Home > Bosch > Laser Rangefinder > Bosch Glm 100 C Manual

Bosch Glm 100 C Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Bosch Glm 100 C Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 101 Bosch manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Robert Bosch GmbH
    Power Tools Division
    70745 Leinfelden-Echterdingen
    Germany
    www.bosch-pt.com
    2 609 141 026 (2013.07) O / 368 EURO  
    GLM 100 C ProfessionaldeOriginalbetriebsanleitung
    enOriginal instructions
    frNotice originale
    esManual original
    ptManual original
    itIstruzioni originali
    nlOorspronkelijke 
    gebruiksaanwijzing
    daOriginal brugsanvisning
    svBruksanvisning i original
    noOriginal driftsinstruks
    fiAlkuperäiset ohjeet
    elΠρωτότυπο οδηγιών χρήσηςtrOrijinal işletme talimatı
    plInstrukcja oryginalna
    csPůvodní návod k používání
    skPôvodný návod na použitie
    huEredeti használati utasítás
    ruОригинальное руководство 
    по эксплуатации
    ukОригінальна інструкція з 
    експлуатації
    kkПайдалану нұсқаулығының 
    түпнұсқасы 
    roInstrucţiuni originale
    bgОригинална инструкцияmkОригинално упатство за работа
    srOriginalno uputstvo za rad
    slIzvirna navodila
    hrOriginalne upute za rad
    etAlgupärane kasutusjuhend
    lvInstrukcijas oriģinālvalodā
    ltOriginali instrukcija
    ar
    fa
    Âé%‰ þæÆ
    ‰ Œ¼úÅ–é‰ Ò¼‰“ sÞÆ‘
    OBJ_DOKU-34784-002.fm  Page 1  Monday, July 1, 2013  11:40 AM 
    						
    							3 |  
    2 609 141 026 | (1.7.13)Bosch Power Tools
    GLM 250 VFP
    ro
    fessionalGLM 100 C
    P
    ro
    fessional
    GLM 100  C
    26 101112
    13
    1
    2
    3
    4
    5
    7
    89620
    19181721
    2214
    15
    16
    23
    25
    24 a
    c b gik
    f
    e
    d
    h
    mnl
    OBJ_BUCH-1956-002.book  Page 3  Monday, July 1, 2013  11:28 AM 
    						
    							2 609 141 026 | (1.7.13)Bosch Power Tools
    4 |  
    ••
    •
    •
    ••ç
    X
    X 1 1
    2X1
    max
    min
    A A
    A
    AA
    B
    DEC
    OBJ_BUCH-1956-002.book  Page 4  Monday, July 1, 2013  11:28 AM 
    						
    							5 |  
    2 609 141 026 | (1.7.13)Bosch Power Tools
    1
    27
    2
    3
    28
    27
    I
    32
    H
    180º 90º180º
    GF
    AB
    3
    B2
    B1
    OBJ_BUCH-1956-002.book  Page 5  Monday, July 1, 2013  11:28 AM 
    						
    							2 609 141 026 | (1.7.13)Bosch Power Tools
    6 |  
    90º90º
    K
    J
    180º
    1
    180º
    OBJ_BUCH-1956-002.book  Page 6  Monday, July 1, 2013  11:28 AM 
    						
    							  | 7
    Bosch Power Tools2 609 141 026 | (1.7.13)
    1 608 M00 05B
    30
    0 601 079 000
    27
    2 607 001 391
    31
    BS 150
    0 601 096 974
    29
    OBJ_BUCH-1956-002.book  Page 7  Monday, July 1, 2013  11:28 AM 
    						
