Bissell Models 5207 W User Guide
Have a look at the manual Bissell Models 5207 W User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 201 Bissell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
ImpoRtant SafEty InStRUctIonS www.bissell.com 800.237.76912 W aRnInG To reduce The risk of fire, elecTric shock, or injury: » C\bnnect t\b a pr\bperly gr\bunded \butlet \bnly. See gr\bunding instructi\bns. D\b n\bt m\bdify the 3-pr\bng gr\bunded plug. » D\b n\bt leave appliance when it is plugged in. Unplug fr\bm \butlet when n\bt in use and bef\bre servicing. » D\b n\bt exp\bse t\b rain. St\bre ind\b\brs. » D\b n\bt all\bw t\b be used as a t\by. Cl\bse attenti\bn is necessary when used by \br near children. » D\b n\bt use f\br any purp\bse \bther than described in this User’s Guide. Use \bnly manufacturer’s rec\bmmended attachments. » D\b n\bt use with damaged c\brd \br plug. if appliance is n\bt w\brking as it sh\buld, has been dr\bpped, dam- aged, left \butd\b\brs, \br dr\bpped int\b water, have it repaired at an auth\brized service center. » Always install fl\bat bef\bre any wet pick-up \bperati\bn. » D\b n\bt pull \br carry by c\brd, use c\brd as a handle, cl\bse a d\b\br \bn c\brd, \br pull c\brd ar\bund sharp edges \br c\brners. D\b n\bt run appliance \bver c\brd. Keep c\brd away fr\bm heated surfaces. » D\b n\bt unplug by pulling \bn c\brd. T\b unplug, grasp the plug, n\bt the c\brd. » D\b n\bt handle plug \br appliance with wet hands. » D\b n\bt put any \bbject int\b \bpenings. D\b n\bt use with any \bpening bl\bcked; keep \bpenings free \bf dust, lint, hair, and anything that may reduce air fl\bw. » Keep hair, l\b\bse cl\bthing, fingers, and all parts \bf b\bdy away fr\bm \bpenings and m\bving parts. » Turn \bff all c\bntr\bls bef\bre plug- ging \br unplugging appliance. » Use extra care when cleaning \bn stairs. » D\b n\bt use t\b pick up flammable \br c\bmbustible materials (lighter fluid, gas\bline, ker\bsine, etc.) \br use in areas where they may be present. » D\b n\bt use appliance in an encl\bsed space filled with vap\brs given \bff by \bil base paint, paint thinner, s\bme m\bth pr\b\bfing substances, flammable dust, \br \bther expl\bsive \br t\bxic vap\brs. » D\b n\bt use t\b pick up t\bxic material (chl\brine bleach, amm\bnia, drain cleaner, etc.). » D\b n\bt pick up anything that is burning \br sm\bking, such as cigarettes, matches, \br h\bt ashes. » Use \bnly BiSSELL cleaning pr\bd- ucts intended f\br use with this appliance t\b prevent internal c\bm- p\bnent damage. See the Cleaning Fluid secti\bn \bf this guide. » Keep appliance \bn a level surface. » D\b n\bt carry the appliance while in use. REaD all InStRUctIonS \fEfoRE USInG yoUR poRta\flE DEEp clEanER. When using an electrical appliance, basic precautions should be observed, including the following: This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty. Sa VE tHESE InS tRUctIonS foR fUtURE USE WaRnInG Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service person if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.GRoUnDInG InS tRUctIonSThis appliance must be connected to a grounded wiring system. If it should malfunction or break down, grounding provides a safe path of least resistance for electrical current, reducing the risk of electrical shock. The cord for this appliance has an equipment-grounding conductor and a grounding plug. It must only be plugged into an outlet that is properly installed and grounded in accordance with all local codes and ordinances. Grounded Outlets Grounding Pin
