Bissell Model 94y2-2 Manual

							www.bissell.com 800.237.769111
Operations
Portable spot cleaning mode
Preparing the machine
1. step on the portable spot cleaning pedal   
to release the portable spot cleaner.  
2.  Release flex hose by twisting the hose 
secure latch clockwise. unwrap flex 
hose completely. 
3.  attach the desired tool to the hose grip 
until it snaps together. make certain the 
tool is securely attached. 
4.  twist the Quick Release cord wrap clock-
wise to unwrap the power cord com-
pletely and plug into grounded outlet.
Filling tank
1.  follow the instructions for filling the tank 
in the upright cleaning mode section on 
page 8.
Cleaning with Tools:
ImPORTANT! If using to clean uphol-
stery, check upholstery tags. Check 
manufacturer’s tag before cleaning. 
“W” or “WS” on the tag means you 
can use your Lift off Deep Cleaner if 
the tag is coded with an “X” or an 
“S”(with a diagonal stripe through it), 
or says “Dry Clean Only”, do not pro-
ceed with any deep cleaning machine. 
Do not use on velvet or silk. If manu-
facturer’s tag is missing or not coded, 
check with your furniture dealer.”)
1. hold the tool approximately 1" above 
the soiled surface. Press the spray  
trigger to apply the cleaning solution  
to the soiled area. 
 
Note: Hold end of hose below the 
tank water level to help prime the 
portable spot cleaner.
2.  using the brush on the tool, gently scrub   
the area to be cleaned. 
3.  apply downward pressure on the tool and 
pull it toward you. the suction will remove 
the dirt and cleaning solution. continue until 
no more dirt can be removed. 
Adsdfdd  ghg bvh
cvbbj  jkn hnbj  jkvh
gcghh jj  jhffhl kl lgh
Manufacturer’s tag
Check for colorfastness in an 
inconspicuous place. If pos-
sible, check upholstery stuffing. 
Colored stuffing may bleed 
through fabric  
						

							Operations 
12
Cleaning with Deep Reach™ Tool
1.  set tool on soiled surfaces and press the   
trigger to spray solution onto the soiled   
area to be cleaned. 
2.  slowly move the tool back and forth   
over the soiled surface, keeping the tool   
in contact with the carpet. 
Release trigger and move tool slowly 
over the soiled area to suction up  
water and dirt. 
4. continue to clean the area, working  
in small sections, until no more dirt  
can be removed.
Empty dirty tank
Follow the instructions under Empty 
dirty tank section on page 9 of the 
Upright cleaning mode section. 
Replacing portable machine on base
1.  align the product as the graphic shows, 
with the cord side on the left and hose 
side on the right. 
2.  Push down the portable spot cleaner 
until you hear it click securely into 
place. t est the fit by pulling up on the 
carry handle to make sure it is secure.
Cleaning portable machine 
1.  Remove and rinse the tools in clean,  
running water. dry and replace in the 
tool storage provided.
2.   it is recommended that you suction clean 
water from a bowl to rinse out the hose. 
then lift end of hose and stretch out to 
ensure all water is cleared from hose. 
3.  coil flex hose around the hose wrap 
and secure with latch.
4.  check suction gate and if it appears 
dirty, follow steps 1-4 under cleaning 
suction gate on page 13.
1.
3.
Portable spot cleaning mode continued
Graphic
1.  
						

