Bisell Ready Dry 79T3 User Manual

							USER’S GUIDE
79T3 SERIES 220-240v
3Safety Instructions
Product v iew
Special Features Assembly
Operation
Maintenance and Care
Troubleshooting
Consumer Services
Formulas
 Additional Accessories Replacement Parts
4
6 5
7-10
10-11
12
13
14
15 14
Warranty
16
ReadyDry™  
						

							2
Thank you for buying a BISSELL ReadyDry 
 2www.bissell.com 
We’re glad you purchased a BISSELL ReadyDry carpet washer. Everything we  
know about floor care went into the design and construction of this complete, 
high-tech home cleaning system.  By purchasing this product you are helping 
BISSELL with our commitment to reducing our impact on the environment through 
an expanding range of sustainable design efforts.
Your carpet washer is well made, and we back it with a limited two-year warranty. We 
also stand behind it with a knowledgeable, dedicated Consumer Services department, 
so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a 
global leader in the design, manufacture, and service of high quality homecare 
products like your ReadyDry.
Thanks again, from all of us at BISSELL. 
Mark J. Bissell
President and Chief Executive Officer 
						

							 3www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic  
precautions should be observed, including   
the following: 
R EAD  ALL  INSTRUCTIONS 
BEFORE  USING YOUR 
C ARPET  WAShER. 
Always connect to a properly Earthed 
outlet. Unplug from outlet when not in 
use and before conducting   
maintenance or troubleshooting. 
     WARNING: To reduce the 
risk of fire, electric shock, or injury:
■     Use indoors only
■    
Do not immerse; use only on surfaces moistened 
by cleaning process
■     Do not leave machine when it is plugged in
■    
Do not service machine when it is plugged in
■   If the supply cord is damaged, it must be replaced 
by the manufacturer or its service agent in order 
to avoid a hazard
■     Do not use machine if it has been dropped,   
damaged, left outdoors or dropped into water
■    
Do not pull or carry by cord, use cord as a   
handle, close door on cord, pull cord around sharp 
corners or edges, run appliance over cord, or 
expose cord to heated surfaces
■     Do not carry the appliance while in use
■    
Do not unplug by pulling on cord; unplug by 
grasping plug not the cord
■     Do not handle plug or appliance with wet hands
■    
Do not put any object into appliance openings, use 
with blocked opening or restrict air flow
■     Do not expose hair, loose clothing, fingers or body 
parts to openings or moving parts
■     Do not pick up hot or burning objects
■    
Do not pick up flammable or combustible   
materials (lighter fluid, petrol, kerosene, etc.) or use 
in the presence of explosive liquids or vapours
■      Do not use appliance in an enclosed space filled with 
vapours given off by oil base paint, paint   
thinner, some moth proofing substances,   
flammable dust, or other explosive or toxic vapours
■     Remove plug from electrical outlet before cleaning 
or maintaining the appliance ■
    Not intended for use by persons (including   
children) with reduced sensory or mental capabilities, 
or lack of experience and knowledge, unless they 
have been given supervision or instruction concerning 
use of the appliance by a person responsible for 
their safety
■     Young children should be supervised to ensure 
that they do not play with the appliance
■     Do not pick up toxic material (chlorine bleach, 
ammonia, drain cleaner, petrol, etc.)
■     Do not modify the Earthed plug
■    
Do not use for any purpose other than described 
in this User’s Guide
■     Use only manufacturer’s recommended   
 attachments
■    
Use only cleaning products formulated by   
BISSELL for use in this appliance to prevent   
internal component damage
■    
Keep openings free of dust, lint, hair, etc.
■    
Keep appliance on a level surface
■    
Turn off all controls before unplugging
■    
Be extra careful when cleaning stairs
■    
Pay close attention when working   
around children
SA vE T hESE   
INSTRUCTIONS.
ThIS moDEL  IS foR hoUSEhoLD  USE oNLY. 
  WARNING: This appliance must 
be Earthed.
IMPORTANT foR  oPERATIoN  oN  
A 220-240 VoLT A.C. 50/60  hz PoWER  
SUPPLY  oNLY. 
If your appliance is fitted with a nonrewireable 
BS 1363 plug it must not be used unless a 13 
amp (ASTA approved to BS 1362) fuse is fitted in 
the carrier contained in the plug. Spares may be 
obtained from your BISSELL supplier. If for any   
reason the plug is cut off, it must be disposed 
of, as it is an electric shock hazard should it be 
inserted into a 13 amp socket. 
						