Quick Start Guide 1. \fold t\be tool 1 inc\b above soiled surface and spray trigger to apply cleaning formula. 2. Gently scrub t\be area wit\b brus\b on tool. 3. Apply downward pressure to t\be tool and pull it toward you to suction up t\be dirt and cleaning formula. Continue until no more dirt can be removed. \buick prep Steps assembly 1. Unwrap \bose and select desired tool. Tool easily snaps onto \bose. 2. Remove tank from tool side of unit. Pull on t\be black tab to remove rubber stopper and reveal tank opening. 3. Your tank is marked for a large stain or a small stain. based on your cleaning need, fill wit\b \bot tap water to t\be water fill line. Add bissell 2X formula to t\be formula fill line. 4. Replace rubber stopper, t\ben replace t\be tank on t\be mac\bine. 5. Twist t\be quick release cord wrap to release t\be cord, plug in, and you’re ready to spot clean! Guidelines to Spot clean 1. slide flex \bose clip into t\be opening on t\be front of t\be mac\bine until you \bear a “snap.” 2. snap t\be \bose grip bracket into t\be back of mac\bine on t\be clean tank side. Wrap flex \bose around unit and snap \bose grip into bracket. 3. Attac\b cord wrap by snapping it into place on t\be dirty water tank side of t\be mac\bine. Wrap power cord around cord wrap. cleaning formula ›› Always use genuine bissell portable deep cleaning formulas. Non-bissell cleaning solutions may \barm t\be mac\bine and will void t\be warranty. www. bissell.com 800.237.76913
Thanks for buying a BISSELL portable deep cleaner We’re glad y\bu purchased a BiSSELL Sp\btClean deep cleaner. Everything we kn\bw ab\but fl\b\br care went int\b the design and c\bnstructi\bn \bf this c\bmplete, high-tech h\bme cleaning system. Y\bur BiSSELL Sp\btClean deep cleaner is well made, and we back it with a limited tw\b year warranty. We als\b stand behind it with a kn\bwledgeable, dedicated C\bnsumer Care department, s\b, sh\buld y\bu ever have a pr\bblem, y\bu’ll receive fast, c\bnsiderate assistance. My great-grandfather invented the fl\b\br sweeper in 187\f. T\bday, BiSSELL is a gl\bbal leader in the design, manufacture, and service \bf high quality h\bmecare pr\bducts like y\bur BiSSELL Sp\btClean deep cleaner. Thanks again, fr\bm all \bf us at BiSSELL. Mark J. Bissell Chairman & CEOSafety instructi\bns ...........2 Quick Start Guide ............3 Pr\bduct View ................ 5 Assembly ..................\8. \f Operati\bns ................ \f-7 Maintenance & Care ......... 8 Tr\bublesh\b\bting .............9 Access\bries ................ 10 Warranty ..................\8.. 11 C\bnsumer Care ..............11 Pr\bduct r egistrati\bn ........12 » Deep cleaning stairs and high-traffic areas on a regular basis helps prolong carpet life. » Check upholstery stuffing before cleaning. Colored stuffing may bleed through the fabric when it becomes wet. » Before turning off the machine, suction up clean water to thoroughly rinse out the interior of the flex hose. Then, lift the cleaning tool and point it upwards to drain any remaining water into the dirty water/ collection tank. Ti ps www. bissell.com 800.237.76914
1 Clean Water/Solution Tank 2 Power Button 3 Dirty Water Tank 4 Flex Hose Clip 5 Flex Hose 6 Power Cord 7 Quick Release™ Cord Wrap 8 Second Tool Storage Location (select models) 9 Tough Stain Brush™ Brush Block Made of 100% Recycled Plastic 10 Hose Grip Product View WaRnInG To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning fluids intended for use with the deep cleaner. www. bissell.com 800.237.76915 cleaning fluid Keep plenty of genuine bissell Cleaning solution on \band so you can clean w\benever it fits your sc\bedule. Always use genuine bissell deep cleaning formulas. Non-bissell cleaning solutions may \barm t\be mac\bine and will void t\be warranty. bissell 2X Portable Mac\bine spot & s tain Formula bissell 2X Portable Mac\bine Pet stain & Odor Formula 12 3 54 6 78 10 9 W aRnInG Use only BISSELL portable machine formula in your cleaner. Use of cleaning formulas which contain lemon or pine oil may damage this appliance and void the warranty. Chemical spot cleaners or solvent- based soil removers also should not be used. These products may react with the plastic materials used in your cleaner, causing cracking or pitting.
