Bissell 1640 4 Manual

							Models 1690 and 1695
n
Assembly
n
Operation
n
Safety
n
Storage
SmartCleanTM
System
n
Multi-motor system for more 
cleaning power
n
SmartMixTM
automatically adjusts
formula to specific cleaning need
n
Floating brush suspension adjusts 
to all floor surfaces
nOn-board tools for above 
floor cleaningUser’s GuideWe’re glad you purchased a BISSELLP O W E R S T E A M E R™
Upright Deep Cleaner. Everything we know about floor care
went into the design and construction of this complete, 
high-tech home cleaning system.
Your P O W E R S T E A M E R™
is well made, and we back it
with a full one-year warranty. We also stand behind it with a 
knowledgeable, dedicated Consumer Services department,
so, should you ever have a problem, you’ll receive 
fast, considerate assistance.
My great-grandfather invented the floor sweeper 
in 1876. To d a y, BISSELL is a global leader in the design, 
manufacture, and service of high 
quality homecare products like 
your P O W E R S T E A M E R.™
Thanks again, from
all of us at BISSELL.
Mark J. Bissell
President and Chief Executive OfficerThanks for buying a BISSELL POWERSTEAMERTM
Upright Deep Cleaner. 
						

							n
Use only manufacturer’s recommended 
attachments
n
Use only cleaning products formulated by 
BISSELL for use in this appliance
n
Keep openings free of dust, lint, hair, etc.
n
Keep appliance on a level surface
n
Turn off all controls before unplugging
n
Unplug by grasping the plug, not the cord
n
Be extra careful when cleaning stairs
n
Pay close attention when working around 
children
S AVE THESE INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least 
resistance for electrical current, reducing the risk of 
electrical shock. The cord for this appliance has an
equipment-grounding conductor and a grounding
plug. It must only be plugged into an outlet that is
properly installed and grounded in accordance with
all local codes and ordinances.
WA R N I N G :Improper connection
of the equipment-grounding conductorcan
result in a risk of electrical shock. C h e c k
with a qualified electrician or service person
if you aren’t sure if the outlet is properly
grounded. DO NOT MODIFY THE PLUG. 
If it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
This appliance is designed for use on a
nominal 120-volt circuit, and has a
grounding attachment plug that looks like
the plug in the drawing above. Make certain
that the appliance is connected to an 
outlet having the same configuration as
the plug. No plug adapter should be used
with this appliance. WA R N I N G :When using an electricalappliance, basic precautions should be
observed, including the following:Read all
instructions beforeusing your POWERSTEAMER.TM
To reduce the risk of electric shock, use indoors
only. Do not immerse. Use only on surfaces 
moistened by cleaning process. Always connect to
a properly grounded outlet. Unplug from outlet
when not in use and before conducting 
maintenance or troubleshooting. 
n
Do not leave machine when it is plugged in
n
Do not service machine when it is plugged in
n
Do not use with damaged cord or plug
n
Do not use machine if it has been dropped, 
damaged, left outdoors or dropped into water
n
Do not expose to rain, store indoors. 
n
Do not handle unit with wet hands
n
Do not pull or carry by cord, use cord as a 
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces
n
Do not carry the appliance while in use
n
Do not unplug by pulling on cord-unplug by
grasping plug
n
Do not handle plug or appliance with wet hands
n
Do not put any object into appliance openings,
use with blocked opening, or restrict air flow
n
Do not expose hair, loose clothing, fingers or
body parts to openings or moving parts
n
Do not pick up hot or burning objects
n
Do not pick up flammable or combustible 
materials (lighter fluid, gasoline, kerosene, etc.) 
or use in the presence of explosive liquids or vapor
n
Do not use appliance in an enclosed space filled
with vapors given off by oil base paint, paint 
thinner, some moth proofing substances, 
flammable dust, or other explosive or toxic vapors
n
Do not pick up toxic material (chlorine bleach, 
ammonia, drain cleaner, gasoline, etc.)
n
Do not modify the 3-prong grounded plug
n
Do not allow to be used as a toy
n
Do not use for any purpose other than described
in this User’s Guide
2IMPORTANT SAFETY INSTRUCTIONSGrounded
Outlets
Grounding Pin 
						

							5.3 Spraying 
Crevice 
ToolBolt and Nut 
(2)
Power 
Cord4.
Upholstery/
Carpet Tool3.
Flex Hose
Assembly
Back ViewLower
Chassis Handle
Assembly1.2. Upper Hose
RackLower 
Hose 
RackLower
Cord
HolderUpper
Cord
Holder 
						

