Bissell Little Green 1720 1 Manual

							USER’S GUIDE
1720 -1725 SERIES
Little Green® 
Safety Instructions
Product view
Product features
3
4
5-6
7-9
Storage9
Troubleshooting10
Warranty12
Replacement Parts 11
Consumer Services 11
Operations 
						

							Thanks for buying a BISSELL Little Green Portable Deep Cleaner
We’re glad you purchased a BISSELL Little Green®Portable Deep
Cleaner. Everything we know about floor care went into the design and con-
struction of this handy, high-tech home cleaning system.
Your Little Green is well made, and we back it with a full one-year
warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Services department, so, should you ever have a
problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today,
BISSELL is a global leader in the design, manufacture, and service of high
quality homecare products like your Little Green.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
2 
						

							3
IMPORTANT SAFETY INSTRUCTIONS
Use only manufacturer’s recommended
attachments.
Use only cleaning products formulated by 
BISSELL for use in this appliance.
Keep openings free of dust, lint, hair, etc.
Keep appliance on a level surface.
Turn off all controls before unplugging.
Unplug by grasping the plug, not the cord. Do
not unplug by pulling on cord.
Be extra careful when cleaning stairs.
Close attention is necessary when used by
or near children  .
SAVE THESE INSTRUCTIONS.
GROUNDING INSTRUCTIONS.
This appliance must be connected to a
grounded wiring system. If it should 
malfunction or break down, grounding 
provides a safe path of least resistance for
electrical current, reducing the risk of 
electrical shock. The cord for this appliance
has an equipment-grounding conductor and
a grounding plug. It must only be plugged
into an outlet that is properly installed and
grounded in accordance with all local codes
and ordinances.
WARNING: Improper connection
of the equipment-grounding conductor
can result in a risk of electrical shock.
Check with a qualified electrician or 
service person if you aren’t sure if the outlet
is properly grounded. DO NOT MODIFY THE
PLUG. If it will not fit the outlet, have a 
proper outlet installed by a qualified 
electrician. This appliance is designed for
use on a nominal 120-volt circuit, and has a
grounding attachment plug that looks like
the plug in the drawing above. Make certain
that the appliance is connected to an outlet
having the same configuration as the plug.
No plug adapter should be used with 
this appliance.
This model is for household use only.
WARNING:  When using an
electrical appliance, basic precautions
should be observed, including the following:
Readall
instructions beforeusing your 
LITTLE GREEN®Use only on surfaces
moistened by cleaning process.Always 
connect to a properly grounded outlet, see
grounding instructions. Unplug from outlet
when not in use 
and before conducting maintenance 
or troubleshooting. 
To reduce the risk of fire, electric shock 
or injury:
Do not expose to rain, store indoors.
Do not leave LITTLE GREEN®when it is
plugged in.
Do not service LITTLE GREEN®when it is
plugged in.
Do not use with damaged cord or plug.
Do not use LITTLE GREEN®if it has been
dropped, damaged, left outdoors or
dropped into water, have it repaired at an
Authorized  Service Center.
Do not pull or carry by cord, use cord as a 
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
Do not carry the appliance while in use.
Do not handle LITTLE GREEN®plug or 
appliance with wet hands.
Do not put any object into appliance openings,
use with blocked opening, or restrict air flow.
Do not expose hair, loose clothing, fingers
or body parts to openings or moving parts.
Do not pick up hot or burning objects.
Do not pick up flammable or combustible
materials (lighter fluid, gasoline, kerosene,
etc.) or use in the presence of explosive 
liquids or vapor.
Do not use appliance in an enclosed space
filled with vapors given off by oil base
paint, paint thinner, some moth proofing
substances, flammable dust, or other
explosive or toxic vapors.
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
Do not modify the 3-prong grounded plug.
Do not allow to be used as a toy.
Do not use for any purpose other than
described in this User’s Guide.
Unplug before attaching the TurboBrush™.
Never spray at people or animals.
Grounded
Outlets
Grounding Pin 
						