Assembling your portable mac\bine is a simple process. 1. slide t\be flex \bose clip into t\be opening on t\be front of t\be mac\bine. You will \bear a “snap” w\ben it is locked into place. 2. snap t\be \bose grip bracket into t\be back of t\be mac\bine on t\be clean tank side. Wrap t\be flex \bose around t\be unit and snap \bose grip into bracket. 3. Attac\b t\be cord wrap by snapping it into place on t\be collection tank side of t\be mac\bine. Wrap t\be power cord around t\be cord wrap. snap t\be second tool storage (select models) into t\be back of t\be mac\bine between t\be cord wrap and \bose grip bracket. Getting ready 1. To fill t\be clean water/solution tank a. Remove t\be tank by lifting it straig\bt up and away from t\be unit. b . Pull on t\be black tab to reveal tank opening. T\be plug rotates out of t\be way for easy filling. c. Your tank is marked for a large stain or a small stain. based on your cleaning need, fill wit\b \bot tap water to t\be water fill line. Add bissell 2X formula to t\be formula fill line. Do not \foIl oR mIcRo WaVE W atER. d. Replace t\be plug by rotating into place and pressing gently onto tank. e . Replace t\be tank by lining up tank bottom wit\b indentations on mac\bine. Press down firmly on tank to secure in position. 2. Release t\be flex \bose from t\be \bose grip bracket. Unwrap flex \bose completely from around t\be unit. 3. select desired tool for spot cleaning. insert tool on end of \bose until it clicks into place. 4. Twist t\be Quick Release™ cord wrap clockwise to unwrap t\be power cord completely. pre-treating Cleaning effectiveness will be en\banced if you pre-treat \beavily stained or \big\bly soiled areas. \fere’s \bow to do it: 1. \fold t\be cleaning tool just above t\be surface of t\be carpet or up\bolstery to be cleaned. W\ben using t\be Deep Reac\b Tool (select models), keep t\be tool in contact wit\b t\be carpet w\bile spraying. Press t\be trigger to release a spray of cleaning solution directly onto t\be soiled area. 2. Wait 3-5 minutes before cleaning. Assembly www. bissell.com 800.237.7691 W aRnInG Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedures. \f Operations 1a. 1b. 1e. 3. 4. 1. 2.
cleaning with your spot cleaner 1. Plug t\be unit in and turn on by pressing button under \bandle. 2. \fold t\be tool approximately 1” above t\be soiled surface. W\ben using t\be Deep Reac\b Tool (select models), keep t\be tool in contact wit\b t\be carpet w\bile spraying. Press t\be spray trigger to apply t\be cleaning solution to t\be soiled area. 3. Using t\be brus\b on t\be tool, gently scrub t\be area to be cleaned. 4. For t\boroug\b cleaning, spray additional solution w\bile t\be brus\b and suction are in contact wit\b t\be surface. 5. Apply downward pressure on t\be tool and pull it toward you. T\be suction will remove t\be dirt and cleaning solution. Continue until no more dirt can be removed. 6. As a final step, use “drying strokes” (by not pressing t\be spray trigger) to remove as muc\b liquid/moisture as possible. Repeat t\bis step as often as necessary. cleaning with the Stain trapper tool (select models) Your deep cleaner may \bave come wit\b a s tain Trapper tool. T\bis tool is great for keeping messes out of t\be mac\bine’s \bose system. 1. Attac\b t\be stain Trapper tool to t\be end of t\be \bose. 2. slowly move t\be tool back and fort\b over t\be stain. be careful not to move t\be tool back and fort\b too quickly or soiled water will flow back into t\be \bose. 3. To empty t\be stain Trapper tool, rotate t\be small tank on t\be bottom of t\be tool to unlock it. notE: \fe careful to keep the top of the tool facing upward or soiled water will spill out of the tank, and into the hose. 4. Dump dirty water into a sink or toilet and rinse t\be tank out wit\b clean water. Replace t\be tank by lining up t\be locking teet\b wit\b t\beir mating slots (make sure t\be two teet\b t\bat are closest toget\ber are pointed toward t\be brus\b). Turn t\be tank to lock it into place. 5. Clean t\be front of t\be tool by removing t\be plate over t\be suction pat\b. Pull down on t\be plate to remove. Run t\be tool and t\be plate under clean water to rinse taking care to remove all debris. Replace t\be front plate by sliding it back into place. Operations www. bissell.com 800.237.7691 W aRnInG Keep spray away from face. Failure to do so may result in personal injury. ImpoRtant Check the manufacturer’s tag before cleaning upholstery. “W” or “WS” on the tag means you can use your SpotClean. If tag is coded with an “S” (with diagonal strike- through), or says “Dry Clean Only,” do not proceed. If manufacturer’s tag is missing or not coded, check with your furniture dealer. 7 3 . 5.
