Bosch WAE 16164 User Manual

123456
Programme has ended when...
... Start/Pause flashes and the  End indicator light comes 
on.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  2Rinse/Spin 	).
– Select  Start/Pause  $.
Programmes at lower temperatures:– 2 Rinse/Spin 	 (deactivate  Rinse Plus button) or select 
> Empty .
– Select  Start/Pause $.
Changing the programme, if ...
... you have selected the wrong programme by mistak e:
– Reselect the programme. 
– Select  Start/Pause $. The new programme...

7
Overview of programmes –> refer to the table of consumption values on page 8 and notes on page 6.    Programmes °C max. Type of laundry
Additional functions; informationLFCottons
30, 40, 60, 90 °C
7 kg/
4 kg* Hard-wearing fabrics, heat-resistant fabrics made of  
cotton or linen
i
Speed Perfect*,  jEco Perfect,  SEasy-iron,  2Rinse Plus
Prewash
40 °C
IEasy-care
30, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic  
fibres or blended fabrics
i
Speed Perfect,  jEco Perfect,  SEasy-iron,...

12
2	
$
2 	
>
$
$
Correct installation according to the  
separate Installation instructions.
Check the machine
– Never use a damaged machine. 
– Inform the after-sales services.
Connect the mains plug
Make sure your hands are dry.  
Take hold of the plug only.
Turn the tap on
Compartment II
: detergent for the main wash, water softener,
bleach, stain remover
Close the washing machine door. Take care not to tra
Pour liquid detergent into the appropriate dispense
Your washing machine
Congratulations ä you...

34
Programme has ended when...
... Start/Pause flashes and the  End indicator light comes 
on.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  2Rinse/Spin 	).
– Select  Start/Pause  $.
Programmes at lower temperatures:– 2 Rinse/Spin 	 (deactivate  Rinse Plus button) or select 
> Empty .
– Select  Start/Pause $.
Changing the programme, if ...
... you have selected the wrong programme by mistak e:
– Reselect the programme. 
– Select  Start/Pause $. The new programme...

56
2	
$
2 	 button) or select 
>
$
$. The new programme starts from 
ä

‹‹‹‹
‹‹‹‹‹‹‹‹‹‹
LFLF
j
$
LF 
N
@ 2
	
>: I
~
~
‹‹
‹
Individual settings
‘Spin speed in rpm/without final spin  –> model-dependent
Before and while the selected programme is running,  the spin speed or Spülstop (rinse hold, 
without final rinse, laundry soaks in the last rins ing water) can be set. The effects depend on 
the programme progress. 
The maximum selectable spin speed depends on the mo del and on which...

7
Overview of programmes 
–> refer to the table of consumption values on page 8 and notes on page 6.
    
Programmes °C max.Type of laundry
Additional functions; informationLFCottons
30, 40, 60, 90 °C
7 kg/
4 kg* Hard-wearing fabrics, heat-resistant fabrics made of  
cotton or linen
i
Speed Perfect*,  jEco Perfect,  SEasy-iron, 
2
Rinse Plus
Prewash
40 °C
IEasy-care
30, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic  
fibres or blended fabrics
i
Speed Perfect,  jEco Perfect,...

LFi j S
2
I
i j S
2
LIF i j S
2
i j S
2
: O
€ ä
@

	
>
i
‘
LIF

LF 
LF
LF
LF j
LF
LIF
I
::
LIF
9
Care              
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap. Add the following to compartment 
II :
– approx. 1 litre water  
– detergent (dosage according to the manufacturers  instructions for light soiling and the 
appropriate degree of water hardness)
Set the programme selector to  Easy-care 60 °C  and select Start/Pause $. At the end of...

LFi j S
2
I
i j S
2
LIF i j S
2
i j S
2
: O
€ ä
@

	
>
i
‘
LIF

LF 
LF
LF
LF j
LF
LIF
I
::
LIF
$
>
2	>
$
11
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not dispensed. –
Start /Pause $ not selected?
– Tap not turned on? 
– Filter blocked? Clean the filter  –> page 10.
– Supply hose kinked or trapped?
‘Washing machine door  
cannot be opened. – Safety function...