Bosch Gws 22230 H Manual
Here you can view all the pages of manual Bosch Gws 22230 H Manual. The Bosch manuals for Grinder are available online for free. You can easily download all the documents as PDF.
Page 11
14 | English 1 609 92A 0ML | (9.4.14)Bosch Power Tools A properly attached, undam- aged quick-clamping nut can be loosened by hand when turning the knurled ring in an- ticlockwise direction. Never loosen a tight quick- clamping nut with pliers. Al- ways use the two-pin span- ner. Insert the two-pin span- ner as shown in the illustration. Grinding/Cutting Disc Pay attention to the dimensions of the grinding tools. The mounting hole diameter must fit the mounting flange without play. Do not use...
Page 12
English | 15 Bosch Power Tools1 609 92A 0ML | (9.4.14) Rotating the Main Handle (GWS 24-230 JVX / GWS 26-230 B) Before any work on the machine itself, pull the mains plug. The main handle 34 can be rotated with respect to the ma- chine housing toward the left or right in steps of 90°. In this manner, the On/Off switch can be brought into a more con- venient position for special working situations, e.g., for cut- ting operations using the cutting guide with dust extraction protection guard 18 or for...
Page 13
16 | English 1 609 92A 0ML | (9.4.14)Bosch Power Tools Note: When the braking effect decreases noticeably, the run- on brake has failed. The power tool should be sent immediate- ly to an after-sales service (for addresses, see section “After- sales Service and Application Service”. Reduced starting current (GWS 22-230 JH / GWS 24-230 JH / JVX) The electronic reduced starting current limits the power con- sumption when switching the tool on and enables operation from a 13 ampere fuse. Note: When the...
Page 14
English | 17 Bosch Power Tools1 609 92A 0ML | (9.4.14) Maintenance and Service Maintenance and Cleaning Before any work on the machine itself, pull the mains plug. For safe and proper working, always keep the machine and ventilation slots clean. In extreme conditions, always use dust extraction as far as possible. Blow out ventilation slots frequently and install a residual current device (RCD). When work- ing metals, conductive dust can settle in the interior of the power tool. The total...
Page 15
| 95 Bosch Power Tools1 609 92A 0ML | (9.4.14) OBJ_BUCH-827-007.book Page 95 Wednesday, April 9, 2014 1:53 PM
Page 16
1 609 92A 0ML | (9.4.14)Bosch Power Tools 96 | 1 605 703 099 1 603 340 031 1 603 340 040 1 607 950 043 2 602 025 181 1 601 329 013 1 600 793 007 2 605 438 197 1 605 510 179 Ø 180 mm 1 605 510 180 Ø 230 mm2 605 510 297 2 605 510 298 Ø 180 mm Ø 230 mm 2 605 510 299 2 605 510 300 Ø 180 mm Ø 230 mm 1 605 510 181 1 605 703 099 1 603 340 040 1 607 950 004 GWS 20-230 H GWS 22-180 H GWS 22-230 H/JH GWS 24-180 H GWS 24-230 H/JH GWS 26-180 H GWS 26-230 B/H 1 607 000 247 OBJ_BUCH-827-007.book Page 96 Wednesday,...
Page 17
| 97 Bosch Power Tools1 609 92A 0ML | (9.4.14) 1 600 210 039 1 603 340 031 1 603 340 040 1 607 950 043 2 602 025 181 1 601 329 013 1 600 793 007 2 605 438 197 2 602 025 284 Ø 180 mm 2 602 025 285 Ø 230 mm2 605 510 280 2 605 510 281 Ø 180 mm Ø 230 mm 2 602 025 282 2 602 025 283 Ø 180 mm Ø 230 mm 1 607 000 247 GWS 24-230 JVX OBJ_BUCH-827-007.book Page 97 Wednesday, April 9, 2014 1:53 PM