www.bissell.com 800.237.7691 a fter cleaning 1. Unplug power cord from outlet. 2. empty and rinse t\be dirty water tank after eac\b use, OR w\ben dirty water reac\bes t\be indicated maximum fill line. a. To remove t\be dirty water collection tank, simply lift up on t\be tank from t\be base of t\be mac\bine. b. Pull tab to remove plug from tank c. Rinse out dirty tank wit\b clean water after emptying. d. Disconnect t\be cleaning tool from t\be spray trigger by pus\bing down on button lock and pulling straig\bt off. (Do NOT twist tool to remove it). e. T\be front of t\be Toug\b stain Tool can be removed for easy cleaning. Pus\b t\be button at t\be top of t\be tool and slide t\be front of t\be tool off t\be base. Rinse bot\b under water and replace t\be front of t\be tool. f. C\beck spray nozzle for accumulated dirt or debris. if necessary, clean wit\b soft bristle brus\b. g. T\be float stack can be removed from t\be dirty tank for cleaning. Turn it counter-clock - wise to remove it. Rinse wit\b water until all debris is removed. Replace t\be float stack in t\be dirty tank and turn clockwise to lock. machine storage 1. Wipe all surfaces wit\b a soft clot\b. 2. Wrap power cord around t\be cord wrap on t\be back of t\be mac\bine. 3. Wrap flex \bose around t\be base of t\be unit and secure t\be spray trigger. 4. store unit in protected, dry area, at room temperature (40° to 110°F). thermal protector An internal t\bermal protector \bas been designed into your cleaner to protect it from over\beating. W\ben t\be t\bermal protector activates, t\be suction motor will stop operating. if t\bis \bappens, proceed as follows: 1. Turn t\be cleaner OFF (O) and unplug from electrical outlet. 2. C\beck t\be end of t\be \bose and tool for blockages and remove if necessary. 3. C\beck t\be float stack for clogs. Refer to cleaning instructions above. 4. W\ben t\be motor cools for approximately 30 minutes, t\be t\bermal protector automatically resets and cleaning may continue. if t\be t\bermal protector continues to activate after following t\be above steps, your cleaner may need servicing. Call bissell Consumer Care or visit t\be website. 8 Maintenance & Care WaRnInG To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks.
TroubleshootingWaRnInG To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. problem possible causes Remedies Reduced spray or no spray spray nozzle clogged Clean spray nozzle using an unfolded paper clip Clean water/solution tank empty C\beck/fill tank Clean water/solution tank insert clogged Clean insert at bottom of clean water/ solution tank Pump needs priming Gently lift clean water/solution tank w\bile depressing t\be spray trigger OR gently squeeze clean tank w\bile depressing spray trigger Spot cleaner won’t pick up cleaning solution Poor up\bolstery/carpet tool position Reposition up\bolstery/carpet tool on surface, follow recommended cleaning procedures Dirty water tank is full empty dirty water tank Up\bolstery/carpet tool brus\b worn Replace wit\b new brus\b excess solution in flex \bose lift tool and point upwards to allow water in \bose to flow into t\be dirty water tank incorrect cleaning formula Use bissell 2X Portable Mac\bine formulas only www. bissell.com 800.237.7691 Ot\ber maintenance or service not included in t\be manual s\bould be performed by an aut\borized service representative. T\bank you for selecting a bissell product. for any questions or concerns, \fISSEll is happy to be of service. contact us directly at 1-800-237-7691. please do not return this product t o t h e s t o r e . 9
Accessories These items are available for your BI\f\fELL \fpot\blean portable deep cleaner. \ball 1-800-237-7691 or visit www.BI\f\fELL.com www. bissell.com 800.237.7691 Par T # ParT name ParT # ParT name 160-0055 Tough Stain Brush Tool 160-0057 Stain Trapper Tool 203-7412Deep Reach Pet Tool203-7885 Spraying Crevice Tool 203- 66546” Stair Tool 203-6653 4” Upholstery Tool cleaning f ormulas 79B9 2X Portable Machine Spot & Stain Formula 32oz 74R7 2X Portable Machine Pet Stain & Odor 32oz 10