							www.bissell.com 800.237.769113
Maintenance and care  
machine care (check regularly)
Cleaning suction gate
The suction gate automatically diverts 
air when the portable deep cleaner   
is detached. This should be checked   
and cleaned regularly for any dirt   
and debris.
1.  step on the pedal and remove   
the portable spot cleaner. Remove 
dirty tank.
2.  Remove two screws and pull off   
suction gate door.
3.  Wipe suction gate clean and rinse  
suction gate door.
4.  Replace suction gate door and  
two screws.
Cleaning spray tips
1. step on the pedal and remove the 
portable spot cleaner. t o remove,  
push in tab and pull it out. 
2.  clean by rinsing under hot water. 
3.  Replace by snapping back in. 
4.  Repeat steps on second spray tip.
Cleaning solution filter
1. step on the pedal and remove the   
portable spot cleaner. Remove the   
red solution filter cap on the base   
of the machine by inserting a coin   
or a flat head screw driver into the 
slot on the top. 
2.  turn counter clockwise to unscrew.  
set aside.
3.  Remove the white filter by the post. 
Rinse the filter under water.
4.  Replace the white filter back into the 
filter area. 
Note: make sure the white filter is 
seated properly before replacing   
the red solution filter cap.
5.  Replace the red solution filter cap and 
turn clockwise to tighten.
Solution  
Filter CapSuction 
Gate
Filter
2.
3.
5.
Spray 
Tips
1. 2.
WARNING:
  t o reduce the risk of fire, elec-
tric shock, or injury, turn power   
off and disconnect plug   
from electrical outlet before 
performing maintenance or 
troubleshooting.  
						

							www.bissell.com 800.237.7691
Maintenance and care  
14
Occasional replacement of one or 
both belts may become necessary. 
If that is needed, please follow the 
instructions below.
1.  turn off the machine, and unplug it from   
the outlet. Remove portable spot cleaner.
2.  Remove the nozzle by unscrewing three 
screws on the nozzle cover.
3.  turn the machine on its side.  
ImPORTANT: with portable spot 
cleaning pedal facing down.
4.  Remove end cap by unscrewing the 
3 screws. t ake care not to drop the 
screws into the unit.
5.  Remove 1 silver screw from the  
pivot arm.
6.  Remove pivot arm by gently lifting up.
7.  Remove small brush belt.
8.  Replace small brush belt, and reverse   
steps above.
9.  manually rotate brushes by hand to   
make sure they move freely. may notice   
a slight  resistance from the motor.
2.
4.
6. 8.
Small belt removal and replacement (as needed)
7.
5.
WARNING:  t o reduce the risk of fire, 
electric shock or injury, 
unplug from the outlet 
before servicing.  
						

							www.bissell.com 800.237.769115
Maintenance and care  
 
Brushes can be removed for cleaning 
or replacement as needed. 
1. follow small belt removal instructions on   
page 14 items 1-7.
2.  Remove brush rolls by pulling them off 
of the metal rods. Be careful not to 
lose the small washer at each 
end of the brush rolls.
3.  Re-attach the large belt to the grooves 
on the end of the new brush rolls. if  
the belt is damaged, replace with a 
new belt.
4.  Place cleaned or new brush rolls back 
onto the rods. make sure one washer is 
on each end of the rollers prior to sliding 
onto the rod. be sure the brush is seated 
completely on the rod.
5.  Replace small belt over grooves in  
back roller and metal cog.
6.  Replace pivot arm and secure with  
silver screw.
7.  Re-attach end cap by tightening with  
the (3) black screws.
8.  Return front nozzle to front of unit, by 
latching from underneath and then 
securing with 3 screws.
9.  follow step number 8 & 9 on page 14.
  if you have any questions or are having   
trouble installing or replacing your 
belt(s) or brushes, please call  
BISSELL Consumer Services.
2.
4.
6.
8. 3.
5.
7.
Brush removal and large belt replacement (as needed)
WARNING:
  t o reduce the risk of fire, 
electric shock or injury, 
unplug from the outlet 
before servicing.  
						