							 4www.bissell.com 
Product view
ReadyTools™  
Dial
Clean Water/
Formula Tank
PowerRoller
Oxy Gen2™ 
 
PowerTool
Lower Body  
Assembly
Handle Assembly
Easy Carry   
Handle
Quick Release
™ 
 
Cord Wrap
Power Cord
Power Switch
Spray Trigger
Cleaning formula 
Keep plenty of genuine BISSELL Fiber Cleansing Formula™ on hand so you can wash and protect 
whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.  Non-BISSELL 
cleaning solutions may harm the machine and will void the warranty.
WARNING:   To reduce the risk of fire and electric   
shock due to internal component damage,  use 
only BISSELL cleaning formulas intended for 
use with the carpet washer.  Non-BISSELL 
cleaning solutions may harm the machine 
and void the warranty.
Large,   
Easy-To-Maneuver   
Wheels
Dirty Water  
Tank
Ready-to-Use Hose
Hose Secure Latch
Tough Stain Tool
Upper Hose Wrap
Handle Release
BISSELL   
Fiber Cleansing Formula™ with 
Scotchgard™ 
Protector  BISSELL 
 
Multi- Allergen 
Removal
™ Formula 
with Scotchgard™ 
Protector BISSELL 
 
Pet Odor and   
Soil Removal
™ 
Formula with 
Scotchgard™ 
Protector BISSELL 
 
Natural Orange 
Extract Formula  
with Scotchgard
™   
Protector BISSELL 
 
Oxy Gen2 
BISSELL
 
Lavender Essence 
Formula  
with 
Scotchgard™ 
Protector BISSELL 
 
Tough Stain   
Pre-cleaner™ 
						

							 5www.bissell.com 
This user’s guide has been designed to help 
you get the maximum satisfaction from your 
ReadyDry carpet washer. You’ll find assembly 
and operating instructions, safety precautions, 
as well as maintenance and troubleshooting 
instructions. Please read this user’s guide 
thoroughly before assembling your carpet 
washer. 
Your carpet washer comes in three easy to  
assemble components:
•	 Handle	 assembly
•	 Upper	 hose	wrap
•	 Lower	 body	assembly
Four Phillips head screws are included and can 
be found taped to the handle assembly.
The only tool you will need to assemble your 
ReadyDry is a Phillips head screwdriver.
1.  Slide upper handle into lower body assembly 
and secure with 2 screws.
2.  Attach upper hose wrap using 2 screws.
3.  Wrap hose clockwise around the upper and 
lower hose wraps as shown on page 4. Be 
sure to properly secure grip into the notched 
holder.
4.  Keep hose locked in place with the   
secure latch.  
5.  Wrap the power cord as shown on page 4.
6.  Place Oxy Gen2 PowerTool in the center tool 
caddy and the tough stain tool on the hose 
wand.
how to use this guide
Assembly
WARNING:   Do not plug in your carpet 
washer until you have 
completely  assembled it 
per the following instructions  
and are familiar with all 
instructions and operating 
procedures.
1.
2a.
2b.
Tip: Regular carpet cleaning   
can reduce dust and allergens in   
your home.
Upper Hose 
Wrap Screws
Upper Handle 
Screws 
						

