Bisell Steam and Sweep 42A8E User Manual

							Includes 2 Microfibre Mop Pads with Microban™  
Antibacterial Protection
2Thank You
USER'S GUIDE
42A8-E SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingReplacement Parts
3
4
5
6-8
9
10
10
Additional Accessories
Warranty
Consumer Care10
11
12
™ 
						

							www.bissell.com 
Thanks for buying a BISSELL Steam&Sweep Hard Floor Cleaner
We’re glad you purchased a BISSELL Steam&Sweep Hard Floor Cleaner. 
Everything we know about floor care went into the design and construction 
of this complete, high-tech home cleaning system.
Your Steam&Sweep Hard Floor Cleaner is well made, and we back it with a 
limited two year warranty. We also stand behind it with a knowledgeable, 
dedicated Consumer Care department, so, should you ever have a  
problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL 
is a global leader in the design, manufacture, and service of high quality 
homecare products like your Steam&Sweep Hard Floor Cleaner.
Thanks again, from all  of us at BISSELL.
Mark J. Bissell  
Chairman & CEO
 2  
						

							www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
Read all InstRuctIons 
befoRe usIng steam&sWeep.
 Always connect to a properly Earthed outlet. Unplug from outlet when not in use and before 
conducting maintenance or troubleshooting. 
    W aRnIng: to  
reduce the risk of fire, electric 
shock, or injury:
■  Use indoors only
■  Do not immerse
■  Use only on surfaces moistened by cleaning 
process
■  Do not leave machine when it is plugged in
■  Do not service machine when it is plugged in
■  If the supply cord is damaged, it must be 
replaced by the manufacturer or its service 
agent in order to avoid a hazard
■  Do not use machine if it has been dropped, 
damaged, left outdoors or dropped into water
■  Do not expose to rain, store indoors 
■  Do not pull or carry by cord, use cord as a 
handle, close door on cord, pull cord around 
sharp corners or edges, run appliance over 
cord, or expose cord to heated surfaces
■  Do not carry the appliance while in use
■  Do not unplug by pulling on cord; unplug 
by grasping plug not the cord
■  Do not handle plug or appliance with wet 
hands
■  Do not put any object into appliance openings, 
use with blocked opening or restrict air flow
■  Do not expose hair, loose clothing, fingers or 
body parts to openings or moving parts
■  Do not pick up hot or burning objects
■  Do not pick up flammable or combustible materi-
als (lighter fluid, petrol, kerosene, etc.) or use in  
the presence of explosive liquids or vapours
■  Do not use appliance in an enclosed space filled  
with vapours given off by oil base paint, paint  
thinner, some moth proofing substances, flam-
mable dust, or other explosive or toxic vapours
■  Remove plug from electrical outlet before 
cleaning or maintaining the appliance
■  Do not run appliance over supply cord. A 
hazard may occur if the appliance runs 
over the supply cord ■
 Not intended for use by persons (including chil-
dren) with reduced physical, sensory or mental 
capabilities, or lack of experience and knowl-
edge, unless they have been given supervision 
or instruction concerning use of the appliance 
by a person responsible for their safety
■  Young children should be supervised to ensure 
that they do not play with the appliance
■  Do not pick up toxic material (chlorine bleach, 
ammonia, drain cleaner, petrol, etc.)
■  Do not modify the Earthed plug
■  Do not allow to be used as a toy
■  Do not use for any purpose other than 
described in this User’s Guide
■  Use only manufacturer’s recommended 
attachments
■  Use only cleaning products formulated by 
BISSELL for use in this appliance to prevent inter -
nal component damage
■  Keep openings free of dust, lint, hair, etc.
■  Keep appliance on a level surface
■  Turn off all controls before unplugging
■  Be extra careful when cleaning stairs
■  Liquid or steam must not be directed towards 
equipment containing electrical components
■  Pay close attention when working around children
sa Ve tHese   
InstRuctIons.
ThIS MoDEL IS foR hoUSEhoLD   
USE oNLY . 
WaRnIng: This 
appliance must be Earthed.
The symbol  means WARNING: 
Danger of scalding.
Surface may be hot. Avoid contact.
ImpoRtant foR 
oPERATIoN oN A 220-240 VoLT A.C. 
50/60 hz PoWER SUPPLY oNLY. 
If your appliance is fitted with a nonrewireable BS 
1363 plug it must not be used unless a 13 amp 
(ASTA approved to BS 1362) fuse is fitted in the car -
rier contained in the plug. Spares may be obtained 
from your BISSELL supplier. If for any reason the plug 
is cut off, it must be disposed of, as it is an electric 
shock hazard should it be inserted into a 13 amp 
socket.  
						

							www.bissell.com 4
Handle
Power   
Cord
Brush 
Switch
Ready 
Light Power 
Switch
Manoeuvrable 
Swivel Head Filter Water 
Tank
Quick 
Release
™ 
 