							www.bissell.com 800.237.7691
Troubleshooting 
16Built-in heater ready light does not illuminate
Possible causes 
Remedies
1.  The power is not turned ON    1.  The power must be ON to activate the heater ready light
2.   The portable spot cleaner is not attached completely  2.  Make sure the portable spot cleaner is attached   
    Push down firmly to check
Reduced Spray or No Spray
Possible causes  Remedies
1.  Formula & water tank may be empty  1.  Refill tank
2.  Formula & water tank may not be seated completely  2. Turn power OFF. Remove and reseat tank
3.  Pump may have lost prime in portable spot cleaning mode  3. Hold end of hose below water level in tank to prime
4.   The portable spot cleaner is not attached completely  4.  Push down firmly to check connection
5.   Solution filter may be clogged   5.  Follow steps under cleaning filter on page 13
DirtLifter® PowerBrush does not turn
Possible causes  Remedies
1.  The portable spot cleaner is not attached completely  1.  Make sure the portable spot cleaner is attached.   
    Push down firmly to check
2.   The unit is in the upright position  2.  Brushes only rotate when unit is reclined using the   
    recline  pedal
3.  Circuit breaker on machine (if equipped)  may have tripped  
3.  Turn the machine OFF and unplug from outlet. Check   
    to see if foreign object is caught in brush roll. Remove   
    object. Plug machine in to reset circuit breaker
4.  The belt is off or broken  4. Turn power OFF and unplug unit from outlet. Follow   
    instructions on pages 14 and 15
Loss of suction power
Possible causes  Remedies
1.  Tanks may not be seated properly  1.  Pick up both tanks and reseat them so it they fit snugly on   
    the  unit 
2.   Nozzles may not be assembled properly  2.  Unplug the unit. Check to make sure the "lip" of the   
    nozzle is securely hooked into the groove on bottom of   
    Tank (see page 10)
3.   The portable spot cleaner is not attached completely  3.  Make sure the portable spot cleaner is attached.   
    Push down firmly to check
4.   Dirty tank has picked up maximum amount of  4.  Empty dirty tank   
  dirty water and has reached full line    
5.   Formula & water tank is empty   5.  Check fluid levels in formula & water tank 
6.  Suction Gate is open.  6. Check to make sure the suction gate is closed. Follow   
    “Cleaning Suction Gate” instructions on page 13.
Other maintenance or service not included in the manual should be   
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.             
For any questions or concerns, BISSELL is happy to be of 
service. Contact us directly at 1-800-237-7691.  
						

							www.bissell.com 800.237.769117
Accessories - BISSELL deep cleaner
Item Part No.  Part Name 1 203-6651  3” tough stain t ool
 2  203-6652  Powered turbobrush® hand tool
 3  203-6653  4” upholstery t ool
 4  203-6654  6” stair tool
 5  203-7885  spraying crevice t ool 
 6   203-7412   deep Reach Pet t ool
 7   62e5-2   2X fiber cleansing formula with scotchgard
™ Protection 60 oz. 
 8   99K5-2 2X Pet stain and odor formula with scotchgard™ Protection 60 oz. 
  9   8 9 Q 5 - 2  2X allergen cleansing formula 60 oz.  
1 0   8 3 P 3 - 2  2X natural orange formula 60 oz.  
1 1   3 4b5 - 2   2X lavender essence formula 60 oz.  
1 2   7 8h6 - 3   2X Professional deep cleaning formula with scotchgard
™ Protection 48 oz.  
13  26V2  2X spring breeze formula 60oz.
14  0790  Pet stain and odor Remover
™  16 oz.
15  4001  t ough stain Precleaner  
22 oz.   
16  310-3040  mesh bag
*not all parts are included with every model.
1
6
11
16  2
7
12
3
8
134
9
145
10
15  
						

							www.bissell.com 800.237.769118
Replacement parts – BISSELL deep cleaner
Below please find a list of common replacement parts. While not all of these 
parts may have come with your specific machine, all are available to you fo\
r 
purchase, if desired.
Item Part No.  Part Name
1 203-7893  formula & Water t ank assembly (includes cap and insert)
2.  203-6675  cap and insert for formula & Water t ank
3.  203-7894  dirty t ank assembly (includes entire tank)
4.  203-7904  cord Wrap
5.  203-7896  end caps with edge brushes (2 pack, includes screws)
6.  203-7897  spray t ips assembly (includes two spray tips)
7.  203-7898  in-line filter assembly (includes cap and filter)
8.  203-7901  nozzle gasket
9.   203-7906   nozzle cover assembly (includes gasket, nozzle cover, and front nozzle cover)
10.  203-7907  front nozzle 
11.  203-7915  brush assembly (includes 2 brush rolls, 2 axles, and 2 swivel arms)
12.  203-7916  brush single Pack (includes 1 brush roll, and 1 axle)
13.  203-7900  small brush belt
14.  203-7899  large brush belt
15.  203-6689  hose secure latch 
16.  203-7918  dirty t ank gasket assembly (include both gaskets
)
17.  203-7917  diverter cover assembly (includes cover and screws)
*Not all parts are included with every model.
1
6
11
16 2
7
12
173
8
13
 4
9
14
5
10
15  
						

