Bosch Rotak 34 R Manual
Have a look at the manual Bosch Rotak 34 R Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 101 Bosch manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen Germany www.bosch-garden.com F 016 L81 043 (2013.09) O / 12 XXX Rotak34 R | 37 R | 340 R | 370 RenOriginal instructions OBJ_DOKU-36613-001.fm Page 1 Tuesday, September 24, 2013 3:07 PM
2 | English F 016 L81 043 | (20.9.13)Bosch Power Tools English Safety Notes Warning! Read these instructions carefully, be familiar with the controls and the proper use of the machine. Please keep the instructions safe for later use! Explanation of symbols General hazard safety alert. Read instruction manual. Pay attention that bystanders are not injured through foreign objects thrown from the ma- chine. Warning: Keep a safe distance from the machine when operating. Caution: Do not touch rotating blades. Sharp blade(s). Beware of severing toes or fingers. Not applicable. Switch off and remove plug from mains before ad- justing, cleaning or if the cable is entangled and before leaving the garden product unattended for any period. Keep the supply flexible cord away from the cutting blades. Wait until all machine components have com- pletely stopped before touching them. The blades continue to rotate after the machine is switched off, a rotating blade can cause injury. Do not use the machine in the rain or leave it out- doors when it is raining. Beware electric shock hazard. Keep supply flexible cord away from cutting means. Operation Always wear gardening gloves when handling or work- ing near the sharp blades. Never allow children or people unfamiliar with these in- structions to use the machine. Local regulations may re-strict the age of the operator. When not in use store the machine out of reach of children. This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capa- bilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the machine by a person responsible for their safety. Children should be supervised to ensure that they do not play with the machine. Never mow while people, especially children or pets, are nearby. The operator or user is responsible for accidents or dam- age that occur to people or property. Do not operate the machine when barefoot or wearing open sandals, always wear substantial footwear and long trousers. Thoroughly inspect the area where the machine is to be used and remove all stones, sticks, wires, bones and other foreign objects. Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or damaged blades and bolts to preserve balance. Mow only in daylight or in good artificial light. Avoid operating the machine in wet grass, where feasible. Walk, never run. Never operate the appliance with defective guards or shields, or without safety devices, for example deflectors and/or grass catchers in place. Working on banks can be dangerous. – Do not mow excessively steep slopes. – Always be sure of your footing on slopes or wet grass. – Mow across the face of slopes – never up and down. – Exercise extreme caution when changing direction on slopes. Use extreme caution when stepping back or pulling the ma- chine towards you. Never mow by pulling the mower towards you. Stop the blades if the machine has to be tilted for transpor- tation when crossing surfaces other than grass and when transporting the machine to and from the area to be mowed. Do not tilt the machine when starting or switching on the motor, except if the machine has to be tilted for starting in long grass. In this case, do not tilt it more than absolutely necessary and tilt only the part which is away from the op- erator. Always ensure that both hands are in the operating position before returning the machine to the ground. Switch on the motor according to the instructions with feet well away from rotating parts. Do not put hands or feet near or under rotating parts. Always stand clear of the discharge zone when operating the machine. Never pick up or carry the machine while the motor is run- ning. OBJ_BUCH-2040-001.book Page 2 Friday, September 20, 2013 10:44 AM