							P
O
W
E
RH
EA
TE
R
4Heat
Indicator
Light
Cap
Solution/Clean
Tank Spray
Trigger Vacuum
Flex Hose
Heater Switch Power Switch
Grip/Trigger
On Board
Cord Storage Heater
Collection/Dirty Tank4” Cleaning
Tool
Power Cord
5.
3.6.
2.
1.
7.
4.
WARNING: Do not use an extension cord
with this product. The use of
an extension cord may result
in a severe electrical shock,
particularly if the extension
cord does not have an 
electrical rating higher than
that of the product, if the
extension cord does not 
have a three prong grounding
plug and connector and if 
the extension cord is not
plugged into a circuit 
box with a ground fault 
circuit interrupter. Safety 
precautions such as keeping
all connections off the
ground and dry will not 
eliminate the danger.
WARNING: Do not use this product while
on any type of a ladder. Do
not place the product in a
place where it will be
stepped on or kicked while 
in use. Do not place the
product on an elevated 
surface where it may be
pulled off the surface while
in use. 
						

							This User’s Guide has been designed 
to help you get the utmost satisfaction from 
your BISSELL Little Green Portable Deep Cleaner.
You’ll find assembly and operating instructions,
safety precautions, as well as maintenance and 
troubleshooting instructions. Please read this
Guide thoroughly before assembling your cleaner.
Pay particular attention to the product 
diagram, assembly instructions, and part names.
Locate and organize all parts before assembly.
Familiarize yourself with the parts and where they
go. Following this User’s Guide will greatly
enhance your ability to get the most performance
from your BISSELL Little Green for many years.
Refer to Assembly Diagram on page 4
Solution Tank
The Solution Tank is the translucent tank at your
right as you face the Little Green. Remove the
Tank by grasping the indented handle and pulling
it toward you, then tilting out.
To Fill the Solution Tank
Open the Solution Tank by pulling up on the round
cap. Add BISSELL Little Green Formula to the 
FORMULA fill line (8-oz.) on Solution Tank.
NOTE: Your Little Green is shipped with an 8
oz. starter bottle of formula.
Fill the Solution Tank with hot (NOT boiling) tap
water to the WATER fill line.
Replace the cap before placing the Solution Tank
back into the unit.
Replace the Solution Tank by pacing it bottom first
into the cavity, then tilting it, pressing gently at top
until it snaps closed.
Collection Tank
The Collection Tank is the translucent tank at your
left as you face the Little Green. It is removed
and replaced on the unit just like the Solution
Tank. Empty the Collection Tank after each use,
when dirty water reaches the indicated maximum
fill line, or as instructed in this User’s Guide.
5
Product Features
How to use this guide
Water
Fill
Line
Formula Fill Line
WARNING: Do Not plug in your deep 
cleaner until you have 
completely assembled it per
the following instructions
and are familiar with all
instructions and operating
procedures. 
						