    							 English | 19
    Bosch Power Tools2 609 141 026 | (1.7.13)
    Kundendienst und Anwendungsberatung
    Der Kundendienst beantwortet Ihre Fragen zu Reparatur und 
    Wartung Ihres Produkts sowie zu Ersatzteilen. Explosions-
    zeichnungen und Informationen zu Ersatzteilen finden Sie 
    auch unter:
    www.bosch-pt.com
    Das Bosch-Anwendungsberatungs-Team hilft Ihnen gerne bei 
    Fragen zu unseren Produkten und deren Zubehör.
    www.powertool-portal.de, das Internetportal für Handwer-
    ker und Heimwerker.
    Geben Sie bei allen Rückfragen und Ersatzteilbestellungen 
    bitte unbedingt die 10-stellige Sachnummer laut Typenschild 
    des Messwerkzeugs an.
    Deutschland
    Robert Bosch GmbH
    Servicezentrum Elektrowerkzeuge
    Zur Luhne 2
    37589 Kalefeld – Willershausen
    Unter www.bosch-pt.com können Sie online Ersatzteile be-
    stellen oder Reparaturen anmelden.
    Kundendienst: Tel.: (0711) 40040480
    Fax: (0711) 40040481
    E-Mail: [email protected]
    Anwendungsberatung: Tel.: (0711) 40040480
    Fax: (0711) 40040482
    E-Mail: [email protected]
    Österreich
    Tel.: (01) 797222010
    Fax: (01) 797222011
    E-Mail: [email protected]
    Schweiz
    Tel.: (044) 8471511
    Fax: (044) 8471551
    E-Mail: [email protected]
    Luxemburg
    Tel.: +32 2 588 0589
    Fax: +32 2 588 0595
    E-Mail: [email protected]
    Entsorgung
    Messwerkzeuge, Zubehör und Verpackungen sollen einer um-
    weltgerechten Wiederverwertung zugeführt werden.
    Werfen Sie Messwerkzeuge nicht in den Hausmüll!
    Nur für EU-Länder:
    Gemäß der europäischen Richtlinie 
    2012/19/EU müssen nicht mehr ge-
    brauchsfähige Messwerkzeuge und gemäß 
    der europäischen Richtlinie 2006/66/EG 
    müssen defekte oder verbrauchte Akkus/ 
    Batterien getrennt gesammelt und einer 
    umweltgerechten Wiederverwendung zu-
    geführt werden.Nicht mehr gebrauchsfähige Akkuzellen/Batterien können di-
    rekt abgegeben werden bei:
    Deutschland
    Recyclingzentrum Elektrowerkzeuge
    Osteroder Landstraße 3
    37589 Kalefeld
    Schweiz
    Batrec AG
    3752 Wimmis BE
    Akkus/Batterien:
    Integrierte Akkus dürfen nur zur Entsorgung entnom-
    men werden. Durch das Öffnen der Gehäuseschale kann 
    das Messwerkzeug zerstört werden.
    Entladen Sie den Akku komplett. Drehen Sie alle Schrauben 
    am Gehäuse heraus und öffnen Sie die Gehäuseschale. Tren-
    nen Sie die Anschlüsse am Akku und nehmen Sie den Akku he-
    raus.
    Werfen Sie Akkus/Batterien nicht in 
    den Hausmüll, ins Feuer oder ins Was-
    ser. Akkus/Batterien sollen, wenn 
    möglich entladen, gesammelt, recy-
    celt oder auf umweltfreundliche Weise 
    entsorgt werden.
    Änderungen vorbehalten.
    English
     Safety Notes
    Working safely with the 
    measuring tool is possible 
    only when the operating and 
    safety information are read 
    completely and the instruc-
    tions contained therein are strictly followed. Never make 
    warning labels on the measuring tool unrecognisable. 
    SAVE THESE INSTRUCTIONS.
    Caution – The use of other operating or adjusting 
    equipment or the application of other processing meth-
    ods than those mentioned here, can lead to dangerous 
    radiation exposure. 
    The measuring tool is provided with a warning label.
    OBJ_BUCH-1956-002.book  Page 19  Monday, July 1, 2013  11:28 AM 
    						