English | 3 Bosch Power ToolsF 016 L81 043 | (20.9.13) Keep supply cables and extension cables away from the blade. The blade can cause damage to the cables and lead to contact with live parts. Beware electric shock haz- ard. Do not modify this product. Unauthorized modifications may impair the safety of your product and may result in in- creased noise and vibration. Avoid mowing in bad weather conditions especially when there is a risk of lightning. Remove the plug from the socket: – whenever you leave the machine, – before clearing a blockage, – before checking, cleaning or working on the machine, – after striking a foreign object. Inspect the machine for damage and make repairs as necessary, – if the machine starts to vibrate abnormally (check immedi- ately). Power supply The voltage indicated on the rating plate must correspond to the voltage of the power source. We recommend that this equipment is only connected into a socket which is protected by a circuit-breaker that would be actuated by a 30 mA residual current. Only use or replace power supply cables for this unit which correspond to the types indicated by the manufacturer. Never touch the mains plug with wet hands. Do not run over, crush or pull the power supply cable or ex- tension lead, otherwise it may be damaged. Protect the ca- ble from heat, oil and sharp edges. The extension lead must have a cross section in accord- ance with the operating instructions and be protected against splashed water. The connection must not be in wa- ter. Electrical Safety Warning! Switch off, remove plug from mains before adjusting, cleaning or if cable is cut, damaged or entan- gled. The blades continue to rotate for a few seconds after the machine is switched off. Caution – do not touch the rotating blade. Your machine is double insulated for safety and requires no earth connection. The operating voltage is 230 V AC, 50 Hz (for non-EU countries 220 V, 240 V as applicable). Only use approved extension cables. Contact your Bosch Service Cen- tre for details. Extension cords/leads should only be used if they comply with H05VV-F, H05RN-F types or IEC type design (60227 IEC 53, 60245 IEC 57). If you want to use an extension cable when operating your product, only the following cable dimensions should be used: –1.0mm 2: max. length 40 m –1.5 mm2: max. length 60 m –2.5 mm2: max. length 100 mNote: If an extension cable is used it must be earthed and con- nected through the plug to the earth cable of your supply net- work in accordance with prescribed safety regulations. If in doubt contact a qualified electrician or the nearest Bosch Service Centre. WARNING! Inadequate extension cables can be dan- gerous. Extension cable, plug and socket must be of watertight construction and intended for outdoor use. It is recommended for increased electrical safety to use a Re- sidual Current Device (RCD) with a tripping current of not more than 30 mA. Always check your RCD every time you use it. If the supply cord is damaged, please contact your nearest Bosch Service Centre. For products not sold in GB: WARNING: For your safety, it is required that the plug at- tached to the machine is connected with the extension cord. The coupling of the extension cord must be protected against splash water, be made of rubber or coated with rubber. The extension cord must be used with a cable strain relief. The connection lead must be inspected for signs of visible damage and ageing at regular intervals and may only be used if in perfect condition. Products sold in GB only: Your product is fitted with a BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an author- ised customer service agent. The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains sock- et elsewhere. Maintenance Always wear gardening gloves when handling or work- ing near the sharp blades. Keep all nuts, bolts and screws tight to be sure that the ma- chine is in safe working condition. Check the grass catcher frequently for wear or deteriora- tion. Examine the machine and replace worn or damaged parts for safety. Ensure replacement parts fitted are Bosch approved. Symbols The following symbols are important for reading and under- standing the operating instructions. Please take note of the symbols and their meaning. The correct interpretation of the symbols will help you to use the garden product in a better and safer manner. SymbolMeaning Movement direction OBJ_BUCH-2040-001.book Page 3 Friday, September 20, 2013 10:44 AM
