Bisell Steam and Sweep 57F4 User Manual

2Thank You
USER'S GUIDE
57F4 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingReplacement Parts
3
4
5
6-8
9
10
10
Additional Accessories
Warranty
Consumer Services10
11
12 

www.bissell.com 
Thanks for buying a BISSELL Steam & Sweep
We’re glad you purchased a BISSELL Steam & Sweep. Everything we 
know about floor care went into the design and construction of this 
complete, high-tech home cleaning system.
Your Steam & Sweep is well made, and we back it with a limited two 
year warranty. We also stand behind it with a knowledgeable, dedicat-
ed Consumer Services department, so, should you ever have a prob-
lem, you’ll receive fast, considerate assistance.
My great-grandfather...

www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
Read all instRuctions 
befoRe using steam & sWeep.
 Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before 
conducting maintenance or troubleshooting. 
    W aRning: to  
reduce the risk of fire, electric 
shock, or injury:
■  Use indoors only
■  Do not immerse
■  Use only on surfaces moistened by cleaning 
process
■...

www.bissell.com 4
Handle
Power   
Cord
Brush Switch
Ready Light Power Switch
Maneuverable 
Swivel Head
Mop Pad Filter Water Tank
Quick Release
™ 
 
Cord Wrap
Product view
Dirt Bin  
Release Pedal  

www.bissell.com 
Assembly 
Your steam & sweep assembles 
quickly and easily. the only tool you 
will need for assembly is a phillips 
head screwdriver.
Your steam & sweep is packaged with 
the following items:
Handle assembly
lower body with Water purification 
system
maneuverable swivel Head
Removable Water tank
1 large phillips Head screw
1 small phillips Head screw
2 mop pads
attach handle to steam & sweep
1. Attach lower body to maneuverable 
swivel head (If your Steam & Sweep 
came with the swivel...

Operations
6
special features
Removable water tank 
The water tank is located on the back of 
the Steam & Sweep. It can be refilled with 
water any time during use. Distilled or 
demineralized water is recommended in 
place of tap water.  
do not use chemicals with your 
steam & sweep.
Water purification system  
This filter removes minerals and other 
impurities from tap water, preventing water 
deposits from damaging your Steam & 
Sweep. It should be replaced when the 
bright green grains turn blue. To...

www.bissell.com 7
Operations
getting ready continued
d. Replace the insert assembly and cap, 
tighten until snug.
e.  Replace the water tank by lining up 
the vertical guides and gently sliding it 
back into place.
3.  Twist the quick release cord wrap  
clockwise to unwrap the power cord  
completely, make sure both switches are 
in the off position and plug it into a 
proper outlet.
4.  Turn power button on. The ready light will 
illuminate when the Steam & Sweep is 
ready for use.
note: upon first use...

www.bissell.com
Operations
steam cleaning hard floors
Your steam & sweep is designed to 
clean hard flooring such as ceramic 
tile, vinyl, marble, stone and sealed 
hard wood floors. use of your 
steam & sweep on waxed or some 
unwaxed floors may result in a 
diminished glossiness. the steam & 
sweep is not for use on unsealed 
wood floors. ensure that the steam 
& sweep is throughly tested in an 
inconspicuous area prior to clean-
ing a large floor area. also be sure 
to check the care instructions from...

www.bissell.com 9
Maintenance and care
Power Switch
When you’re done
1.  make sure both power switches are in the off position. Unplug power cord 
from outlet.
2.  Carefully remove mop pad from 
swivel head, as mop pad and lower 
assembly will be hot.
3.  Any water remaining in the water 
tank should be emptied prior to 
machine storage.
4.  mop pad can be machine washed in  warm water with mild detergent. Do 
not use bleach or fabric softeners. for 
best results, air dry.
5.  Wrap power cord around...

www.bissell.com 
Troubleshooting
10Reduced steam or no steam 
possible causes 
Remedies
1. Water tank is empty  1.  fill water tank
2.  Depleted water filter  2. Replace filter
3.  Blocked steam nozzle  3. Refer to note in the middle of page 9.
other maintenance or service not included in the manual should be   
performed by an authorized service representative.
thank you for selecting a bissell product.note: there are no serviceable parts in the upper housing of this product.
please do not return this...