Bonitor Mp301 Fine Mini Projector User Guide

							 
  
MP301 User Guide    
						

							  
2 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP301  
   
User Guide Menu 
Overview 3 
Specifications  4 
Compatibility 5 
Operating Instructions 6-7 
Trouble Shooting  8 
Safety Statements 9 
  
    
						

							  
3 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP301  
 
Overview 
  
Bonitor  MP301  is  a  portable  mini  projector  powered  by  usb  port.  It  is  able  to 
project  images  shown  in  computer  display.  Typical  e xamples  are  desktop 
computer,  laptop,  netbook  and  umpc.  It  does  not  req uire  complicated  setup, 
just plugs and plays after installing a driver.
  
  
USB  Input 
Lamp 
Focus 
LED  Light   
						

							  
4 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP301  
Specifications 
 
Description Parameter 
Display Technology  LCOS 
Image Resolution  640 x 480 pixels 
Aspect Ratio  4 : 3 
Brightness  12 lumens 
Throw Ratio  1.62 
Projection Distance  140mm - infinite 
Image Size  86.4mm - infinite / 3.4” - infinite 
Light Source  LED 
LED Lifetime  >30,000 hours 
Inputs  VGA, DC Power 
Input Resolution  VGA, SVGA, XGA, WXGA, WSXGA 
Dimension  62 x 90 x 20 mm 
Weight  80 grams 
Tripod Socket  ¼ – 20 
Operating Temperature  10
 - 27
C / 50
 - 80
F 
  
    
						

							  
5 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP301  
 
Operating Instructions 
 
  
Functioning MP301 
 
1. Connecting a computer  
Connect MP301 and a computer with the included USB  cable.   
  
2. Installing a driver  
Browse 
www.bonitor.com/support/  to  download  the  latest  driver  for  MP301. 
Install the driver according to the instruction in  the unzipped folder. 
  
3. Functioning MP301  
After  successful  driver  installation,  MP301  should  be  functioning  itself  without 
going any further step. A projector icon should be  added to the tool bar at the 
right  bottom  of  the  screen.  Mouse  over  and  right  cl ick  to  adjust  the  projecting 
mode.    
Image Size 
Distance  between  MP301  and  the  display  decides  the  image  size.  The 
following table gives a quick reference for the rel ationship. 
 
Distance Image Size 
5.5 Inch  3.4 Inch 
16 Inch  9.9 Inch 
32 Inch  19.8 Inch 
80 Inch  49.4 Inch 
118 Inch  72.8 Inch 
         
						

							  
6 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP301  
   
Mode
 
Styles of the projected images can be adjusted by s witching projection mode. 
Locate  the  projector  icon  at  the  right  bottom  of  th e  screen.  Mouse  over  and 
right click.  
Mode Description 
Off  Turn off the projector 
Mirror  Computer  screen  is  enabled.  Under  VGA  resolution,  MP301  can  project  everything  
shown on the screen. Under higher resolutions, 
MP301  only  shows  images  around  the  mouse 
pointer.   
Primary  Computer  screen  is  disabled.  Projected  imag e 
is adjusted to VGA resolution. 
Extended  Projected  image  is  split  from  the  screen.  Drag 
the file beyond the right hand side of the screen  
and the dragged file will be projected.     
   
Focus Adjustment  
Rotate the focus wheel until the projected image is  satisfactory. 
  
    
						

							  
7 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP301  
 
Trouble Shooting 
   
Situations Problems and Solutions 
No Projection  1.  Driver uninstalled  Install proper driver for MP301  
2.  Projection mode off 
Right click the projector icon and enable 
3.  USB connection 
Reconnect the USB cable 
Blurred Image  1.  Not focused Rotate  the  focus  wheel  until  the  projected  image  is  
satisfactory  
2.  Out of range 
Place MP301 within the distance range 
  
    
						

							  
8 | Bonitor All Rights Reserved. 
 
 
BONITOR M ini Projector  
MP301  
 
Safety Statements 
 
CE Statement 
  
This  product  is  herewith  confirmed  to  comply  with  a pplicable  directive 
2004/108/EC Electromagnetic Compatibility (as amend ed) in accordance with 
European Union Rules.  
The equipment was passed. The test was performed ac cording to the following 
applicable standards: 
EMC 
EN 55022: 2006 
EN55024: 1998+A1: 2001+A2: 2003 
EN61000-3-2: 2006 
EN61000-3-3: 1995+A1: 2001+A2: 2005  
FCC Statement Class B 
 
This equipment has been tested and found to comply  with the limits for a class 
B  digital  device,  pursuant  to  Part  15  of  the  FCC  ru les.  These  limits  are 
designed  to  provide  reasonable  protection  against  h armful  interference  in  a 
residential  installation.  This  equipment  generates  uses  and  can  radiate  radio 
frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the 
instructions,  may  cause  harmful  interference  to  rad io  communications. 
However,  there  is  no  guarantee  that  interference  wi ll  not  occur  in  a  particular 
installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or 
television reception, which can be determined by tu rning the equipment off and 
on, the user is encouraged to try to correct the in terference by one or more of 
the following measures:  
- Reorient or relocate the receiving antenna 
- Increase the separation between the equipment and  receiver 
- Connect the equipment to an outlet on a circuit d ifferent from that to which the 
receiver is connected 
- Consult the dealer or an experienced radio/TV tec hnician for help