Bisell QuickWash Deluxe 68W6e User Manual

2Thank You
USER'S GUIDE
68W6 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
GuaranteeTroubleshooting
Consumer Care3
4
5
6-10 11
15 12
16
Replacement Parts
Accessories13
14
DELUXE
QUICKwash
™   

www.bissell.com 
Thanks for buying a BISSELL deep cleaner
We’re glad you purchased a BISSELL deep cleaner. Everything we 
know about floor care went into the design and construction of 
this complete, high-tech home cleaning system.
Your BISSELL deep cleaner is well made, and we back it with a  
limited two year guarantee. We also stand behind it with a  
knowledgeable, dedicated Consumer Care department, so, should 
you ever have a problem, you’ll receive fast, considerate assis-
tance.
My...

www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
Read all instRuctions befoRe 
using youR deep cleaneR.
W aRning: 
to reduce the risk of fire, 
electric shock, or injury:
  
■    Do not leave appliance when plugged in.
■   Unplug from electrical socket when not in use 
and before servicing.
■   Do not modify earthed plug.
■   Use indoors only.
■   Do not allow to be used as a toy.
■   This appliance can...

Removable 
Nozzle
www.bissell.com 4
Product view
WarnIng: To reduce the risk of fire and 
electric shock due to internal 
component damage, use only 
BISSELL cleaning formulas 
intended for use with the  
deep cleaner. 
Tough Stain 
Tool
Spray Trigger
Power Cord Hose 
 
Wrap
Hose   
Collection 
Tank Latch
Cleaning formula:
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can clean and   
protect whenever it fits your schedule. Always use genuine BISSELL deep \
cleaning formulas....

www.bissell.com 
Assembly 5
Your deep cleaner assembles quickly 
and easily. The only tool you will   
need for assembly is a Phillips head 
screwdriver.
1.  Slide upper body onto lower body.
2.  Secure with screws.
3.  Attach hose wrap to upper handle by 
sliding it up the bottom of the handle 
until it snaps firmly in place.
4.  Slide upper handle into upper body,  
until it will not go any further and  
secure with screw.
5.  Place solution tank on back of unit.
6.  Wrap power cord and flex hose.
7....

www.bissell.com 
Operations 
6
Special features
Your BISSELL deep cleaner is a home 
cleaning system that uses a combina-
tion of hand hot tap water, BISSELL 
cleaning formula, brush agitation and 
suction to safely clean carpets.
DirtLifter
™ Powerbrush
The DirtLifter PowerBrush is designed to 
enhance cleaning performance. The bristle   
pattern safely lifts out the deep down dirt while 
gently grooming carpet fibers. The floating 
suspension self-adjusts to all carpet heights. 
When the power is ON...

www.bissell.com 7
Operations
4. Pretreating (optional) Pretreat stubborn 
stains and highly soiled carpet in hallways 
and other high-traffic areas.
4a.  Generously spray BISSELL Stain Pretreat 
evenly over soiled area.  
Caution: DO nOT OVEr WET CarPET
4b.  Wait 3-5 minutes before deep cleaning.
Fill the tank
1. Remove the solution tank by lifting it straight 
up, then away from the lower body.
2.  Unscrew the black cap at the bottom of 
the solution tank.
3.  Fill with hand hot (60°C/140°F MAX)   
tap...

www.bissell.com 
Operations
8
 2a. Release collection tank latches  
(on each side) by pulling up from the  
bottom of latch and then out. 
 2b.  Carefully remove the top of the  
tank by lifting up on the tank handle.  
3.  Carry collection tank to a toilet or sink.  
To empty, pour out contents using  
opening at back of tank.
4.  Rinse collection tank thoroughly and   
replace on unit.
5.  Refill solution tank and continue cleaning.
Cleaning with attachments 
Your deep cleaner is equipped with a 
hose...

www.bissell.com 9
Operations
5. Plug in and turn the power switch to the   
ON position.
6.  Clean by pressing the spray trigger 
to spray solution onto the area to be 
cleaned. Slowly move the tool back and 
forth over the soiled surface. Release 
the spray trigger to suction dirty water. 
Continue to clean in the area, working 
in small sections, until dirt is removed.
  Caution: Do not Overwet.
7.  When finished cleaning, remove and 
rinse tool(s) in clean, running water.
8.  It is recommended that...

www.bissell.com 
Operations
10
Cleaning after use
1. Unplug the unit.
2.  Rinse collection tank thoroughly.
 2a.  Remove ReadyTools Dial by   
rotating it halfway between “TOOLS” & 
“FLOOR CLEANING.” 
 2b.   Pop out knob by using the opening   
on the back of the tank. Rinse and replace 
knob and collection tank.
3.  Remove tank vent & foam filter (located   
on top of the collection tank) and rinse.
4.  Clean nozzle window by lifting latch   
and removing from machine. Rinse   
under running water. 
5....