							6
POWERHEATER
Product Features Continued
Vacuum Flex Hose with Grip/Trigger Unit
Store  in the on-board hose storage on the back of the Little Green.
Cleaning tools attach to the Grip/Trigger unit.
Power Cord
The cord, with a three-prong grounded plug, stores in the On Board
Cord Storage at the bottom of the Little Green.
Note: Unwrap Power Cord completely before 
operating unit.
Built-in-heater
Not included with all models
With the Little Green ProHeat, you have the ability to turn on, or leave
off, the built-in heater, based on your cleaning needs.
The Little Green ProHeats’ built-in heater will raise the water temperature
for improved cleaning performance. To use Little Greens’ built-in heater,
first turn the Power Switch ON and then turn the Heater Switch ON.
Within 30 seconds, the Heat Indicator Light will illuminate, indicating the
heater has reached the correct temperature.
Begin using by depressing the Spray Trigger. Wait 5-10 seconds for
non-heated water and solution mixture to travel through the Flex
Hose. After 5-10 seconds, the heated water and solution mixture is
ready to be applied to carpet or upholstery.
See Page 8 for cleaning instructions.
Depending on which model you purchased, your
Little Green may be equipped  with one or more of
these tools:
4” wide Cleaning Tool (included with all models)-For 
cleaning carpet, upholstery and spot cleaning
Spraying Crevice Tool-For cleaning in tight areas
6” wide Cleaning Tool-For larger areas
TurboBrush Cleaning Tool-Rotating brush for extra cleaning
action for small areas, upholstery and stairs
To order optional tools not originally included with your  Little Green
see“Part Numbers and Descriptions,”page 9
Specialized Cleaning Tools
1.
2.
3.
4.
WARNING: Use only BISSELL Little
Green formula in your
cleaner. Use of cleaning
formulas which contain
lemon or pine oil may
damage this appliance 
and void warranty.
Chemical spot cleaners
or solvent-based soil
removers should not be
used. These products
may react with the plas-
tic materials used in
your cleaner, causing
cracking or pitting.
BRUSH
SUCTION
Power Switch Heater SwitchHeat
Indicator
Light 
						

							7
Remove Vacuum Flex Hose completely from On Board 
Hose Storage.
Attach 4” Tool, TurboBrush* or Crevice Tool* to Grip Trigger Unit
by pressing Tool onto Grip/Trigger Unit firmly, until button snaps
into hole. Make certain Tool is securely attached.
Unwrap Power Cord completely from On Board Cord Storage
and plug into 1230 Volt, 60 Hz grounded outlet as described in
Important Safety Instructions, page 3.
Turn Power switch to ON Position.
Note: If your LIttle Green has a built-in heater, refer to
instructions on page 7.
Press and hold Spray Trigger on Grip/Trigger unit. Spray will
start in a few seconds.
Raise the Tool slightly to check for spray. If spray does not
start, press firmly on the front of the Solution Tank while
depressing Spray Trigger.
*Optional on some Little Green models. To order optional
parts not originally included in your Little Green model,
call BISSELL Consumer Services at the telephone num-
ber listed on page 9.
Pre-treat stained or highly soiled areas: Hold the flex hose
with tool attached above carpet or upholstery, and pull trig-
ger to spray cleaning solution.
Wait 3-5 minutes before cleaning.
6.
5.
1.
2.
3.
4.
How To Deep Clean Carpet or Upholstery
Getting Ready
WARNING: Be sure to unplug the
cord before attaching
the Turbobrush.
1.
2.
Pre-treating 
						

							Place the tool directly on soiled surface at arms length. Apply
downward pressure on the tool and pull toward you, while
pulling trigger to spray cleaning solution.
Note: If using the TurboBrush, the switch should be in the
“BRUSH” position. This activates the brush only.
Repeat, keeping the tool firmly against the surface. Continue
until no more dirt can be removed.Do not overwet.
Note: If using the Turbobrush, move the switch to the 
“SUCTION” position. This activates the suction to remove the
dirt and cleaning solution. Move the switch back to the
“BRUSH” position for additional brushing action.
Do not overwet.
Release spray trigger. Vacuum area until no more cleaning
solution can be removed.
Note: If using the Turbobrush, move the switch to the 
“SUCTION” position. This activates the suction to remove the
dirt and cleaning solution.
If the tool stops spraying, turn OFF Power Switch and check
cleaning solution level. Refill if needed. Never run dry.
Check the manufacturer’s tag before cleaning. “W” or “WS” on
the tag means you can use your Little Green. If tag is coded
with an “S” (with diagonal strike-through), or says “Dry Clean
Only,” do not proceed.
If manufacturer’s tag is missing or not coded, check with your
furniture dealer.
If possible, check upholstery stuffing. Colored stuffing may
bleed through fabric when wet.
8
BRUSH
SUCTION
3.
4.
1.
2.
Deep Cleaning
3.
Deep Cleaning Upholstery
1.
2.
Tip:
Check upholstery
stuffing before
cleaning.
Colored stuffing
may bleed
through fabric
when wet.
Tip:
Deep cleaning
stairs and high
traffic areas on a
regular basis can
prolong carpet
life. 
						

