Home > Bissell > Cleaner > Bisell PowerWash LiftOff 1190 User Manual

Bisell PowerWash LiftOff 1190 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Bisell PowerWash LiftOff 1190 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 201 Bissell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Operations
    cleaning with Deep Reach™ tool (select models only)
    1.  set tool o\f soiled surfaces a\fd press the   
    spra\b trigger to spra\b solutio\f o\fto the soiled 
    area to be clea\fed. 
    2.  slowl\b move the tool back a\fd forth over the 
    soiled surface, keepi\fg the tool i\f co\ftact with 
    the carpet. 
    Release spra\b trigger a\fd move tool   
    slowl\b over the soiled area to suctio\f up   
    water a\fd dirt. 
    \b. Co\fti\fue to clea\f the area, worki\fg i\f small 
    sectio\fs, u\ftil \fo more dirt ca\f be removed.
    Empty dirty tank
    Follow the i\fstructio\fs u\fder  empt\b dirt\b  
    ta\fk sectio\f o\f page 8 of the Upright clea\fi\fg 
    mode sectio\f. 
    cleaning portable machine 1.  before tur\fi\fg off the machi\fe, suctio\f up 
    clea\f water from a bowl to ri\fse out the i\fterior 
    of the hose. The\f, lift the clea\fi\fg tool a\fd   
    poi\ft it upwards to drai\f a\f\b remai\fi\fg water 
    i\fto the ta\fk. 
    2.  Remove a\fd ri\fse the tools i\f clea\f,   
    ru\f\fi\fg water. Dr\b a\fd replace i\f the tool   
    storage provided.
    3.  Coil flex hose arou\fd the hose wrap a\fd 
    secure with latch.
    \b.  Check suctio\f gate a\fd if it appears dirt\b,   
    follow steps 1-4 u\fder Clea\fi\fg  suctio\f Gate  
    o\f page 12. 
    Replacing portable machine on base1. Alig\f the product as the graphic shows,   
    with the cord side o\f the left a\fd hose side   
    o\f the right. 
    2. Push dow\f the portable spot clea\fer u\ftil   
    \bou hear it click securel\b i\fto place. Test the   
    fit b\b pulli\fg up o\f the carr\b ha\fdle to make 
    sure it is secure.
       
       www.
    bissell.com11
    Graphic
    1.
    1.
    3. 
    						
    							machine care (check regularly)
    cleaning suction gateThe suctio\f gate automaticall\b diverts air whe\f 
    the portable deep clea\fer is detached. This 
    should be checked a\fd clea\fed regularl\b for  
    a\f\b dirt a\fd debris.
    1.  step o\f the pedal a\fd remove the portable 
    spot clea\fer. Remove dirt\b ta\fk.
    2.  Remove two screws a\fd pull off suctio\f   
    gate door.
    3.  Wipe suctio\f gate clea\f a\fd ri\fse suctio\f 
    gate door.
    \b.  Replace suctio\f gate door a\fd two screws.
    cleaning spray tips1. step o\f the pedal a\fd remove the portable 
    spot clea\fer.  
    2.  To remove black spra\b tip, u\flatch tab o\f   
    fro\ft portio\f of spra\b tip from base of machi\fe 
    a\fd pull up a\fd out of red receiver.
    3.  Clea\f b\b ri\fsi\fg u\fder water. 
    \b.  Replace black spra\b tip b\b i\fserti\fg back   
    i\fto red receiver a\fd latchi\fg tab back dow\f 
    i\fto base of machi\fe.
    5.  Repeat steps o\f seco\fd spra\b tip.
    Small belt removal and replacement (as needed)
    Occasio\fal replaceme\ft of o\fe or both belts 
    ma\b become \fecessar\b.  if that is \feeded, please 
    follow the i\fstructio\fs below.
    1.  Tur\f off the machi\fe, a\fd u\fplug it from   
    the outlet. Remove portable spot clea\fer.
    2.  Remove the \fozzle assembl\b from the 
    machi\fe. Refer to step 2 o\f page 9.
    3.  Tur\f the machi\fe o\f its side. 
    ImpoRt ANt: with portable spot cleaning pedal 
    facing down.
    \b.  Remove e\fd cap b\b u\fscrewi\fg the 3 screws. 
    Take care \fot to drop the screws i\fto the u\fit.
    5.  Remove 1 silver screw from the pivot arm.
    6.  Remove pivot arm b\b ge\ftl\b lifti\fg up.
    7.   Remove small brush belt.
    8.  Replace small brush belt, a\fd reverse   
    steps above.
    9.  Ma\fuall\b rotate brushes b\b ha\fd to make   
    sure the\b move freel\b. You ma\b \fotice a slight 
    resista\fce from the motor.
    Maintenance & Care
    www. bissell.com
          12
    WARNING
    To reduce the risk of electric shock, turn power switch 
    off and disconnect plug from electrical outlet before 
    performing maintenance or troubleshooting checks.
    suctio\f 
    Gate
    spra\b 
    Tips
    \b.
    \b. 4.
    6.
    8.
    7. 5. 
    						
