Bosch WAA 28222 User Manual

1
Safety instructions
– The washing machine is heavy - take care when lifting.
– Caution: frozen hoses may rip/burst. Do not instal l the washing machine in areas exposed 
to frost or outdoors.
– The washing machine could be damaged. Do not lift th e appliance by protruding 
components (e.g. the washing machine door).
– In addition to the instructions provided in this do cument, special regulations from the 
relevant water and electric utility companies may appl y.
– If in doubt, have a technician...

5Manufacturer–> Operating instructions
0808 / 9000150053 0150053
Alignment
Intense noise formation, vibrations and “wandering”  may be the result of incorrect 
alignment.
Aligning the washing machine with a spirit level
1. Loosen the lock nut using a wrench, by turning it i n a clockwise direction.
2. Change the height by turning the appliance feet. 
Caution: all four appliance feet must be firmly on the ground .
The washing machine must not wobble.
Check the alignment of the washing machine with a sp...

1
Safety instructions
– The washing machine is heavy - take care when lifting.
– Caution: frozen hoses may rip/burst. Do not instal l the washing machine in areas exposed 
to frost or outdoors.
– The washing machine could be damaged. Do not lift th e appliance by protruding 
components (e.g. the washing machine door).
– In addition to the instructions provided in this do cument, special regulations from the 
relevant water and electric utility companies may appl y.
– If in doubt, have a technician...

3
Removing the transport braces
– Before using the appliance for the first time, make
 sure that you 
completely remove transport braces and keep them for  subsequent 
transportation.
– If you need to transport the appliance at a later d ate, always re-affix the 
transport braces to prevent damage to the machine. –>  page 6.
– Store the screw and sleeve screwed together.
1. Take the hoses out of the holders.
2.Loosen all 3 screws ...
... until they can move freely in the sleeves.
3.Remove all 3 transport...

5Manufacturer–> Operating instructions
0808 / 90001500530150053
Alignment
Intense noise formation, vibrations and “wandering”  may be the result of incorrect 
alignment.
Aligning the washing machine with a spirit level
1. Loosen the lock nut using a wrench, by turning it i n a clockwise direction.
2. Change the height by turning the appliance feet. 
Caution: all four appliance feet must be firmly on the ground .
The washing machine must not wobble.
Check the alignment of the washing machine with a sp...

7
After-sales service
‘Before you call the after-sales service, please make sure that you cannot remedy the fault 
yourself > Operating instructions;  What to do if...
‘You will be charged if a technician is called out,  even during the warranty period.
‘You can find your nearest after-sales service in th e enclosed list. Please give the after-sales 
service the product number (E no.) and the producti on number (FD) of the appliance.
Product number        Production number You will find the...