Home > Bissell > Cleaner > Bissell 7901-r Manual

Bissell 7901-r Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Bissell 7901-r Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 201 Bissell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							21 DirtLifter PowerBrush does not turn.
    Possible Causes Remedies
    The Brush Belt or Pump Belt Turn the machine OFF and unplug from
    is off or broken. the outlet. To check if a Pump Belt has
    broken, you will need a flat head 
    screwdriver. Insert the blade end into 
    the lower slot of the Belt Access door 
    to release the lower snap. If necessary,
    insert the blade end into the upper slot
    to release the upper snap. Examine the
    belt for breakage. If broken refer to 
    pages 18-19.
    Carpet Protector is not spraying.
    Possible Causes Remedies
    Bottle not connected  Follow instructions on cartridge 
    properly to the tool. assuring proper fit.
    Solution clogging the  Soak applicator tool only in hot water.
    Spray trigger. Spray without the cartridge attached to
    purge any residual Solution left in 
    the tool.
    Applicator tool spray is blocked. Soak applicator tool only in hot water.
    Spray without the cartridge attached to
    purge any residual Solution left in 
    the tool.
    SmartMix not set on water/rinse Set to proper setting.
    carpet protector setting.
    ReadyTool dial not set on tool setting. Set to tool setting.
    Cleaner not picking up solution.
    Possible Causes Remedies
    Ready Tools dial may be at the Set ReadyTools dial to either Tools or
    wrong setting for the cleaning job. PreTreat or Floor Cleaning.
    Nozzle Window may not be  Press down firmly on the black oval 
    properly attached. gasket at the top window to make sure
    the two tabs on the back of the Nozzle 
    Window are snapped into the mating 
    slots in the main housing.
    Tank-in-Tank lid is not Re-install lid; refer to The Operations 
    properly installed.section.
    Tank-in-Tank is not properly seated. Tank-In-Tank must be firmly seated to
    function; remove and reseat Tank-in-Tank.
    Poor tool position. Adjust angle; apply more downward 
    (Hand held attachments only). pressure.
    Tank-in-Tank has picked up  Empty Tank-in-Tank, refer to 
    maximum dirty water. the Operations section.
    Troubleshooting Continued 
    						
    							22
    BISSELL Consumer Services
    For information about repairs or replacement parts, or questions about
    your warranty, call:
    BISSELL Consumer Services
    1-800-237-7691 
    Monday - Friday 8 a.m. — 9 p.m. EST
    Saturday 9 a.m. — 5 p.m. EST
    Or write:
    BISSELL Homecare, Inc.
    PO Box 3606
    Grand Rapids  MI 49501
    ATTN: Consumer Services
    Or visit the BISSELL website - www.bissell.com
    When contacting BISSELL, have model number of unit available.
    Please record your Model Number: ___________________
    Please record your Purchase Date: ___________________
    NOTE: Please keep your original sales receipt. It provides proof of date of
    purchase in the event of a warranty claim. See About Your Warranty
    on page 24 for details.
    Please do not return this product to the store. 
    						
    							23
    Replacement parts - BISSELL ProHeat®Pro-Tech®
    Item Part No. Part Name
    1* 210-9201 4”Small Area Tool
    2* 603-0910 6”Stair Tool
    3* 210-9148Spraying Crevice Tool
    4* 210-1197 TurboBrush
    ®
    5* 214-9131Bare Floor Tool
    6* 014-9142PreTreat Wand
    7* 215-9155 Tough Stain Brush
    8 015-9043 Tank Assembly Complete (Includes Lid Assembly)
    9 015-4439 Tank Lid Assembly 
    10 015-9041 Tank Bottom (Assembly)
    11 210-1785 SmartMix
    ® Bottle (Includes Cap Assembly)
    12 210-1795 SmartMix®Cap Assembly
    13 210-1651 Flow Indicator Cap
    14 010-6214 Flow Indicator O-Ring
    15 210-7635 Flow Indicator Rotor
    16 210-3510 Flow Indicator Filter
    17 210-4052 Window Gasket
    18 014-9865 Floor Nozzle Window and Gasket
    19 015-0628 Replacement Pump Belt (With Instructions)
    20 015-0621 Replacement Brush Belt (With Instructions)
    21 015-3500 Lint Screen
    22 0464 Scotchgard
    ™Protector Cartridge
    23 015-2152 Applicator Tool
    *Not all parts are included with every model.
    123BRUSH
    SUCTION45
    678910
    1113171920
    212223 1214
    15
    16
    18 
    						
    							24
    This warranty gives you specific legal rights, and you may also have other rights which
    may vary from state to state. If you need additional instruction regarding this warranty
    or have questions regarding what it may cover, please contact BISSELL Consumer
    Services by E-mail, telephone, or regular mail as described below.
    Limited Tw oYear Warranty
    Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the
    product BISSELL Homecare, Inc. will repair or replace (with new or remanufactured
    components or products), at BISSELL’s option, free of charge from the date of 
    purchase by the original purchaser, for two years any defective or malfunctioning part.
    See information below on If your BISSELL product should require service.
    This warranty applies to product used for personal, and not commercial or rental service. This
    warranty does not apply to fans or routine maintenance components such as filters, belts, or
    brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or
    any other use not in accordance with the Users Guide is not covered.
    If your BISSELL product should require service:
    Call BISSELL Consumer Services at the number below or visit the BISSELL website -
    www.bissell.comto locate a BISSELL Authorized Service Center in your area. If there
    are no authorized BISSELL Service Centers in your area, select the Customer Service
    tab, and follow the instructions for contacting us via email. A BISSELL Representative
    will issue you a Return Authorization Number and a pre-paid mailing label to return the
    unit to BISSELL for warranty repair.
    The machine should be returned with a photocopy of your proof of purchase. (Your
    dated sales receipt is your proof of date of purchase in the event of a warranty claim -
    do not send original.) 
    If you need information about repairs or replacement parts, or if you have questions
    about your warranty, select the Customer Service tab on our website and follow the
    instructions for contacting us by e-mail.
    Or call:
    BISSELL Consumer Services
    1-800-237-7691
    Monday - Friday 8 a.m. - 9 p.m. EST
    Saturday 9 a.m. - 5 p.m. .EST 
    Or write:
    BISSELL HOMECARE, INC.
    PO Box 3606
    Grand Rapids MI 49501
    ATTN: Consumer Services
    BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE
    ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE
    PRICE OF THE PRODUCT.
    Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 
    above limitation or exclusion may not apply to you.
    *EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITEDWARRANTY
    THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL 
    OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW,
    INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
    PARTICULAR PURPOSE, ARE LIMITED TO THE TWO YEAR DURATION FROM THE DATE OF 
    PURCHASE AS DESCRIBED ABOVE.
    Some states do not allow limitations on how long an implied warranty lasts, so the above limitation 
    may not apply to you.
    About Your Warranty
    ©2003 BISSELL HOMECARE, Inc.
    Grand Rapids, Michigan
    All rights reserved. Printed in USA.
    Part Number 310-5903
    Rev 7/03
    Visit our website at:
    www.bissell.com
    Scotchgard is a trademark of 3M 
    						
    All Bissell manuals Comments (0)

    Related Manuals for Bissell 7901-r Manual