    							20 | English 
    2 609 141 026 | (1.7.13)Bosch Power Tools
    If the text of the warning label is not in your national 
    language, stick the provided warning label in your na-
    tional language over it before operating for the first 
    time.
    Do not direct the laser beam at persons or animals and 
    do not stare into the laser beam yourself. This measur-
    ing tool produces laser class 2 laser radiation according to 
    IEC 60825-1. This can lead to persons being blinded.
    Do not use the laser viewing glasses as safety goggles. 
    The laser viewing glasses are used for improved visualisa-
    tion of the laser beam, but they do not protect against laser 
    radiation.
    Do not use the laser viewing glasses as sun glasses or in 
    traffic. The laser viewing glasses do not afford complete 
    UV protection and reduce colour perception.
    Have the measuring tool repaired only through quali-
    fied specialists using original spare parts. This ensures 
    that the safety of the measuring tool is maintained.
    Do not allow children to use the laser measuring tool 
    without supervision. They could unintentionally blind 
    other persons or themselves.
    Do not operate the measuring tool in explosive environ-
    ments, such as in the presence of flammable liquids, 
    gases or dusts. Sparks can be created in the measuring 
    tool which may ignite the dust or fumes.
    Protect the measuring tool against heat, e.g., 
    against continuous intense sunlight, fire, wa-
    ter, and moisture. Danger of explosion.
    In case of damage and improper use of the battery, va-
    pours may be emitted. Ventilate the area and seek 
    medical help in case of complaints. The vapours can irri-
    tate the respiratory system.
    Caution! When using the measuring tool with Blue-
    tooth®, interference with other devices and systems, 
    airplanes and medical devices (e. g., cardiac pacemak-
    ers, hearing aids) may occur. Also, the possibility of hu-
    mans and animals in direct vicinity being harmed can-
    not be completely exempt. Do not use the measuring 
    tool with Bluetooth® in the vicinity of medical devices, 
    petrol stations, chemical plants, areas where there is 
    danger of explosion, and areas subject to blasting. Do 
    not use the measuring tool with Bluetooth® in air-
    planes. Avoid operation in direct vicinity of the body 
    over longer periods. 
    The Bluetooth® word mark and logos are registered trade-
    marks owned by Bluetooth SIG, Inc. and any use of such 
    marks by Robert Bosch Ltd. is under license.Safety Warnings for Battery Chargers
    Keep the battery charger away from rain or 
    moisture. Penetration of water in the battery 
    charger increases the risk of an electric shock.
    Only charge Bosch lithium ion batteries or lithium ion 
    batteries installed in Bosch products. The battery volt-
    age must match the battery charging voltage of the 
    charger. Otherwise there is danger of fire and explosion.
    Keep the battery charger clean. Contamination can lead 
    to danger of an electric shock.
    Before each use, check the battery charger, cable and 
    plug. If damage is detected, do not use the battery 
    charger. Never open the battery charger yourself. 
    Have repairs performed only by a qualified technician 
    and only using original spare parts. Damaged battery 
    chargers, cables and plugs increase the risk of an electric 
    shock.
    This battery charger can be used by children aged from 
    8 years and above and persons with reduced physical, 
    sensory or mental capabilities or lack of experience 
    and knowledge if they have been given supervision or 
    instruction concerning use of the battery charger in a 
    safe way and understand the hazards involved. Other-
    wise, there is danger of operating errors and injuries.
    Supervise children. This will ensure that children do not 
    play with the charger.
    Cleaning and user maintenance of the battery charger 
    shall not be made by children without supervision.
    Products sold in GB only: Your product is fitted with a 
    BS 1363/A approved electric plug with internal fuse (ASTA 
    approved to BS 1362).
    If the plug is not suitable for your socket outlets, it should be 
    cut off and an appropriate plug fitted in its place by an author-
    ised customer service agent. The replacement plug should 
    have the same fuse rating as the original plug.
    The severed plug must be disposed of to avoid a possible 
    shock hazard and should never be inserted into a mains sock-
    et elsewhere.
    Product Description and Specifica-
    tions
    Intended Use
    The measuring tool is intended for measuring distances, 
    lengths, heights, clearances, grades and for the calculation of 
    areas and volumes. The measuring tool is suitable for measur-
    ing indoors and outdoors.
    The measuring results can be transmitted to other devices via 
    Bluetooth® and USB data port (not when operating the meas-
    uring tool in the R60 Professional measuring rail).
    OBJ_BUCH-1956-002.book  Page 20  Monday, July 1, 2013  11:28 AM 
    						
    							 English | 21
    Bosch Power Tools2 609 141 026 | (1.7.13)
    Technical Data
    Digital Laser RangefinderGLM 100 C
    Article number
    3 601 K72 7..
    Distance measurement
    Measuring range (max.)100 mA)
    Measuring range (typical)0.05 – 80 mB)
    Measuring range (typical under unfavourable conditions)45 mC)
    Measuring accuracy (typical)±1.5 mmB)
    Measuring accuracy (typical under unfavourable conditions)±2.5 mmC)
    Lowest indication unit0.1 mm
    Indirect Distance Measurement and Vial
    Measuring range–60° – +60°D)
    Grade measurement
    Measuring range0° –360° (4x90°)D)
    Measuring accuracy (typical)±0.2°E)/G)
    Lowest indication unit0.1 °
    General
    Operating temperature–10 °C...+50 °CF)
    Storage temperature–20 °C...+50 °C
    Allowable charging temperature range
    +5 °C...+40 °C
    Relative air humidity, max.
    90 %
    Laser class
    2
    Laser type
    635 nm, < 1 mW
    Laser beam diameter (at 25 ° C) approx.
    –at 10m distance
    –at 80m distance
    6mm
    48 mm
    Setting accuracy of the laser to the housing, approx.
    –Vertical
    – Horizontal
    ±2 mm/mG)
    ±10 mm/mG)
    Automatic switch-off after approx.
    –Laser
    – Measuring tool (without measurement)20 s
    5min
    Weight according to EPTA-Procedure 01/2003
    0.14 kg
    Dimensions
    51x111x30mm
    Degree of protection
    IP 54 (dust and splash water protected)
    Data transmission
    Bluetooth®Bluetooth® 4.0 (Classic and Low Energy) I)
    Micro USB cable
    – Charging voltage
    – Charging currentUSB 2.0
    5.0 V
    500 mA
    Battery
    Li-Ion
    Rated voltage
    3.7 V
    Capacity
    1.25 Ah
    Number of battery cells
    1
    Single measurements per battery charge, approx.
    25 000H)
    OBJ_BUCH-1956-002.book  Page 21  Monday, July 1, 2013  11:28 AM 
    						