    							\frush removal and large belt replacement (as needed) 
    brushes ca\f be removed for clea\fi\fg or  
    replaceme\ft as \feeded. 
    1.  Follow small belt removal  i\fstructio\fs o\f  
    page 12 steps 1-7.
    2.  Remove brush rolls b\b pulli\fg them off of 
    the metal rods.  Be careful not to lose the small 
    washer at each end of the brush rolls.
    3.  Re-attach the large belt to the grooves o\f the 
    e\fd of the \few or clea\fed brush rolls.  if the belt 
    is damaged, replace with a \few belt.
    \b.  Place clea\fed or \few brush rolls back o\fto 
    the rods. Make sure o\fe washer is o\f each e\fd 
    of the rollers prior to slidi\fg o\fto the rod.  be 
    sure the brush is seated completel\b o\f the rod.
    5.  Replace small belt over grooves i\f back roller 
    a\fd metal cog.
    6.  Replace pivot arm a\fd secure with   
    silver screw.
    7.   Re-attach e\fd cap b\b tighte\fi\fg with the   
    (3) black screws.
    8.  Replace the \fozzle assembl\b back o\fto the 
    machi\fe. Refer to step 2 o\f page 9.
    if \bou have a\f\b questio\fs or are havi\fg trouble 
    i\fstalli\fg or replaci\fg \bour belt(s) or brushes, 
    please call  BISSeLL Consumer Care.
    Maintenance & Care
    WARNING
    To reduce the risk of electric shock, turn power switch 
    off and disconnect plug from electrical outlet before 
    performing maintenance or troubleshooting checks.
          www.
    bissell.com13
    \b.
    4.
    6. 3.
    5.
    7.  
    						
    							www.bissell.com
          14
    TroubleshootingWARNING
    To reduce the risk of electric shock, turn power switch 
    off and disconnect plug from electrical outlet before 
    performing maintenance or troubleshooting checks.
    problem possible causes Remedies
    Upright clean-
    ing mode 
    indicator light 
    does not  
    illuminate The power is \fot tur\fed ON 
    The power must be ON to activate 
    the i\fdicator light
    The portable spot clea\fer is \fot 
    attached completel\b Make sure the portable spot clea\fer is 
    attached. Push dow\f firml\b to check.
    Reduced 
    Spray or   
    No Spray Formula & water ta\fk ma\b be empt\b
    Refill ta\fk
    Formula & water ta\fk ma\b \fot be 
    seated completel\b Tur\f power OFF. Remove a\fd 
     
    reseat ta\fk
    Pump ma\b have lost prime i\f   
    portable spot clea\fi\fg mode Hold e\fd of hose below water level 
     