							Your BISSELL ReadyDry carpet washer is a 
home cleaning system that uses a combination 
of hand hot tap water, BISSELL advanced cleaning 
formula, the innovative PowerRoller and suction 
to safely wash carpet and area rugs.
PowerRoller
The PowerRoller is designed for great cleaning 
performance with fast drying results. It traps, lifts 
and  removes dirt and debris. Unlike   
traditional carpet washers, where cleaning 
solution is sprayed directly into the carpet, the 
PowerRoller absorbs the majority of the spray 
from the machine, meaning your carpet and 
area rugs get cleaned and revitalized, while still 
allowing you to get back on them in less than 30 
minutes. When in the upright position for storage 
or tool use, the PowerRoller is lifted off the floor 
surface and held in place. This will also help the 
PowerRoller dry between uses. The PowerRoller 
can be washed or replaced as needed.
ReadyTools™ Dial
The ReadyTools feature allows you to choose 
between FLOOR CLEANING or cleaning with TOOLS 
simply by turning the dial. The TOOLS setting 
allows for above floor cleaning of upholstery, 
stairs, creases along baseboards and other hard 
to reach areas. Simply choose the tool that is 
appropriate for the job, attach it to the flexible 
hose and you are ready to go.
Oxy Gen2 PowerTool
The Oxy Gen2 PowerTool is an advanced stain 
fighting tool. By adding Oxy Gen2 multi-purpose 
formula to the tool, tough stains such as coffee, 
juice, cola and red wine are easier to clean up. 
The tool can store ready to use with the   
Oxy Gen2 formula in it.
Easy carry handle
Located in the back of the machine, the easy carry 
handle makes it easy to carry the machine. Refer to 
page 4 for location.
Special features of your BISSELL ReadyDry
 6www.bissell.com 
W ARNING:
To reduce the risk of fire, use only 
BISSELL advanced deep cleaning  
formula for full size machines in your  
carpet washer. Use of cleaning    
formulas that contain lemon or  
pine oil may damage this appliance 
and void the warranty. Chemical 
spot cleaners or solvent-based soil 
removers should not be used. These 
products may react with the plastic 
materials used in your carpet washer   causing cracking or pitting.  
						

							Before you clean
1. If desired, move furniture to another area if 
cleaning an entire room.
2.  vacuum area with a dry vacuum cleaner 
before cleaning.
3.  Plan your cleaning route to leave an exit 
path. It is best to begin cleaning the corner 
farthest from your exit.
Fill the clean water/formula tank
1. Remove the clean water/formula tank from the 
base of the machine by pulling up and out from 
the back. You can also detent the handle and 
pull the tank straight up if you desire.
2.  Unscrew the black cap and red insert. Remove 
and set aside.
3.  Fill the tank up to the FILL LINE with hand 
hot tap water.
4.  Add 3 ounces of formula (always use   
genuine BISSELL formulas to maximize 
cleaning and for the safety of your machine). 
5.  Replace the cap and insert and tighten by 
turning clockwise.
6.  Replace the clean water/formula tank back 
into the machine. Be sure that the cap is 
seated in the receiver.
Carpet washing
1. Make sure the ReadyTools Dial is in the 
FLOOR CLEANING position.
2.  Plug the ReadyDry into the proper outlet and 
turn the power on using the switch in the 
back.
3.  With your foot, press the gray handle release 
lever located on the back of the unit. Take 
care to notice the way the machine floats 
forward.
4.  While pressing the spray trigger make one   
forward wet pass and another one back. 
Repeat once and move on to the next   
section of carpet or area rug to be washed. 
Take care not to run over loose objects of 
the edges of area rugs.
 7www.bissell.com 
2
4313
4
567
9101112EXIT
ST AR T
HERE
Operation
Tip: Thorough vacuuming 
before carpet washing will prevent 
early clogging of the lint screen. 
						

							8www.bissell.com 
Operation
Empty the dirty water tank
1. When the dirty water tank level reaches the FULL line, 
when the float trips or when finished carpet washing, 
turn power switch off.
2.  Remove dirty water tank by lifting straight up. 
Carry it to the sink or wherever you plan to 
dump the dirty water.
3.  Remove the tethered cap on the rear of   
the tank.
4.  Pour out the dirty water, rinse tank and replace   
the cap.  
5.  To continue carpet washing refer back to page 
7 and begin with "Fill the clean water/formula 
tank."
If carpet washing is complete, refer to the 
“Maintenance and care” section on page 11.
Pretreating (optional)
1.  Pretreating (optional)Pretreating is recommended to improve cleaning 
effectiveness for heavily soiled carpet in high traffic 
areas such as entry ways and hallways. Please keep 
in mind that pretreating will wet the carpet and could 
impact dry time.
To pretreat:
A. Using the BISSELL Tough Stain   
Pre-cleaner, generously spray evenly over 
soiled area,  do not overwet.
B.  Wait 3-5 minutes before carpet washing.
C.  Clean as normal using your BISSELL ReadyDry, 
following the instructions on page 7.
ReadyTools™ (cleaning with attachments)
Your ReadyDry carpet washer comes equipped 
with a hose and at least two attachments for 
cleaning stairs, upholstery, stains and more.
Important! If using the machine to clean 
upholstery, check upholstery tags.
1.  Check manufacturer’s tag before cleaning. “W” 
or “WS” on the tag means you can use your 
ReadyDry. If the tag is coded with “X” or “S” 
(with a diagonal strike through), or says “Dry 
Clean Only,” do not proceed. Do not use on 
velvet or silk. If manufacturer’s tag is missing 
or not coded, check with your furniture dealer. 
WARNING:   To reduce the risk of fire 
and electric shock due to 
internal component   
damage, use only BISSELL 
cleaning fluids intended for 
use with the carpet washer. 
Non-BISSELL cleaning   
solutions may harm the 
machine and void   
the warranty.
Manufacturer’s tag 
						