							www.bissell.com 800.237.769119
Warranty – Accessories – BISSELL deep cleaner
this warranty gives you specific legal rights, and you may also have othe\
r rights which may vary from state to state. if you need additional instruction regarding this warranty or have 
questions regarding what it may cover, please contact bissell consumer services by e-mail, 
telephone, or regular mail as described below.
Limited Two Year Warranty
subject to the *eXcePtions and eXclusions identified below, upon receipt of the  product bissell will repair or replace (with new or remanufactured components or produ\
cts),  
at bissell ’s option, free of charge from the date of purchase by the original purch\
aser, for  
two year any defective or malfunctioning part.
see information below on "if your bissell product should require service".
this warranty applies to product used for personal, and not commercial or\
 rental service. this   
warranty does not apply to fans or routine maintenance components such a\
s filters, belts, or   
brushes. damage or malfunction caused by negligence, abuse, neglect, unauthorized \
repair, or   
any other use not in accordance with the user's guide is not covered.
 
If your BISSELL product should require service:
contact bissell consumer services to locate a bissell authorized service center in your area. 
if you need information about repairs or replacement parts, or if you have questions about 
your warranty, contact bissell consumer services.
Website or E-mail:  
www.bissell.com
Or Call:  
bissell consumer services  
1-800-237-7691  
monday – friday 8 am - 10 pm et  
saturday 9 am - 8 pm et  
Or Write:  
bissell homecare, inc.  
Po box 3606  
grand Rapids, mi 49501  
attn: consumer services
bissell is not liable foR incidental oR conseQuential damages of any natuRe 
associated With the use of this PRoduct . bissell’s liability Will not eXceed the 
PuRchase PRice of the PRoduct .
 
Some states do not allow the exclusion or limitation of incidental or co\
nsequential 
damages, so the above limitation or exclusion may not apply to you. 
*EXCEPTIONS AND EXCLUSIONS FROm THE TERmS OF THE LImITED WARRANTY
this WaRRanty is eXclusiVe and in lieu of any otheR W aRRanties eitheR oRal oR 
WRitten. any imPlied W aRRanties Which may aRise by oPeRation of la W, including 
the imPlied W aRRanties of meRchantability and fitness foR a P aRticulaR PuRPose, aRe  
limited to the tWo yeaR duRation fRom the date of PuRchase as descRibed aboVe.
some states do not allow limitations on  how long an implied warranty las\
t so the above limitation 
may not apply to you.  
						

							Registering is quick, easy and offers you benefits over the lifetime of \
your product.  
y ou’ll receive:
BISSELL Rewards Points
automatically earn points for discounts and free shipping on future purchases.
Faster Service
supplying your information now saves you time should you need to contact us with 
questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Special Promotions
optional: Register your email to receive notice of offers, contests, clea\
ning tips and more!
Visit www.bissell.com/registration now!
Don't forget to register your product!
©2012 bissell homecare, inc
grand Rapids, michigan
all rights reserved. Printed in china
Part number 120-4437
Rev 1/12
Visit our website at:
www.bissell.com
scotchgard is a trademark of 3m
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services  1-800-237-7691
 
Monday – Friday  8 am - 10 pm ET
Saturday    9 am -   8 pm ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids  MI 49501
ATTN: Consumer Services
 
Or visit the BISSELL website -  www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date:  ___________________
NOTE: Please keep your original sales receipt. It  
provides proof of purchase date in the event of a  
warranty claim. See Warranty on page 19 for details.  
BISSELL consumer services
www.bissell.com 800.237.769120