    i\f ta\fk to prime
    The portable spot clea\fer is \fot 
    attached completel\b Push dow\f firml\b to check co\f\fectio\f
    Dirtlifter™ 
    p
    ower\frush 
    does not turn The portable spot clea\fer is \fot 
    attached completel\b
    Make sure the portable spot clea\fer 
    is attached. Push dow\f firml\b to check
    The u\fit is i\f the upright positio\f brushes o\fl\b rotate whe\f u\fit is 
    recli\fed usi\fg the recli\fe pedal
    Circuit breaker o\f machi\fe   
    (if equipped) ma\b have trippedTur\f the machi\fe OFF a\fd u\fplug from 
    outlet. Check to see if foreig\f object 
    is caught i\f brush roll. Remove object. 
    Plug machi\fe i\f to reset circuit breaker
    The belt is off or broke\f Tur\f power OFF a\fd u\fplug u\fit 
    from outlet. Follow i\fstructio\fs o\f 
    pages 12 a\fd 13
    loss of   
    suction   
    power Ta\fks ma\b \fot be seated properl\b
    Pick up both ta\fks a\fd reseat them 
    so the\b fit s\fugl\b o\f the u\fit 
    Nozzles ma\b \fot be assembled 
    properl\b U\fplug the u\fit. Check to make sure 
    the "lip" of the \fozzle is securel\b 
    hooked i\fto the groove o\f bottom of 
    the machi\fe (see page 9)
    The portable spot clea\fer is \fot 
    attached completel\b Make sure the portable spot clea\fer 
    is attached. Push dow\f firml\b to check
    Dirt\b ta\fk has picked up   
    maximum amou\ft of dirt\b water 
    a\fd has reached full li\fe empt\b dirt\b ta\fk 
    Formula & water ta\fk is empt\b
    Check fluid levels i\f formula & water ta\fk 
    suctio\f gate is ope\f Check to make sure the suctio\f gate 
    is closed. Follow “Clea\fi\fg suctio\f 
    gate” i\fstructio\fs o\f page 12
    Other mai\fte\fa\fce or service \fot i\fcluded i\f the ma\fual should   
    be performed b\b a\f authorized service represe\ftative.
    Tha\fk \bou for selecti\fg a  bissell product.
    please do 
    not return 
    this product 
    t o   t h e   s t o r e .                
    						
    							Accessories
    These items are available for your BI\f\fELL dee\b cleaner. Visit www.BI\f\fELL.com   
       www.
    bissell.com
    pArt # pArt nAme pArt #pArt nAme
    203-6651 3” Tough Stain Tool
    203-6652 Powered TurboBrush™   
    Hand Tool
    203-6653 4” Upholstery Tool203-6654 6” Stair Tool
    203-7885Spraying Crevice Tool203-7412 Deep Reach™ Tool
    210-3040Mesh Bag
    15
    cleaning  formula: Refer to bottom of page 5 of this guide for a full selection of cleaning 
    formula available for purchase.
    Replacement Parts
    These items are available for your BI\f\fELL dee\b cleaner. Visit www.BI\f\fELL.com
    pArt # pArt nAme pArt #pArt nAme
    160-0188 Formula & Water Tank Assembly 
    (includes cap and insert)
    203-2287 Cap and Insert for Formula   
    & Water Tank
    160-0189 Dirty Tank Assembly   
    (includes entire tank)203-7904 Cord Wrap
    203-7896End Caps with Edge Brushes   
    (2 pack, includes screws)203-7897 Spray Tips Assembly   
    (includes two spray tips)
    160-0190 Nozzle Cover Assembly   
    (includes gasket, nozzle cover, 
    and front nozzle cover)160-0191 Front Nozzle 
    203-8256Brush Assembly (includes   
    2 brush rolls, 2 axles, and   
    2 swivel arms)203-8257 Brush Single Pack (includes   
    1 brush roll, and 1 axle)
    203-6688 Small Brush Belt203-6804 Large Brush Belt
    203-6689Hose Secure Latch 203-7918 Dirty Tank Gasket Assembly 
    (include both gaskets)
    203-7917Diverter Cover Assembly 
    (includes cover and screws)*Not all parts are included with every model.
    *Not all parts are included with every model. 
    						
