Bissell Quicksteamer 1950 W Manual

							Safety Instructions
Product view
Assembly
Operations / Special Tools
QuickSteamer
™
USER’S GUIDE
1950 SERIES
3
4
5
6-8
Routine Maintenance9
Troubleshooting10
Warranty 12
Replacement Parts11
Consumer Services 10 
						

							Thanks for buying a BISSELL QuickSteamer™
We’re glad you purchased a BISSELL®QuickSteamer™Lightweight
Deep Cleaner. Everything we know about floor care went into the design
and construction of this complete, high-tech deep cleaning system.
Your QuickSteamer
™is well made, and we back it with a full one-year
warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Service department, so, should you ever have a 
problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today,
BISSELL is a global leader in the design, manufacture, and service of high
quality homecare products like your QuickSteamer.
™
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer 
						

							IMPORTANT SAFETY INSTRUCTIONS
Use only manufacturer’s recommended
attachments.
Use only cleaning products formulated by 
BISSELL for use in this appliance.
Keep openings free of dust, lint, hair, etc.
Keep appliance on a level surface.
Turn off all controls before unplugging.
Unplug by grasping the plug, not the cord.
Be extra careful when cleaning stairs.
Pay close attention when working 
around children.
SAVE THESE INSTRUCTIONS.
GROUNDING INSTRUCTIONS.
This appliance must be connected to a
grounded wiring system. If it should 
malfunction or break down, grounding 
provides a safe path of least resistance for
electrical current, reducing the risk of 
electrical shock. The cord for this appliance
has an equipment-grounding conductor and
a grounding plug. It must only be plugged
into an outlet that is properly installed and
grounded in accordance with all local codes
and ordinances.
WARNING: Improper connection
of the equipment-grounding conductor
can result in a risk of electrical shock.
Check with a qualified electrician or 
service person if you aren’t sure if the outlet
is properly grounded. DO NOT MODIFY THE
PLUG. If it will not fit the outlet, have a 
proper outlet installed by a qualified 
electrician. This appliance is designed for
use on a nominal 120-volt circuit, and has a
grounding attachment plug that looks like
the plug in the drawing above. Make certain
that the appliance is connected to an outlet
having the same configuration as the plug.
No plug adapter should be used with 
this appliance.
This model is for household use only.
WARNING:  When using an
electrical appliance, basic precautions
should be observed, including the following:
Readall
instructions beforeusing your 
QUICKSTEAMER.™Use only on surfaces
moistened by cleaning process.Always 
connect to a properly grounded outlet.
Unplug from outlet when not in use 
and before conducting maintenance 
or troubleshooting. 
To reduce the risk of fire, electric shock 
or injury:
Do not expose to rain, store indoors.
Do not leave QUICKSTEAMER™when it is
plugged in.
Do not service QUICKSTEAMER™when it is
plugged in.
Do not use with damaged cord or plug.
Do not use QUICKSTEAMER™if it has been
dropped, damaged, left outdoors or
dropped into water, have it repaired at an
Authorized  Service Center.
Do not pull or carry by cord, use cord as a 
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
Do not carry the appliance while in use.
Do not handle QUICKSTEAMER™plug or 
appliance with wet hands.
Do not put any object into appliance openings,
use with blocked opening, or restrict air flow.
Do not expose hair, loose clothing, fingers
or body parts to openings or moving parts.
Do not pick up hot or burning objects.
Do not pick up flammable or combustible
materials (lighter fluid, gasoline, kerosene,
etc.) or use in the presence of explosive 
liquids or vapor.
Do not use appliance in an enclosed space
filled with vapors given off by oil base
paint, paint thinner, some moth proofing
substances, flammable dust, or other
explosive or toxic vapors.
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
Do not modify the 3-prong grounded plug.
Do not allow to be used as a toy.
Do not use for any purpose other than
described in this User’s Guide.
Grounded
Outlets
Grounding Pin 
						

							1.
2.
Handle
Assembly Spray
Trigger
Power 
Switch
Dirty
Water
Tank
Floor
Nozzle Vent Cover
Containing
Foam Filter
Spray Bar
Lower
Body Clean
Water
Tank
Lower
Cord
WrapPhillips
Head
Screw
Quick Release 
Cord Wrap
Power Cord
Large,
Easy
Rolling
WheelsDetent
Lever 
						