4 | English F 016 L81 043 | (20.9.13)Bosch Power Tools Intended Use The garden product is intended for domestic lawn mowing. Technical Data Noise/Vibration Information Measured sound values determined according to 2000 / 14 / EC (1.60 m height, 1 m distance away). Typically the A-weighted noise levels of the product are: Sound pressure level 82.5 dB(A); sound power level 95 dB (A). Uncertainty K = 1 dB. Vibration total values a h (triax vector sum) and uncertainty K determined according to EN 60335: a h
English | 5 Bosch Power ToolsF 016 L81 043 | (20.9.13) Troubleshooting After-sales Service and Application Service www.bosch-garden.com In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the garden product. Great Britain Robert Bosch Ltd. (B.S.C.) P.O. Box 98 Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ Tel. Service: (0844) 7360109 Fax: (0844) 7360146 E-Mail: [email protected] Ireland Origo Ltd. Unit 23 Magna Drive Magna Business ParkCity West Dublin 24 Tel. Service: (01) 4666700 Fax: (01) 4666888 Australia, New Zealand and Pacific Islands Robert Bosch Australia Pty. Ltd. Power Tools Locked Bag 66 Clayton South VIC 3169 Customer Contact Center Inside Australia: Phone: (01300) 307044 Fax: (01300) 307045 Inside New Zealand: Phone: (0800) 543353 Fax: (0800) 428570 Outside AU and NZ: Phone: +61 3 95415555 www.bosch.com.au Republic of South Africa Customer service Hotline: (011) 6519600 ProblemPossible CauseCorrective Action Motor refuses to start Power turned off Turn power on Mains socket faulty Use another socket Extension cable damaged Inspect cable, replace if damaged Fuse faulty / blown Replace fuse Grass too long Increase height of cut and tilt garden product to reduce starting load Motor protector has activated Allow motor to cool and increase height of cut Machine functions intermittentlyExtension cable damaged Inspect cable, replace if damaged Internal wiring of garden product damaged Contact Service Agent Motor protector has activated Allow motor to cool and increase height of cut Garden product leaves ragged finish and/or Motor laboursHeight of cut too low Increase height of cut Cutting blade blunt Replace the blade Possible clogging Check underneath the garden product and clear out as necessary (always wear gardening gloves) Blade fitted upside down Refit blade correctly Blade not rotating while garden product switched onCutting blade obstructed Switch off garden product Clear obstruction (always wear gardening gloves) Blade nut/bolt loose Tighten blade nut/bolt (17 Nm) Excessive vibrations/noise Blade nut/bolt loose Tighten blade nut/bolt (17 Nm) Cutting blade damaged Replace the blade OBJ_BUCH-2040-001.book Page 5 Friday, September 20, 2013 10:44 AM
6 | English F 016 L81 043 | (20.9.13)Bosch Power Tools Gauteng – BSC Service Centre 35 Roper Street, New Centre Johannesburg Tel.: (011) 4939375 Fax: (011) 4930126 E-Mail: [email protected] KZN – BSC Service Centre Unit E, Almar Centre 143 Crompton Street Pinetown Tel.: (031) 7012120 Fax: (031) 7012446 E-Mail: [email protected] Western Cape – BSC Service Centre Democracy Way, Prosperity Park Milnerton Tel.: (021) 5512577 Fax: (021) 5513223 E-Mail: [email protected] Bosch Headquarters Midrand, Gauteng Tel.: (011) 6519600 Fax: (011) 6519880 E-Mail: [email protected] Disposal Do not dispose of garden products into household waste! Only for EC countries: According to the European directive 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national law, electrical and electronic equipment that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Subject to change without notice. OBJ_BUCH-2040-001.book Page 6 Friday, September 20, 2013 10:44 AM
| 7 Bosch Power ToolsF 016 L81 043 | (20.9.13) 1x C LICK! CLICK! 2x 2x 2x2x 1x 1 2 12.3 kg OBJ_BUCH-2040-001.book Page 7 Friday, September 20, 2013 10:44 AM
F 016 L81 043 | (20.9.13)Bosch Power Tools 8 | 3 OBJ_BUCH-2040-001.book Page 8 Friday, September 20, 2013 10:44 AM
| 9 Bosch Power ToolsF 016 L81 043 | (20.9.13) 1 2 STOP CLICK! STOP 70 mm55 mm45 mm 30 mm 20 mm 4 5 6 OBJ_BUCH-2040-001.book Page 9 Friday, September 20, 2013 10:44 AM
F 016 L81 043 | (20.9.13)Bosch Power Tools 10 | 7 OBJ_BUCH-2040-001.book Page 10 Friday, September 20, 2013 10:44 AM