Home > Black and Decker > Power Tools > Black And Decker Workmate 425 Type 5 Manual

Black And Decker Workmate 425 Type 5 Manual

Add to Favourites
    Download as PDF

    View the Black And Decker Workmate 425 Type 5 Manual for free. All the Black and Decker manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 INSTALLING THE MIDDLE JAW 11. With front jaw cranked to the front of the work center, insert the indexing lugs of the middle jaw into the front keyholes. Rear jaw is then installed in the back keyholes. Turn crank handle clockwise to tighten. (Fig 10) SWIVEL PEGS 12. The four supplied swivel pegs can be used in any of the holes in the front and rear jaws. The pegs are used to extend the size of your Workmate’s holding capacity. (Fig 11) WARNING: Read and understand all instructions.Failure to follow...
    Page 2 AVERTISSEMENT : Assurez-vous de lire et de comprendre toutes les directives. Négliger de suivre toutes les directives de sécurité figurant ci-après peut entraîner des blessures corporelles graves. 1.Ne jamais placer une charge supérieure à 550 lb sur l’étau-établi. 2.Ne jamais placer sur l’étau-établi une charge mal équilibrée qui pourrait le faire basculer. 3.Ne jamais se servir de l’étau-établi comme marchepied ni comme plate-forme. Ne pas monter sur la plate-forme inférieure lorsque l’étau-établi est...
    Start reading Black And Decker Workmate 425 Type 5 Manual
    All Black and Decker manuals