							How To Put It Together
Other Components
How to use this guide
This User’s Guide has been designed 
to help you get the utmost satisfaction from 
your BISSELL QuickSteamer Lightweight Deep
Cleaner. You’ll find assembly and operating 
instructions, safety precautions, as well as 
maintenance and troubleshooting instructions.
Please read this Guide thoroughly before 
assembling your cleaner.
Pay particular attention to the product 
diagram, assembly instructions, and part names.
Locate and organize all parts before assembly.
Familiarize yourself with the parts and where they
go. Following this User’s Guide will greatly
enhance your ability to get the most performance
from your BISSELL QuickSteamer for many years.
Your QuickSteamer comes in two, easy to
assemble components.
Detachable Handle
Lower Body
Clean Water Tank - holds 1/2-gallon of hot water
cleaning solution.
Dirty Water Tank - holds 1/2-gallon of dirty water.
Power Cord - Secure Power Cord around upper and
Lower Cord Wraps, and secure Plug to Cord with
molded clip Your QuickSteamer is packaged as two primary
components - the Lower Body and the Handle
Assembly. Select QuickSteamer models also come
with a Bare Floor Tool.
Your QuickSteamer assembles easily in two quick
steps.The only tool you’ll need to assemble your
cleaner is a Phillips head          screwdriver.
Refer to Assembly Diagram on page 4
Attach Handle to Lower Body
Slide Handle Assembly (with attached
Quick Release Cord Wrap™) down into
Lower Body until it will go no further.
Secure with screw
Secure by placing one (1) Phillips head
screw (supplied) into rear of Handle
Assembly. Tighten with screwdriver 
until secure.
1.
2.
1.
2. 
						

							Plan activities to give carpet time to dry.
Remove easily moved furniture (chairs, lamps,
coffee/cocktail tables, etc.) from room if needed.
Vacuum carpet thoroughly.
Decide where to begin — and end — your job. Clean
in 3’ X 4’ sections, starting in areas farthest from exit.
Plan to leave a path open to empty soiled water and
refill cleaner.
Carpeting will dry in three to four hours, depending on
carpet style and air circulation in room. A floor fan
speeds drying.
Replace furniture on damp carpeting by placing waxed
paper under legs until floor dries completely.
Remove the Clean Water Tank by lifting it straight up,
then away from the Lower Body.
Using the Formula Measuring Cap, add two (2) capfuls
of BISSELL
®Fiber Cleansing Formula™to the Clean
Water Tank. Add 1/2-gallon of hot (NOT boiling) tap
water. Fill only to fill line – do not overfill.
Replace & turn Formula Measuring Cap clockwise until
secure.
Place Clean Water Tank on Body.
Rotate Quick Release Cord Wrap
™and plug in.
Turn Power Switch [back of Lower Body] to (    ) ON.
If cleaner starts when first plugged in, switch cleaner 
OFF (    ) until ready for use.
How to use your BISSELL QuickSteamer
How to begin
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
Getting ready
WARNING:Use only BISSELL Fiber
Cleansing Formula™or 
Floor Cleansing Formula™ 
in your QuickSteamer.™
Use of cleaning formulas 
that contain lemon or 
pine oil may damage this
appliance and void warranty.
Chemical spot cleaners or
solvent-based soil removers
should not be used. These
products may react with the
plastic materials used in 
your QuickSteamer,
™
causing cracking or pitting.
Formula
Measuring
Cap
Unscrew to Remove
Power
Switch
Tip:
Always vacuum
thoroughly before
you deep clean.
If possible, move
larger furniture to
an area you will 
not be cleaning.
1.
6. 
						

							Pre-Treating (Optional)
Pre-treat stubborn stains and highly soiled carpet in 
hallways and other high-traffic areas.
Spray soiled area with BISSELL
®Tough Stain PreCleaner.™
Use a stiff-bristled brush to work formula into carpet pile.
Wait 3 -5 minutes before deep cleaning.
Turn Power Switch [back of Lower Body] to (    ) ON.
With foot, press the Detent Pedal on right side of Lower Body.
Depress Trigger to spray cleaning solution. Do not overwet.
Repeat motion over same area without depressing Trigger.
Repeat Steps 3 and 4 until no more dirt can be removed.
Continue to clean entire carpet, working in 3’ x 4’ sections.
Empty the Dirty Water Tank when dirty water reaches the full
line, or when the Clean Water Tank is empty.
If Floor Nozzle stops spraying, turn Power Switch to 
OFF (     ) and check water and cleaning solution levels.
Refill if needed.
1.
2.
3.
Attaching the Bare Floor Tool
Deep Cleaning
1.
2.
4.
3.
5.
6.
7.
8.
Tip:
Deep cleaning
spots, spills 
and high traffic
areas on a 
regular basis can
prolong 
carpet life.
Tip:
Deep cleaning
carpeting 
regularly can
reduce dust 
and allergens 
in your home.
*Available with select models only. If your QuickSteamer did not
come so equipped,you may call BISSELL Consumer Services
at 1-800-237-7691 to order one. You can also visit the BIS-
SELL website: www.bissell.com.
NOTE: Your QuickSteamer is not recommended for cleaning
wood floors.
• Use only BISSELL
®Floor Cleansing Formula™on no-wax
floors. Never use BISSELL Fiber Cleansing Formula™or other
carpet cleaners on bare floors.
• Sweep or vacuum before starting.
• Remove old wax before cleaning.
• Leave an exit path for yourself.
• Allow at least 1/2 hour drying time.
Bare Floor Tool
(select models only)
Dirty Water Tank
7. 
						

