaks in the last rins ing water) can be set. The effects depend on 
the programme progress. 
The maximum selectable spin speed depends on the mo del and on which programme is 
currently selected.
‘Additional functions    –> and overview of programmes, see  page...

7
Overview of programmes 
–> refer to the table of consumption values on page 8 and notes on page 6.
    
Programmes °C max.Type of laundry
Additional functions; informationResistentes/Algod.  
(Cottons)
frío (cold), 40, 60,  
90 °C7 kg/
4 kg* Hard-wearing fabrics, heat-resistant fabrics made of 
cotton or linen
TurboPerfect  
i*, EcoPerfect  j, Fácil  S(Easy Iron), Skin Care 
(Rinse Plus)
+ Prelav. (Prewash) 
40 °C
Sintéticos  
(Easy-Care)
frío (cold), 40,  
60 °C
3 kgEasy-care fabrics made of cotton,...

i j Si j S 
i j S 
i j S
 ä
2 >
i
‘
j
9
Care              
Before washing for the first time
Do not put any laundry in the machine. Turn on the  tap, add approximately 1 litre of water and 
then ½ a measuring cup of detergent into compartmen t II. Turn the programme selector to 
Sintéticos (Easy-Care) 60 °C  and choose Inicio/Pausa ( Start/Pause). At the end of the 
programme, turn the programme selector to  Stop.
Machine housing, control panel
– Wipe with a soft, damp cloth. 
– Do not use any...

i j Si j S 
i j S 
i j S
 ä
2 >
i
‘
j
>
 >
11
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not dispensed. –
Inicio /Pausa  (Start /Pause) not selected?
– Tap not turned on?
– Filter blocked? Clean the filter  –> page 10.
– Supply hose kinked or trapped?
‘Washing machine door  
cannot be opened. – Safety function active. Wait approx. 2 minutes.– Is  (Rinse Hold, without...