Bissell 21k3-2 Manual

2Thank You
USER'S GUIDE
32Y7 / 22C1 / 21K3 / 71V9 SERIES
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
Warranty
Troubleshooting
Product Registration
Consumer Services
3
4
5
6-8
8-12
14-15
13
16
16
Replacement Parts
Accessories14
14
Earn BISSELL Rewards! 
Register your  product today!
See details on  back page 
®
*product images may vary      

We’re glad you purchased a BISSELL vacuum. Everything we know 
about floor care went into the design and construction of this  
complete, high-tech home cleaning system.  
Your carpet cleaner is well made, and we back it with a limited 
warranty. We also stand behind it with a knowledgeable, dedicated 
Consumer Services department, so, should you ever have a problem, 
you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, 
BISSELL is a global leader...

www.bissell.com 800.237.7691
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, basic precautions should be observed, including the following: 
READ ALL INSTRUCTIONS BEFORE USING UPRIGHT VACUUMAlways connect to a polarized outlet (left slot is wider than right). Unplug from outlet when not in use and before conducting maintenance. 
    WARNING:  
To reduce the risk of fire,  electric shock, or injury:■ Do not modify the polarized plug to fit a non-polarized outlet or extension cord. ■...

Power Cord
Power Switch
www.bissell.com 800.237.76914
Product view
WARNING:   Plastic film can be  dangerous. To avoid danger of suffocation, keep away from babies and children.
CAUTION:  Do not plug in your vacuum cleaner until you are familiar with all instructions and  operating procedures.
Carry Handle
Crevice Tool
Quick Release® Cord  Wrap
Quick  Reach Handle
Handle Release  Pedal
Powerfoot
Stretch Hose 
TurboBrush®
Tool
Extension Wand
Furniture  Protection  Guard
Height Adjustment Knob
Dirt...

www.bissell.com 800.237.7691
Assembly 
5
2.
2.
The only tool you’ll need to  assemble your vacuum cleaner  is a Phillips head screwdriver.
Attach handle to vacuum
1. Locate the vacuum handle and remove the screw packet taped to  the base of the handle.
2. Stand the vacuum upright and  slide the base of the handle firmly  into the grooves at the top of the vacuum body.
3. Check to be sure the handle is fitted to the vacuum body. If there is a gap in front, continue to push firmly until the handle is...

www.bissell.com 800.237.7691
Operations 
6
Handle position
Press the handle release pedal with your  foot to place your CleanView Helix into   one of three cleaning positions.
1. Upright– For storage and above floor  cleaning with tools.
2. Normal cleaning – Press handle release  household floor cleaning tasks.
3. Low cleaning –With the vacuum in  normal cleaning position, press handle release pedal again, use for reaching under low furniture such as tables, chairs or beds.
Height adjustment
There are...

www.bissell.com 800.237.76917
Operations
Air flow indicator (select models only)
The air flow indicator tells you when  airflow in the vacuum is reduced due to a clog in the hose. The indicator will remain green until the airflow is reduced. When it is fully red, the airflow is significantly reduced or blocked. Follow the steps on page  12 to clear a clog. 
Special tools
Your BISSELL CleanView Helix is  not only a powerful carpet and rug vacuum cleaner, it’s also a versatile above floor vacuum cleaner...

www.bissell.com 800.237.7691
Operations
8
Power cord storage
When you have finished using your BISSELL CleanView Helix, return it  to the upright position and store the  power cord.
1. Turn vacuum cleaner off.
2. Unplug power cord by grasping the polarized plug (NOT the cord) and  disconnect from outlet.
3. Loop power cord around cord wraps  on side of vacuum cleaner.
4. Clip molded plug to power cord to secure.
To maintain maximum cleaning  performance, the following  maintenance steps must be...

www.bissell.com 800.237.76919
Maintenance and care
Empty Dirt Container continued
5. Put the dirt container back in the  vacuum and slide the lever to the "Lock" position.
Note: The dirt container may be washed in warm water with a mild detergent. Make sure it is completely dry before replacing. Do not wash any components in the dishwasher. Hand wash only.
Use only genuine BISSELL style replacement filters in your BISSELL CleanView Helix.
1. Unplug the cleaner from electrical outlet.
2. a) Remove...

www.bissell.com 800.237.7691
Maintenance and care
10
Cleaning the pre-motor filter
1. Unplug the cleaner from electrical outlet.
2. The pre-motor filter protects the motor  from debris. It is located underneath the  filter cup in the center of the round part  of the Lock ‘n Seal lever.
3. Remove the small round filter and any debris on top of it. Rinse well under  warm water, then air dry thoroughly  before replacing.
Replacing the post-motor filter
Use only genuine BISSELL style 9 (#32076) replacement...