							Attaching the Bare Floor Tool Continued*
Cleaning Bare Floors
*Available with select models only.
Remove Dirty Water Tank.
Remove Brush by depressing tabs on the Cross Action
™Brush
outward with thumbs until the Brush loosens.
Add Bare Floor Tool underneath the Floor Nozzle by sliding
notches and tabs into the opening until it is secure. Make sure
tabs on the Bare Floor Tool snap over front lip of 
Floor Nozzle.
Replace empty Dirty Water Tank.
Empty and rinse Clean Water Tank.
Using the Formula Measuring Cap, add two (2) capfuls of 
BISSELL
®Floor Cleansing Formula™to the Clean Water Tank.
Add 1/2-gallon of hot (NOT boiling) tap water. Fill only to fill
line – do not overfill.
Turn Formula Measuring Cap clockwise until secure.
Rotate Quick Release Cord Wrap
™and plug in.
Turn Power Switch [back of Lower Body] to (    ) ON.
Slowly move QuickSteamer back and forth over soiled surface
one time while depressing Trigger. Do not overwet.
Repeat motion over same area without depressing Trigger.
Repeat Steps 1 and 2 until no more dirt can be removed.
If Floor Nozzle stops spraying, turn Power Switch to 
OFF (     ) and check water and cleaning solution levels. Refill
if needed.
WARNING: The Dirty Water Tank
holds approximately 1/2
gallon of soiled liquid.
Filling past the fill line
can damage unit.
WARNING: Do not lay QuickSteamer
on its back with Clean
Water Tank in place. Do
not tip up foot with Dirty
Water Tank in place.
1.
2.
4.
3.
1.
2.
4.
3.
5.
6.
7.
8.
9.
Bare Floor Tool
Cross Action
™Brush
TabsFloor
nozzle
front lip 
						

							When you’re done
WARNING: 
Do not store unit where
freezing may occur.
Damage to internal 
components may result.
1.
2.
3.
6.
4.
5.
Turn Power Switch to OFF (     ) position.
Unplug Power Cord from outlet.
Remove and empty Dirty Water Tank.
a. Press detent Pedal and tip Handle back, laying it gently on floor.
b. Release Dirty Water Tank latches [1 each side] by pulling up from 
bottom of latch and then out.
c. Carefully lift Dirty Water Tank from Lower Body.
d. Carry Dirty Water Tank to a toilet or sink. To empty, pour out 
contents  using opening at back of Tank.
e. Fill Dirty Water Tank with clean water through the Vent Cover and 
rinse thoroughly. Discard water.
Replace Dirty Water Tank on Lower Body and secure 
with latches. Replace Clean Water Tank.
Wrap Power Cord around Quick Release Cord Wrap
™
on back of QUICKSTEAMER.™
Wipe all surfaces with a soft cloth. Store cleaner upright in a 
protected, dry area.
NOTE: You may have cleaning solution remaining in the Clean Water
Tank. You may store your QuickSteamer this way for the next cleaning
task, but never keep soiled solution in the Dirty Water Tank.
a.
b.
c.
d.
Vent 
Cover
e. 
						

							BISSELL Consumer Services
Troubleshooting
Reduced spray or no spray.
Possible Causes Remedies
Clean Water Tank empty Refill Tank with water and formula
Spray Bar clogged Clean Spray Bar
Deep Cleaner not picking up cleaning solution.
Possible Causes Remedies
Dirty Water Tank not aligned/secured Check Tank for proper alignment
and secure with side latches
Dirty Water Tank is full Empty Tank
WARNING: To reduce the risk of
fire, electric shock or
injury, unplug appli-
ance from outlet before
servicing.
For information about repairs or replacement parts, or questions about
your warranty, call:
BISSELL Consumer Services
1-800-237-7691 
Monday - Friday 8 a.m. — 7 p.m. EST
Saturday 9 a.m. — 2 p.m. EST
Or write:
BISSELL HOMECARE, INC
PO Box 3606
Grand Rapids  MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of
purchase in the event of a warranty claim. See About Your Warranty
on page 14 for details.