							41.2.3.4.5.Handle Assembly.Slide Handle Assembly (with
attached Hose Rack/Cord Holder) down onto Lower
Chassis until it will go no further. Secure by placing
two (2) Phillips Head         bolts into front of Handle
Assembly and into hex nuts at back of Lower Chassis
unit, as shown.
Power Cord.  Wrap Power Cord around upper and
lower Cord Holders, and secure Plug to Cord with
molded clip.
NOTE:Your POWERSTEAMERTM
features a Cord
Quick-Release. To easily release Power Cord, rotate
upper Cord Holder and remove Cord. Use clip at 
back of Handle Assembly to secure Power Cord 
when using cleaner.
Flex Hose Assembly.Coil Flex Hose Assembly on
back of POWERSTEAMER,TM 
using the hose racks 
to guide and secure the Hose.
Upholstery/Carpet Tool.  Connect Upholstery/
Carpet Tool to end of Flex Hose Assembly by 
depressing the button at the end of the Hose. 
Slide the Tool over the Hose end until the button
snaps into place in hole in Tool. Secure Hose/Tool
unit in clamp at upper right side.
Spraying Crevice Tool.  Clip Spraying Crevice 
Tool to Flex Hose Assembly just below the
Upholstery/Carpet Tool using the Spraying 
Crevice Tool Hose Clip.
Assembly is now complete.Your POWERSTEAMERTM
is packaged as two 
primary components–the Lower Chassis and the
Handle Assembly. Also included is a 10’ Flex Hose
Assembly and Upholstery/Carpet Tool. Additional
attachments are included on some models.The only thing you will need to assemble your cleaner
is a Phillips head         screwdriver. This User’s Guide has been designed to help you get
maximum satisfaction from your POWERSTEAMERT M
Upright  Deep Cleaner. You’ll find assembly 
instructions for all cleaning tasks, safety 
precautions, pre-cleaning tips,  and maintenance
and troubleshooting instructions. Please read this
Guide thoroughly before assembling your cleaner. How to use this guide
Pay particular attention to the assembly diagram,
assembly instructions, and part names. Locate and
organize all parts before assembly. Familiarize
yourself with  the parts and where they go. 
Following the Guide will greatly enhance your 
ability to get top performance from your cleaner 
for many years. 
How to put it together 
						

							5Index
Safety instructions . . . . . . . . . .2
Product view . . . . . . . . . . . . . .3
How to put it together . . . . . . .4
How to begin . . . . . . . . . . . . . .5
Index . . . . . . . . . . . . . . . . . . . .5
Deep cleaning carpet . . . . . .6-7
Cleaning upholstery 
& small areas . . . . . . . . . . . .8-9
Cleaning bare floors . . . . .10-11
Putting it away . . . . . . . . . . . .11
Troubleshooting . . . . . . . . . . .12
Parts . . . . . . . . . . . . . . . . . . .13
Warranty . . . . . . . . . . . . . . . .14
Consumer services . . . . . . . . .14 1.Plan activities to give carpet time to dry.
2.Remove easily moved furniture (chairs, lamps, coffee/
cocktail tables, etc.) from room.
3.Vacuum carpet thoroughly.
4.Decide where to begin–and end–your job. Clean in 3’x 4’
sections, starting in areas farthest from exit. Plan to leave a
path open to empty soiled water and refill cleaner.
5.Carpeting will dry in three to four hours, depending on carpet
style and air circulation in room. A floor fan speeds drying.
6.Replace furniture on damp carpeting by placing waxed
paper under furniture legs until floor dries completely. How to begin...Deepcleaning carpet
1.Check manufacturer’s tag before cleaning. “W” or “WS” on
the tag means you can use your POWERSTEAMER.T M
If tag is
coded with an “X” or “S” (with diagonal strike-through), or
says “Dry Clean Only,” do not proceed. Do not use on velvet
or silk.
2.If manufacturer’s tag is missing or not coded, check with 
your furniture dealer.
3.Check for colorfastness in an inconspicuous place.
4.If possible, check upholstery stuffing. Colored stuffing may
bleed through fabric when wet.Deepcleaning upholsteryTip:
Deep cleaning 
carpeting and
upholstery 
regularly can
reduce dust and
allergens in 
your home. Always vacuum thoroughly before
you deep clean. If possible, move
larger furniture to an area you
will not be cleaning. 
						