Cord 
Wrap
Product view
Dirt Bin  
Release Pedal
Includes 2 Microfibre Mop Pads  with Microban™  
Antibacterial Protection
Bacteria Build-Up on Non-Microban  (left) vs. Microban Mop Pad (right)
In between uses, bacteria can quickly 
multiply in number on an unprotected 
steam mop pad. Microban®  
antibacterial protection helps prevent   
the growth of 99.9% of harmful  
bacteria on the pad surface. And 
because Microban technology works   
continuously, your pad will now stay 
cleaner and fresher between uses.
This information is based upon standard laboratory tests and is 
provided for comparative purposes to substantiate antimicrobial 
activity for non-public health applications. Microban® technology 
is not designed to replace regular cleaning practices or protect 
users from disease causing microorganisms. Antimicrobial action 
limited to product surfaces. 
MICROBAN is a registered trademark of Microban Products 
Company.  
						

							www.bissell.com 
Assembly 
Your Steam&Sweep hard floor Cleaner 
assembles quickly and easily. The only  
tool you will need for assembly is a Phillips 
head screwdriver.
Your steam&sweep is packaged  
with the following items:
Handle assembly
lower body with Water purification 
system
manoeuvrable swivel Head
Removable Water t ank
1 large phillips Head screw
1 small phillips Head screw
2 mop pads
attach handle to steam&sweep 
Hard floor cleaner
1. Attach lower body to manoeuvrable 
swivel head (If your Steam&Sweep came 
with the swivel head already assembled 
to the body, you may skip  
this step).
2. Secure manoeuvrable swivel head  
with small Phillips head screw. Tighten 
until secure.
3. Slide handle assembly down into lower 
body until it will go no further.
4. Secure the handle by placing the large 
Phillips head screw through the screw 
opening in the lower body and into the 
rear of the handle assembly. Tighten with 
screwdriver until secure.
5. Slide water tank onto lower body by  
lining up vertical glides and gently  
sliding tank into place.
Steam&Sweep assembly is now complete.
1.
3.
5. 4.2.
5  
						

							6www.bissell.com
Operations
special features
Removable water tank The water tank is located on the back of 
the Steam&Sweep.  It can be refilled with 
water any time during use. Distilled or 
demineralized water is recommended in 
place of tap water. 
do not use chemicals with your 
steam&sweep.
Water purification system  This filter removes minerals and other 
impurities from tap water, preventing 
water deposits from damaging your 
Steam&Sweep. It should be replaced 
when the bright green grains turn blue. 
To maximize performance of the filter, dis-
tilled water should be used.
Ready light  The ready light will glow when water 
has been converted to steam and the 
Steam&Sweep is ready to use.
steam on demand trigger  Press to release steam.
manoeuvrable swivel head  Allows you to pick up dust and small 
debris while steam cleaning your floor.  
The manoeuvrable swivel head gets into 
tight spaces and under cabinets.
microfibre mop pads  These washable, reusable microfibre pads 
feature buit-in Microban® antibacterial   
protection to help prevent the growth of 
99.9% of harmful bacteria on the pad sur -
face to keep your pad fresher between uses..
getting ready
1.  The mop pad may have already come 
attached to the swivel head. If not, attach 
mop pad to swivel head using the Velcro 
strips.
2.  fill the water tank.
a.  Remove the tank by lifting straight up 
and away from the unit.
b.  Unscrew the cap at the bottom of 
the water tank and remove the insert 
assembly.
Tip:
To prevent damage to the machine, 
do not attempt to use your 
Steam&Sweep without water in   
the tank.
2a.2b.  
						

							www.bissell.com 7
Operations
c. fill the water tank with water. for  
best results, water should be at room 
temperature.
d.  Replace the insert assembly and cap, 
tighten until snug.
e.  Replace the water tank by lining up 
the vertical guides and gently sliding it 
back into place.
3.  Twist the quick release cord wrap  
clockwise to unwrap the power cord  
completely, make sure both switches are 
in the "off" position and plug it into a 
proper outlet.
4.  Turn power button on. The ready light 
will illuminate when the Steam&Sweep is 
ready for use.
note: upon first use of the 
steam&sweep or first use of a 
new filter, the pump may make a 
“knocking” sound while the filter 
fills with water. this sound is normal 
and may last a couple of minutes. 
continue to depress the trigger until 
the knocking sound subsides and 
the unit emits steam. If the sound 
continues, please make sure the 
tanks are firmly secured.”
before you clean
The Steam&Sweep can be used as a sweeper 
and a steam mop at the same time. for best 
results, use the Steam&Sweep's powerful sweep-
er to clear floor of dust and small debris before 
mopping. 
1.  Turn the brush switch to the on ( I )  
position to activate the brush.
2.  To empty the dirt container, turn the   
power off, gently tap the release   
pedal on the swivel head. Lift unit   
straight up leaving bin on floor and   
empty into a trash can. The dirt   
container may be warm to the touch. 
3.  Replace the dirt container by pushing  
it back into the swivel head until it  
snaps back into place.
WaRnIng: Steam&Sweep will not pick up 
crayons, marbles, and other 
large objects.
2e.
2d.
1.
2.
Power SwitchBrush Switch
Dirt Bin  
Release Pedal  
						