    							22 | English 
    2 609 141 026 | (1.7.13)Bosch Power Tools
    Product Features
    The numbering of the product features shown refers to the il-
    lustration of the measuring tool on the graphic page.
    1Display
    2Measuring button
    3Button for grade measurement / calibration **
    4Button for clearing the internal memory / On/Off  **
    5Minus button
    6Button for result / timer function **
    7Button for measured-value list / storage of constant **
    8Button for function mode / basic settings **
    9Positioning pin
    10Button for selection of the reference level
    11Plus button
    12Button for length, area and volume measurement
    13Bluetooth® button
    14Cover, micro USB port
    15Micro USB port
    16Fixture for carrying strap
    17Reception lens
    18Laser beam outlet
    191/4" thread
    20Serial number
    21Laser warning label
    22QR-Code (product information)
    23Charge connector24Battery charger
    25Micro USB cable
    26Protective pouch
    27Measuring rail *
    , ***
    28Locking lever for measuring rail
    29Tripod*
    30Laser viewing glasses *
    31Laser target plate *
    * The accessories illustrated or described are not included as 
    standard delivery.
    ** Keep button pressed to call up the extended functions.
    ***When operating the measuring tool in the measuring rail 27, 
    data transmission is not possible.
    Display Elements
    aMeasured-value lines
    b “ERROR” indication
    cResult line
    dDigital vial / position of measured-value list entry
    eMeasured-value list indicator
    fMeasuring functions Battery Charger
    Article number2 609 120 4..
    Charging time
    approx. 3 h
    Output voltage
    5.0 V
    Charging current
    500 mA
    Protection class
    /II
    Digital Laser RangefinderGLM 100 C
    A) For measurements from the rear measuring-tool edge, the operating range increases the better the laser light is reflected from the surface of the 
    target (dispersive, not reflective) and the brighter the laser point is with respect to the ambient brightness (indoors, twilight). For distances greater 
    than 80 m, we recommend using a retroreflective target plate (accessory). For distances below 20 m, a retroreflective target plate should not be used, 
    as it can lead to measuring errors.
    B) For measurements from the rear measuring-tool edge, 100 % reflectance of the target (e .g., a white-painted wall), weak backlight and 25 ° C oper-
    ating temperature. Additionally, a deviation influence of  ± 0.05 mm/m must be taken into account.
    C) For measurements from the rear measuring-tool edge, 10 – 100 % reflectance of the target, strong backlight and – 10 ° C to + 50 ° C operating tem-
    perature. Additionally, a deviation influence of  ± 0.29 mm/m must be taken into account.
    D) For measurements with the rear side of the unit as reference, the max. measuring range is  ± 60  °  
    E) After calibration at 0 °  and 90 °  with an additional grade error of  ± 0.01 ° /degree to 45 °  (max.).
    F) In the continuous measurement function, the maximum operating temperature is + 40 ° C.
    G) At 25 ° C operating temperature
    H) For a new and charged battery without display illumination, Bluetooth® and tone signal.
    I) For Bluetooth® low-energy-devices, establishing a connection may not be possible, depending on model and operating system. Bluetooth® devices 
    must support the SPP profile.
    Please observe the article number on the type plate of your battery charger. The trade names of individual battery chargers may vary.
    Please observe the article number on the type plate of your measuring tool. The trade names of the individual measuring tools may vary.
    The measuring tool can be clearly identified with the serial number 20 on the type plate.
    Length measurement
    Area/surface measurement
    Volume measurement
    Continuous measurement
    Indirect height measurement
    1
    OBJ_BUCH-1956-002.book  Page 22  Monday, July 1, 2013  11:28 AM 
    						
    All Bosch manuals Comments (0)