							6How to deep clean carpet
Getting ready
1.Unfasten the Clean Water Tank Latch Assembly by lifting
from the bottom with your fingers. 
2.Remove Clean Water Tank Assembly by sliding it up the
Handle Assembly until it comes free.
3.Take Clean Water Tank to sink area, remove Clean Water
Tank Cap and fill Tank with hot (NOT boiling) tap water 
to fill line. Replace Cap securely.
4.Remove SmartMixTM
Formula Tank Assembly from Clean
Water Tank Assembly by grasping bottom with fingers and
sliding it out. 
5.Unscrew SmartMixTM
Formula Tank Cap and Insert
Assembly and add BISSELL Fiber Cleansing FormulaTM
to fill
line. Reclose Cap tightly.
6.Slide SmartMixTM
Formula Tank Assembly back into position
in Clean Water Tank Assembly.
7.Replace Clean Water Tank Assembly by sliding Tank down
the front of the Handle Assembly until it fits snugly against
top of Lower Chassis. Secure with Clean Water Tank 
Latch Assembly.
8.Select SmartCleanTM
setting.
n
WATER ONLY - Use for gentle cleaning of delicate 
fabrics, or for (optional) rinsing following cleaning.
n
NORMAL - Water and Fiber Cleansing Formula are mixed
to optimize normal cleaning. Use for everyday dirt and
soil conditions.
n
HIGH TRAFFIC - Water and Fiber Cleansing Formula are
mixed to optimize heavy cleaning. Use for entryways,
hallways, heavy soil and stains. This setting may require
more frequent refilling on the SmartMixTM
bottle.
9.Unwrap Power Cord from Cord Holder and plug into 
120 Volt, 60 Hz grounded outlet as described in Important
Safety Instructions, page 2.
If cleaner starts when first plugged in, switch cleaner OFF (O)
until ready for use.Pre-treating (optional)
Pre-treat highly soiled carpet, such as hallways 
and other high-traffic areas.
1.Move POWERSTEAMERTM
to an area to be
cleaned.
2.Move 3-position Power Switch to the 
P R E - T R E AT( I ) position to activate solution
pump.
3.Press Release Pedal on Left side of Lower
Chassis with foot. 
4.Pull Trigger on Handle Assembly to spray
cleaning solution as you move cleaner over
soiled areas.
5.Slowly move cleaner back and forth over car-
pet surface one time while depressing Trigger.
Do not overwet.
6.Wait 5 - 10 minutes before full cleaning. WAR NI NG : U s e
o n l y   B I S S E L L   F i b e r
Cl eans ing   F ormu la™
i n
your  POW ERS TEAMER.™
Use  of  cleani ng formulas
wh ic h c onta in  lemon 
or  pine  oil  m ay  damage
th is  appl iance  and  void  
w a r r a n t y.  Chem ic al  spo t
c l e a n er s   o r   s o l v e n t -
b a s e d   so i l   r e m o v e r s
s h o u ld   n o t  b e   u se d .
These  p roducts  may 
react  wi th t he  plas tic
mat er ial s  us ed  i n  your
P O W E R S T E A M E R, ™
c a u s i n g
cracki ng  or  pitt in g. 
						

							7 When you’re done
1.Turn Power Switch to OFF (O) position.
2.Unplug Power Cord from outlet.
3.Remove and empty Clean Water Tank Assembly.
4.Press Release Pedal and tip Handle Assembly back with
Handle Assembly.
5.Release Dirty Water Tank Latch Assembly at bottom of
Lower Chassis.
6.Carefully lift Dirty Water Tank Assembly from Lower
Chassis using Carry Handle Assembly.
7.Carry Tank to a toilet or sink, turn Circular Cap at back of
unit counterclockwise to open, and pour to empty.
8.Fill Dirty Water Tank Assembly with clean water. Rinse
thoroughly and discard water.
9.Remove Dirty Water Tank Triangle Lid and flush suction
opening with clean water. Replace cover. Replace Circular
Cap by turning clockwise.
10.Replace Clean Water Tank Assembly on Handle Assembly
and secure with side latches.
11.Replace Dirty Water Tank Assembly on Lower Chassis and
secure with Clean Water Tank Latch Assembly.
12.See PUTTING IT AWAY on page 11.WARNING: T h e
D i r t y   W a t e r   Ta n k
A s s e m b l y   h o l d s  
appr oxim ately  one 
g all on of   soile d l iquid.
A  s pecial  f lo at  de vi ce  
i n  the  t ank  will  c ause
t he  cl ean er  to  st op
re mov ing   soluti on  from
c arpet,  a nd  the  motor
s ound  t o r ise  in  pi tch
when  the  Di rt y  Wa t e r
Tank  Asse mbl y  is  f ull.
Fai lure  to  empty  ful l
ta nk  w ill   dam age  unit.Tip:
Deep cleaning
stairs and high
traffic areas on a
regular basis can
prolong carpet
life. Deep cleaning
1.Move Power Switch to CLEAN ( II ) position to activate 
solution pump and vacuum motor.
2.Press Release Pedal on left side of Lower Chassis with foot.
3.Slowly move cleaner back and forth over carpet surface 
one time while depressing Trigger. Do not overwet.
4.Repeat motion over same area without depressing Trigger.
5.Repeat Steps 3 and 4 until no more dirt can be removed.
6.Continue to clean entire carpet, working in 
3’ x 4’ sections.
7.Empty the Dirty Water Tank Assembly when dirty water
reaches the full line.
8.If the machine loses suction and/or motor noise rises in
pitch, turn Power Switch to OFF.  Check the Dirty Water
Tank Assembly and empty the tank if it is full [see WHEN
YOU’RE DONE, page 7].
9.If floor nozzle stops spraying, turn Power Switch to OFF and
check water and cleaning solution levels. Refill if needed.
Never run POWERSTEAMERTM
dry. 
						