							9www.bissell.com 
ReadyTools™ (continued)
2. Check for colorfastness in an inconspicuous 
place. 
3.  If possible, check upholstery stuffing. 
Colored stuffing may bleed through fabric 
when wet.
4.  Plan activities to give upholstery time to dry.
5.  Vacuum thoroughly to pick up loose debris and 
pet hair. Use a vacuum with a brush attachment 
and a crevice tool to clean in fabric folds and tufts.
6.  To start cleaning with attachments, follow 
the instructions on page 7, beginning with 
"Fill the clean water/formula tank".
7.  Set the ReadyTools dial to the TOOLS setting. 
This will allow for suction from the hose. 
8.  Attach the desired cleaning tool to the end of 
the hose.
9.  Clean by pressing the spray trigger to spray   
cleaning solution onto the area to be 
cleaned. Slowly move the tool back and forth 
over the soiled surface. Release the spray 
trigger to suction dirty water. Continue to 
clean in the area, working in small sections, 
until dirt is removed.   
Caution: Do Not Overwet.
10.  When finished cleaning, remove and rinse 
the tool(s) in clean, running water.  
11.  It is recommended that you suction clean 
water from the tap to rinse out the hose. 
12.  Before wrapping hose onto tool rack, lift end 
of hose and stretch out to ensure all water is 
cleared from hose.
13.  Wrap hose around tool rack.
14.  Empty dirty water tank and rinse out,   
following instructions on page 8.
15.  If the ReadyTools dial becomes difficult to 
turn, the diverter assembly that holds the dial 
may need to be cleaned. To clean, flush hot 
water through the nozzle. Make sure the dial 
is set to FLOOR CLEANING.
Operation 
						

							10www.bissell.com 
Oxy Gen2™ PowerTool
To use the Oxy Gen2 PowerTool:
1. Pull out the rubber stopper in the tank.
2.  Fill with Oxy Gen2
™ formula. 
3.  Replace the rubber stopper and attach the 
tool to the hose grip.
4.  Refer to page 9 “ReadyTools” steps 9-10.
Machine care
For best results, a few simple steps can assure 
your carpet washer is well maintained after your 
cleaning is complete.
1. Turn power switch off. Unplug the machine 
and wrap the power cord. 
2.  After emptying the dirty water tank, rinse it 
with running hand hot tap water, taking care 
to clean all around the interior. 
3.  If necessary, check and clean out the lint screen 
after each use by wiping clean any visible residue.
4.  Replace the dirty water tank back into the machine.
5.  Any loose hair or debris can be pulled from 
the PowerRoller and thrown away.  
6.  To clean the attachments, remove from hose 
and rinse in clean, running water. Dry before 
storing. Clean the hose by suctioning clean 
water from the tap. Before wrapping back on 
machine, lift end of hose and stretch out to 
ensure all water is cleared from hose.
7.  Wipe the machine’s exterior with a soft cloth.
8.  Machine Storage: Allow PowerRoller to dry 
completely before storing. Put the unit away 
in a closet or basement for the next use. 
Store in a protected, dry area. Since this 
product uses water, it must not be stored 
where there is a danger of freezing. Freezing 
will damage internal components and void 
the warranty.
Operation
Maintenance and care
Lint Screen Rubber Stopper