							www.bissell.com
Operations
8
steam cleaning hard floors
Your Steam&Sweep is designed to clean 
hard flooring such as ceramic tile, vinyl, 
marble, stone and sealed hard wood 
floors. Use of your Steam&Sweep on 
waxed or some unwaxed floors may 
result in a diminished glossiness. The 
Steam&Sweep is not for use on unsealed 
wood floors. Ensure that the Steam&Sweep 
is throughly tested in an inconspicuous 
area prior to cleaning a large floor area. 
Also be sure to check the care instructions 
from your flooring manufacturer. 
1. When the ready light illuminates, 
begin cleaning by slowly passing 
over the surface while pressing the 
steam on demand trigger to emit 
steam as needed.
2.  To sanitize an area of your floor, 
(attack invisible germs and bacteria) 
leave the Steam&Sweep over the area 
for a minimum of 15 seconds using 
continuous steam, but no longer than 
20 seconds. for larger areas, overlap 
swivel head placement.
3.  When the Steam&Sweep stops emit-
ting steam, turn the unit off. Simply 
remove the water tank, refill, and 
continue cleaning.
note: upon first use of this   
steam product or first use of   
a new filter, the pump may   
make a "knocking" sound while 
the filter fills with water. this 
sound is normal and may last 
up to one minute. continue to 
depress the trigger until the 
knocking sound subsides and   
the unit emits steam.
W aRnIng: Never put descaling aromatic, 
alcoholic, or detergent products 
into the steam cleaner, as this 
may damage it or make it unsafe 
for use.
Tip :
The Steam&Sweep may be used as 
both a steam mop and a sweeper at 
the same time.
cautIon:  Exercise extreme care when using 
the Steam&Sweep on timber floor-
ing. Ensure the Steam&Sweep is 
thoroughly tested in an inconspicu-
ous area prior to mopping a large 
floor area. The Steam&Sweep 
generates hot steam, so when 
depressing the trigger to apply 
steam, ensure the Steam&Sweep 
is moving continuously. The trigger 
does not need to be depressed at 
all times. Prolonged application 
of steam in one area increases 
the risk of damage to the surface 
treatment on timber floors. Check 
with your timber floor treatment 
and application specialist prior to 
team&Sweep operation. Regular 
foot traffic and direct sunlight will 
wear down timber floor surface 
treatment, making it more suscep-
tible to steam damage. Exercise 
extreme care when using the 
Steam&Sweep on timber flooring.  
						

							www.bissell.com 9
Maintenance and care
When you’re done
1. Make sure both power switches are 
in the off (o)position. Unplug power 
cord from outlet.
2.  Carefully remove mop pad from 
swivel head, as mop pad and lower 
assembly will be hot.
3.  Any water remaining in the water 
tank should be emptied prior to 
machine storage.
4.  Mop pad can be machine washed in 
warm water with mild detergent. Do 
not use bleach or fabric softeners. for 
best results, air dry.
5.  Wrap power cord around quick 
release cord wrap on side of Steam  
& Sweep.
6.  Wipe all surfaces of Steam&Sweep 
with a soft cloth. Store upright in a 
protected, dry area.
note: If steam output is reduced, 
the nozzle may be blocked.  t o 
remedy, unplug the unit, remove 
the swivel head from the lower 
body and pour vinegar through 
the center tube of the swivel 
head “neck”.  clear the nozzle 
by inserting a paper clip into the 
brass spray tip located in the 
bottom of the lower body.
 
If you fill your Steam&Sweep cleaner with 
normal tap water, it is essential to check 
the filter and replace it when it is no longer 
effective. Change the filter when the bright 
green grains turn blue. If the filter is not 
changed at the appropriate time, calcium 
deposits will accumulate on the heating 
element, causing damage or reduced per -
formance.
To replace the filter, pull it up and away 
from the Steam&Sweep. 
Using distilled or demineralized water will 
maximize the performance of your filter.
To order a replacement filter, refer to the 
replacement parts section on page 10.
cautIon: Upright storage of the 
Steam&Sweep with a wet mop 
pad may result in the formation 
of white marks on your floor. To 
remove the white marks, clean 
area with vinegar.
Tip :
Using distilled or demineralized 
water will maximize the performance 
of your filter.
Tip :
Be sure to use only a BISSELL water 
filter in your Steam&Sweep.
Replacing the water purification system  
						

							www.bissell.com 
Troubleshooting
10Reduced steam or no steam 
possible causes 
Remedies
1. Water tank is empty  1.  fill water tank
2.  Depleted water filter  2. Replace filter
3.  Blocked steam nozzle  3. Refer to note in the middle of page 9.
other maintenance or service not included in the manual should be   
performed by an authorized service representative.
thank you for selecting a bIssell product.note: there are no serviceable parts in the upper housing of this product.
please do not return this product to the store.             
Replacement parts - BISSELL Steam&Sweep
12 34 
Item Part No.  Part Name
1 218-5600  Water filter
2  203-2246  handle assembly with screw
3   203-2243 Water tank with cap and insert
4  203-2168  Storage hook with screws
1  
Item  part no.  part name
1 
8724  Microfibre mop pads – 2 pack
Additional accessories