							1.Unfasten the Clean Water Tank Assembly by lifting from
the bottom with your fingers.
2.Remove Clean Water Tank Assembly by sliding it up the
Handle Assembly until it comes free.
3.Remove Flex Hose Assembly from back of unit.
4.Tip Handle Assembly back by pressing Release Pedal 
on left side of Lower Chassis and pulling back on 
Handle Assembly.
5.Lift Dirty Water Tank Triangle Lid by pulling back on rear
latch with finger.
6.Place triangle-shaped end of Flex Hose Assembly in Dirty
Water Tank Triangle port by placing wide (bottom) end in
first, then pushing latch end in until it snaps into place.
7.Tip Handle Assembly back to its full upright position.
8.Place Solution Tube Connector into the port at the lower
left side of the Handle Assembly. Place tabs on Connector
into notches in port, then turn clockwise to secure. Make
certain Solution Tube is securely fastened to Connector.
9.Select Upholstery/Carpet Tool or Spraying Crevice Tool,
and attach to Flex Hose Assembly using the “button-in-
hole” method.
10.Take Clean Water Tank to sink area, remove Clean Water
Tank Cap and fill Tank with hot (NOT boiling) tap water
to fill line. Replace Cap securely.
11.Remove SmartMixTM
Formula Tank Assembly from Clean
Water Tank Assembly by grasping bottom with fingers and
sliding it out.
12.Unscrew SmartMixTM
Formula Tank Cap and Insert
Assembly and add BISSELL Fiber Cleansing FormulaTM
to
fill line. Reclose Cap tightly
13.Slide SmartMixTM
bottle back into position in Clean Water
Tank Assembly.
14.Replace Clean Water Tank Assembly. Slide Tank down front
of Handle Assembly until it fits snugly against top of Lower
Chassis. Secure with Clean Water Tank Latch Assembly.Getting ready8Tip:
Check upholstery
stuffing before
cleaning.
Colored stuffing
may bleed
through fabric
when wet.How to clean upholstery and small areas 
						

