Blackberry Priv 5 1 User Guide

							that contains an NFC tag. Features including Android
`
 Beam, Tap and Pay, and Tap and Go use NFC to transfer
information between devices.
Shared Internet connections
You can use your device
						

							Mobile networkA mobile network connection allows your device to make calls and, if you have a data plan, use data services such as
Internet browsing. In some locations, such as in a hospital or on an airplane, you might need to turn 
o
						

							Change the APN settings for your default Internet connection
Your device uses Access Point Name (APN) settings to open a data connection with your service provider
						

							3. If necessary, turn on the switch.4.Tap  > Saved networks .
5. Tap a network.
6. Tap  Forget.
View saved Wi-Fi networks When you connect your device to a Wi-Fi network, your device automatically saves the information required to connect tothe network. When you are within range of a saved Wi-Fi network, your device automatically tries to connect to it. This is
useful when you frequently move between Wi-Fi networks, such as your home Wi-Fi network and the Wi-Fi network at work.
1. Swipe down from the top of the screen once using two 
fingers, or twice using one finger.
2.Tap  >  Wi-Fi .
3. If necessary, turn on the switch.
4.Tap  > Saved networks .
Write Wi-Fi connection information to an NFC tag
Turn on NFC on your device.
By writing Wi-Fi connection information to an NFC tag, you can allow others to connect to a password-protected Wi-Fi network with a simple tap of a device. This is helpful, for example, if you want to let guests use your home Wi-Fi network when they visit.
If the Wi-Fi network requires a username and password, for example, a Wi-Fi network at work, you can
						

							1. Swipe down from the top of the screen once using two fingers, or twice using one finger.2.Tap  > Wi-Fi .
3. If necessary, turn on the switch.
4. Tap and hold a network.
5. Tap  Modify network .
6. Select the  Advanced options  checkbox.
7. In the  IP settings drop-down list, tap  Static.
8. Change the IP address 
fields.
9. Tap  Save.
Change advanced settings for your Wi-Fi connections You can change advanced settings for your Wi-Fi connections. For example, you can set whether your Wi-Fi connectionremains active when your device sleeps and you can change the Wi-Fi frequency band. You can also 
find the Media Access
Control (MAC) address and IP address for your device.
1. Swipe down from the top of the screen once using two 
fingers, or twice using one finger.
2.Tap  >  Wi-Fi .
3. If necessary, turn on the switch.
4.Tap  > Advanced .
Advanced Wi-Fi connection settings
SettingDescriptionNetwork notificationTurn on this switch to receive a notification when your device is within range of a
public Wi-Fi network.Scanning always availableTurn on this switch to allow location services and apps to scan for Wi-Fi networks even when Wi-Fi is turned 
o
						

							SettingDescriptionInstall certificatesTap this option to install digital certificates that can identify your device when,
for example, your device connects to VPN or a Wi-Fi network.Wi-Fi DirectTap this option to connect with available Wi-Fi Direct compatible devices.WPS Push ButtonTap this option to turn on the Wi-Fi Protected Setup feature.WPS PIN EntryTap this option to enter the PIN for the Wi-Fi Protected Setup feature.
Troubleshooting: Wi-Fi connections
I can