							9
1.
3.
2.
5.
WARNING: Keep face away from
spray. Failure to do so
may result in personal
injury.
Tip:
Before turning off
Little Green, vacu-
um up clean water
to thoroughly rinse
the Vacuum Hose.
Then, lift the tool
and point upwards.
This allows any
water still in the
Hose to flow into
the Collection Tank.
3.
2.
4.
1.
4.
When You’re Done
Turn Power Switch to OFF position.
Unplug Power Cord from outlet.
Remove and rinse Solution Tank, then replace.
Note: If a significant amount of Little Green formula/water
remains, you many leave it in the Solution Tank for your next
cleaning task.
Remove Collection Tank, fill with clean water, rinse thoroughly
and discard, then replace.
Disconnect the tool from Grip/Trigger unit by pushing down on
button lock and pulling straight off (Do NOT twist tools to
remove them).
Once removed from the Vacuum/Flex Hose, the tools can 
be cleaned:
4”, 6”, or Crevice tool-Rinse under clean running
water.TurboBrush tool-Switch must be in “SUCTION” posi-
tion. Rinse under clean running water.
Check Spray Nozzle for accumulated dirt or debris. If neces-
sary, clean with soft bristle brush.
Wipe all surfaces with a soft cloth.
Wrap Power Cord around Onboard Cord Storage at the bottom
of Little Green.
Wrap Vacuum Flex Hose around Onboard Hose Storage and
secure Grip/Trigger.
Store Cleaner in protected, dry area, at room temperature 
(40º to 110ºF).
Note: For Little Green TurboBrush Models, on-board storage 
for the TurboBrush Tool has been provided on the back of the
unit. Attach the TurboBrush to the unit by pressing onto 
holder firmly until button snaps into hole.
Storage
6.
7.
BRUSHSUCTION
TurboBrush
Cord Storage
Flex Hose 
						

							10
Troubleshooting
Cleaner won’t run.
Possible Causes Remedies
Power Unit not plugged in Check electrical plug
Blown fuse/tripped breaker Replace household fuse or Reset 
Breaker
Call BISSELL Consumer Services
Reduced spray or no spray
Possible Causes Remedies
Spray Nozzle clogged Clean Spray Nozzle
Solution Tank empty Check/Refill Tank  
Solution Tank outlet clogged Clean outlet at bottom of Solution Tank
Pump needs priming Push firmly on Solution Tank front 
while depressing Spray Trigger
Vacuum won’t pick up cleaning solution
Possible Causes Remedies
Poor Upholstery/Carpet Tool Reposition Upholstery/Carpet Tool on 
position  surface, follow recommended cleaning 
procedures
Collection Tank is full Empty Collection Tank
Upholstery/Carpet Tool Brush worn Replace with new Brush
Excess solution in Vacuum Flex Hose Lift Tool and point upwards to allow water
in Hose to flow into the Collection Tank
Incorrect switch position on TurboBrush Reposition switch to “Suction” Position
Excessive Foam in the Collection Tank
Possible Causes Remedies
Residue left in carpet or fabric Flush carpet by using clear water in 
form prior cleaning  Solution Tank
Check Tank often/empty as necessary
Incorrect cleaning formula Use BISSELL Little Green formula only
TurboBrush attachment-Brush will not turn
Possible Causes Remedies
Incorrect switch position on TurboBrush Reposition switch to “Brush” position
WARNING: To reduce the risk of
injury from moving parts
and/or electrical shock,
turn Power Switch OFF
and disconnect polarized
plug from electrical out-
let before performing
troubleshooting checks.