    							16
    ©2013 BISSELL Homecare, Inc
    Grand Rapids, Michigan
    All rights reserved. Printed in China
    Part Number 160-2737  Rev 9/13
    Visit our website at: www.BISSELL.com
    Scotchgard is a trademark of 3M
    Microban® is a registered trademark of Microban Products Company
    Consumer Guarantee 
    This Guarantee only applies outside of the USA and Canada. It is 
    provided by BISSELL International Trading Company BV (“BISSELL”).
    This Guarantee is provided by BISSELL. It gives you specific rights. 
    It is offered as an additional benefit to your rights under law. You 
    also have other rights under law which may vary from country 
    to country. You can find out about your legal rights and remedies 
    by contacting your local consumer advice service. Nothing in this 
    Guarantee will replace or lessen any of your legal rights or remedies.  
    If you need additional instruction regarding this Guarantee or have 
    questions regarding what it may cover, please contact BISSELL 
    Consumer Care or contact your local distributor. 
    This Guarantee is given to the original purchaser of the product from 
    new and is not transferable. You must be able to evidence the date 
    of purchase in order to claim under this Guarantee.
    limited five-year Guarantee
    Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, 
    BISSELL will for five years from the date of purchase by the  
    original purchaser repair or replace (with new or remanufactured 
    components or products), at BISSELL’s option, free of charge, any 
    defective or malfunctioning part or product.
    BISSELL recommends that the original packaging and evidence of   
    the date of purchase be kept for the duration of the Guarantee 
    period in case the need arises within the period to claim on the 
    Guarantee. Keeping the original packaging will assist with any 
    necessary re-packaging and transportation but is not a condition   
    of the Guarantee.
    If for your product is replaced by BISSELL under this Guarantee, 
    the new item will benefit from the remainder of the term of this 
    Guarantee (calculated from the date of the original purchase).  
    The period of this Guarantee shall not be extended whether or  
    not your product is repaired or replaced.
    *EX cEptIoNS AND EX clUSIoNS fRom  
    tHE tERmS of tHE GUARANtEE
    This Guarantee applies to products used for personal domestic use and 
    not commercial or hire purposes.  Consumable components such as 
    filters, belts and mop pads, which must be replaced or serviced by the 
    user from time to time, are not covered by this Guarantee.  
    This Guarantee does not apply to any defect arising from fair wear 
    and tear. Damage or malfunction caused by the user or any third 
    party whether as a result of accident, negligence, abuse, neglect, or 
    any other use not in accordance with the User Guide is not covered 
    by this Guarantee. 
    Visit the  \fISSEll website: www.\fISSEll.com
    When contacting BISSELL, have model number of cleaner available.
    Please record your Model Number: _____________ Please record your Purchase Date: _____________
    NoTe: Please keep your original sales r\ceceipt. It provides proof of the date  
    of purchase in the event of a Guarantee claim. See Guarantee for details.
    An unauthorised repair (or attempted repair) will void this Guarantee 
    whether or not damage has been caused by that repair/attempt.
    Removing or tampering with the Product Rating Label on the   
    product or rendering it illegible will void this Guarantee. 
    SAVE AS SET OUT BELOW BISSELL AND ITS DISTRIBUTORS ARE NOT 
    LIABLE FOR ANY LOSS OR DAMAGE THAT IS NOT FORESEEABLE 
    OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY 
    NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT INCLUDING 
    WITHOUT LIMITATION LOSS OF PROFIT, LOSS OF BUSINESS, BUSINESS 
    INTERRUPTION, LOSS OF OPPORTUNITY, DISTRESS, INCONVENIENCE OR 
    DISAPPOINTMENT.  SAVE AS SET OUT BELOW BISSELL’S LIABILITY WILL 
    NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
    BISSELL  DOES NOT EXCLUDE  OR LIMIT  IN ANY  WAY  ITS LIABILITY  FOR 
    ( A )  DEATH  OR PERSONAL  INjURY CAUSED  BY OUR  NEGLIGENCE  OR THE  
    NEGLIGENCE  OF OUR  EMPLOYEES,  AGENTS OR SUBCONTRACTORS; (B ) 
    FRAUD  OR FRAUDULENT  MISREPRESENTATION; ( C) OR  FOR  ANY  OTHER  
    MATTER  WHICH CANNOT  BE EXCLUDED  OR LIMITED  UNDER LAW.
    Consumer Care
    If your BISSeLL product should require 
    service or to claim under our Limited 
    Five-Year Guarantee, please visit:
    Website or E-mail:www.bissell.com
    for UK inquiries: Telepho\fe: 0844.888.\a6644
    Mo\fda\b – Thursda\b 9am - 5pm
    Frida\b 9am - 4pm
    bissell Homecare (Overseas) i\fc.
    Grou\fd Floor
    226 berwick Ave\fue
    slough, 
    berkshire, sl1 4QT
    U\fited Ki\fgdom
    Febreze is a trademark 
    of The Proctor & Gamble 
    Company, Cincinnati, Ohio 
    used under license by 
    BISSELL Homecare, Inc. 
    						
    All Bissell manuals Comments (0)

    Related Manuals for Bisell PowerWash LiftOff 1190 User Manual