							1.Slowly move Upholstery/Carpet Tool back and
forth over soiled surface, first using spray only,
then spray and vacuum, finishing with 
vacuum only.
NOTE:  Use the Spraying Crevice Tool [optional
on some models] to spray cleaning solution and
remove soil from areas too small to be reached
with the Upholstery/Carpet To o l .
2.Continue to clean soiled area, working in
small sections, until no more dirt can be
removed. Do not overwet.
3.If the machine loses suction and/or motor
noise rises in pitch, turn Power Switch to OFF.
Check the Dirty Water Tank Assembly and
empty the tank if it is full [see WHEN YOU’RE
DONE, page 7].
4.If spray tip stops spraying, turn Power Switch
to OFF and check water and cleaning solution
levels. Refill if needed. 
Never run POWERSTEAMERTM
dry.Cleaning 15.Select SmartCleanTM
setting.
• WATER ONLY - Use for gentle cleaning of delicate 
fabrics, or for (optional) rinsing following cleaning.
•NORMAL - Water and Fiber Cleansing Formula are
mixed to optimize normal cleaning. Use for everyday
dirt and soil conditions.
•HIGH TRAFFIC - Water and Fiber Cleansing Formula are
mixed to optimize heavy cleaning. Use for entryways, 
hallways, heavy soil and stains. 
This setting may require more frequent refilling on the
SmartMixTM
bottle.
16.Unwrap Power Cord from Cord Holder and plug into 
120 Volt, 60 Hz grounded outlet as described in Important
Safety Instructions, page 2.
If cleaner starts when first 
plugged in, switch off until 
ready for use.
9WAR NI NG : U s e
o n l y   B I S S E L L   F i b e r
Clea nsin g  Formula™
i n
your  P OW ERSTEAM ER.™
Use of  clea ning  formulas
whic h  cont ain   lemon 
or  pine  oil   may  da ma ge
this  a pplia nce   and  v oid 
w a r r a n t y.  Ch emica l  sp ot
cl e a n e rs   o r   so l v e n t -
b a s e d   so i l   re m o v e r s
sh o u l d   n o t   b e   u s e d .
The se   produc ts  may 
rea ct   with  the  plast ic
ma ter ials  us ed   in  your
P O W E R S T E A M E R,™
c a u s i n g
cr ac king  or  pit ting.WARNING: D o
n o t   l ay   u n i t   o n   i t s
b a c k   w i t h   C l e a n
Wat er  Tank  As se mbly
i n  pla ce.  Do  not  tip
up  foot  wit h D irty
Water  Tank As sem bly
in  plac e. 
						

							10How to clean bare floors
Getting ready
NOTE: Your POWERSTEAMERTM
is not recommended for 
cleaning wood floors.
n
Use only BISSELLFloor Cleansing FormulaTM
on
no-wax floors. Never use BISSELL Fiber Cleansing
FormulaTM
or other carpet cleaners on bare floors.
n
Sweep before starting.
n
Remove old wax before cleaning.
n
Leave an exit path.
n
Allow at least 1/2 hour drying time.
1.Remove Clean Water Tank Assembly and Dirty Water 
Tank Assembly.
2.Tip POWERSTEAMERTM
back for easier access to Nozzle.
3.Attach Bare Floor Cleaning Tool to Nozzle with strip facing
forward, as shown. Align front edges and snap together.
4.Tip Handle Assembly back by pressing Release Pedal on left
side of Lower Chassis and pulling back on Handle Assembly.
5.Take Clean Water Tank to sink area, remove Clean Water
Tank Cap and fill Tank with hot (NOT boiling) tap water
to fill line. Replace Cap securely.
6.Remove SmartMixTM
Formula Tank Assembly from Clean
Water Tank Assembly by grasping bottom with fingers and
sliding it out.
7.Unscrew SmartMixTM
Formula Tank Cap and Insert
Assembly and add BISSELL Floor Cleansing FormulaTM
to
fill line. Reclose Cap tightly.
8.Slide SmartMixTM
bottle back into position in Clean Water
Tank Assembly.
9.Replace Clean Water Tank Assembly. Slide Tank down front
of Handle Assembly until it fits snugly against top of Lower
Chassis. Secure with Clean Water Tank Latch Assembly.
10.Replace Dirty Water Tank Assembly.
11.Select SmartCleanTM
setting.
n
WATER ONLY - Use for gentle cleaning, or for (optional)
rinsing following cleaning.
n
NORMAL - Water and Floor Cleansing FormulaTM
are
mixed to optimize normal cleaning. Use for everyday
dirt and soil conditions.
n
HIGH TRAFFIC - Water and Floor Cleansing FormulaTM
are mixed to optimize heavy cleaning. Use for 
entryways, hallways, heavy soil and stains. This 
setting may require more frequent refilling on the
SmartMixTM
bottle.WAR NING : U s e
o n l y   B I S S E L L   F i b e r
Clea nsing  Formu la™
i n
your  POW ERSTEAM ER.™
Use of  c lea ning  formulas
wh ich  cont ain  le mon 
or  pine  oil  m ay  da mage
th is  a pplia nce   and  v oid  
w a r r a n t y.  Che mica l  spo t
cl e a n e r s   o r   s o l ve n t -
b a s e d   s o i l   re mo v e r s
sh o u l d   n o t   b e   u s e d .
These p roduc ts   may 
rea ct  w ith  the  plast ic
ma ter ials  us ed  in  your
P O W E R S T E A M E R,™
c a u s i n g
cr ac king  or  pi ttin g.Snap Together3.
Bottom Front Edge of
Lower ChassisBare Floor
Cleaning
Tool