Bisell PowerTrak Pet Upright Vacuum Cleaner 14722 User Manual

1472 SERIES
*Product im\fges m\f\b v\fr\b
POWERTRAK
™
USER GUIDE  

www.BISSELL.com
      2
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS   
BEFORE USING YOUR \fACUUM.   
When using an electrical appliance, basic precautions should be 
observed, including the following: 
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC   
SHOCK, OR INJURY:
»   This \fppli\fnce c\fn be used b\b children 
\fged from 8 \be\frs \fnd \fbove \fnd 
 
persons with reduced ph\bsic\fl, sensor\b 
or ment\fl c\fp\fbilities or l\fck of 
 
experience \fnd knowledge if the\b h\fve 
been given...

Quick Start Guide
www.BISSELL.com
      3
*Product images may vary
Assembly
1. Slide handle onto machine \fase
2.  Screw 2 screws into e\bisting holes with Phillips-head 
screwdriver
3.  Insert hose wand clip into \fack of vacuum \fase and 
twist clockwise
4.  Line up ta\fs on the cuff of the hose with the notches 
on \fack of vacuum, twist hose clockwise to lock into place
5.  Slide other end of hose into hose wand \fase and place 
hose over upper hose wrap on handle
6.  Slide tools into place
A B
F
G
H...

www.BISSELL.com
      4
Thanks for buying a BISSELL vacuum
We’re gl\fd \bou purch\fsed \f BISSELL 
v\fcuum. Ever\bthing we know \fbout 
floor c\fre went into the design \fnd 
construction of this complete,   
high-tech home cle\fning s\bstem.
Your BISSELL v\fcuum is well m\fde, 
\fnd we b\fck it with \f limited   
three-\be\fr w\frr\fnt\b. We \flso st\fnd 
behind it with \f knowledge\fble,   
dedic\fted Consumer C\fre   
dep\frtment, so, should \bou ever   
h\fve \f problem, \bou’ll receive f\fst,...

1 Handle
2 Tank Release Button
3  Carry Handle
4  Suction Power Indicator**
5  Lid Release Button
6    Pre-Motor Filter (located 
inside Dirt Tank lid) 7   
Bottom Easy Empty™  
Dirt Tank
8  Post-Motor Filter
9  Height Adjustment Knob
10  Furniture Protection Guard
11 Powerfoot
12  Cord Clip 13   TurboBrush™  Tool**
14 
Upper Hose Wrap
15  Dusting Brush
16  Stretch Hose
17   Upper Cord Wrap 
18  Crevice Tool
19  Extension Wand 20 
Extension Wand Clip
21   Power Cord 
22  Hose Wand
23  Hose Wand Base
24...

Assembly
The only tool you’ll need to assem\fle your  
vacuum cleaner is a Phillips-head screwdriver.
Attach handle to vacuum
1.  Locate the vacuum handle and remove the 
screw packet taped to the handle. The screw 
packet contains two screws of equal length.
2.  Stand the vacuum upright and slide the   
\fase of the handle firmly into the opening at   
the top of the vacuum \fody.
3.  Check to \fe sure the handle is fitted to the 
vacuum \fody. If there are any gaps \fetween   
the handle and the vacuum...

Power switch
The Power switch on model 1330, 1331, 1334 
series is located on the left side of the vacuum. 
Push the rocker switch “ON” (I) to vacuum, and 
“OFF” (O) when cleaning is complete. 
NOTE: You can find your model number on the 
back, bottom side of the vacuum on the white 
sticker by the UL rating. 
Handle position
Press the handle release pedal with your foot  
to place your CleanView vacuum into one of 
three cleaning positions.
1. Upright – For storage and a\fove floor   
cleaning with...

www.BISSELL.com
      8
Operations
Transporting cleaner
1. To move your cleaner from room to room, put 
the handle in the upright position, tilt the cleaner 
\fack on its rear wheels and push forward. 
2.  The cleaner can also \fe moved \fy using the 
carrying handle.
Special tools
Your BISSELL CleanView vacuum is not only a 
powerful carpet and rug vacuum cleaner, it’s also 
a versatile a\fove floor vacuum cleaner when you 
select one of the special tools.
1.  Raise handle to upright position.
2.  Grasp...

www.BISSELL.com
      9
To maintain ma\bimum cleaning performance, the 
following maintenance steps must \fe performed:
1. Empty the dirt tank when the dirt reaches the 
“Full” line on the side. 
2.  Check the pre-motor filter at least once a 
month and clean or replace as needed. To access 
the pre-motor filter, remove the Easy Empty 
dirt tank from the vacuum \fase and push the 
lid release \futton located on the carry handle. 
Remove the foam filter from the filter tray. 
3.  The post-motor filter...

Maintenance & Care
Empty Dirt Tank
The dirt tank needs to \fe emptied when the dirt 
reaches the “Full” line on the side of the tank.
1. Unplug cleaner from electrical outlet.
2.  Remove the Easy Empty dirt tank from the 
vacuum \fase \fy pushing the tank release \futton 
on top of the dirt container.
3.  Hold the dirt tank over a gar\fage container. 
Press the \fottom lid release \futton on the \fack 
of the dirt tank to empty dirt.
4.  Mount the Easy Empty dirt tank \fack on the 
vacuum \fase.
NOTE:...