Bisell PowerGroom Rewind Family 6355E User Manual

2Thank You
USER'S GUIDE
1428, 5957 & 6355 SERIES
Safety Instructions
Product View
Assembly
Operations
Maintenance and care
Troubleshooting
Consumer CareReplacement Parts3
4
5
6-8
8-11 12
16 13
Accessories
Warranty14
15
™    

www.bissell.com 
Thanks for buying a BISSELL vacuum
We’re glad you purchased a BISSELL vacuum. Everything we know about 
floor care went into the design and construction of this complete, high-tech 
home cleaning system.
Your BISSELL vacuum is well made, and we back it with a limited one 
year warranty. We also stand behind it with a knowledgeable, dedicated 
Consumer Care department, so, should you ever have a problem,  
you’ll receive fast, considerate assistance.
My great-grandfather invented the...

www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
Read all instRuctions 
befoRe using youR   
upRight V acuuM.  
  WaRning: To  
reduce the risk of fire, electric shock, or injury:
■
  Do not leave vacuum cleaner unattended 
when it is plugged in.
■  Unplug from outlet when not in use and  
before servicing.
■  Do not use outdoors or on wet surfaces.
■ Do not allow children to operate vacuum   
cleaner...

www.bissell.com 4
Product view
Carrying
Handle
Crevice 
Tool Handle
Automatic 
Cord Rewind
Power Switch
Handle 
Release   
Pedal
Powerfoot
*The filter media, not the vacuum as a whole, complies with IEST-RP-CC001.5 HEPA standard. Stretch Hose 
TurboBrush
™ 
Tool (Select 
Models Only)
Extension 
 
Wand
Furniture Protection 
Guard Height 
Adjustment 
Knob
Easy Empty
™ 
Dirt Container
Lock ’n 
Seal
™ Lever
Combination 
Dusting Brush/ 
Upholstery Tool
Hose  
Wand
Hose Clip
HEPA Media 
Filter* Hose 
 
Wand...

www.bissell.com 
Assembly
5
you need: phillips head screwdriver.
attach handle to vacuum
1.  Locate the vacuum handle and remove  
the screw packet taped to the base of  
the handle.
2.  Stand the vacuum upright and slide the 
base of the handle firmly into the grooves 
at the top of the vacuum body.
3.  Insert the screws provided from the screw 
packet into the existing holes. Tighten 
securely with a screwdriver.
attach vacuum hose and tools
1. Line up tabs on the base of the Twist  
‘n Snap™ hose with...

www.bissell.com 
Operations
6
automatic cord Rewind
Gently pull out power cord and stop when 
yellow line is visible. Do not pull power  
cord beyond the red line. Plug cord into  
electrical outlet. 
To retract, press the button on top of the cord 
rewind. Hold onto the plug while rewinding 
to prevent the cord from whipping.
power switch 
Push the rocker switch “ON” (I) to vacuum, 
and “OFF” (O) when cleaning is complete. 
handle position
Press the handle release pedal with foot to place 
vacuum into...

www.bissell.com 7
Operations
tools
Attach desired tool to hose for above floor   
cleaning surfaces or hard to reach areas. 
1.  Remove Hose: with vacuum in upright 
position, grasp the Hose Wand to  
separate hose from hose base. 
2.  Attach tools by firmly pushing onto  
vacuum hose or extension wand.
a .  combination dusting brush/
upholstery tool:   
Rotate for desired use. Use brush side to 
dust, blinds, books, lamps, shelves, and 
baseboards. Use upholstery side to for 
furniture, drapes, and...

www.bissell.com 
Operations
8
Maintenance and care
empty dirt container
Empty when dirt reaches the “Full” line  
on the container. 
1. Turn power OFF. Unplug power  
cord from electrical outlet.
2.  Slide Lock ‘n Seal lever to  
“Unlock” position.  
3.  Grasp dirt cup handle portion and  
pull straight out to remove from  
vacuum and empty.
4.  Place dirt container back in the vacuum 
and slide lever to lock position. 
note: the dirt container may  
be washed in warm water with  
mild detergent. Make...

www.bissell.com 9
Maintenance and care
 
4. Separate the outer foam filter and inner 
pleated circular filter. Wash each   
individually by hand in warm water.   
Mild detergent may be used if desired. 
Rinse well; let filters completely air dry 
before replacing in filter cup. 
5.  Wash filter cup in warm water with mild 
detergent. Completely air dry before 
reassembling with filters.  
do not put in dishW asheR. 
6.  The upper tank and louvers can be 
wiped clean with a damp cloth. Reach 
underneath...

www.bissell.com 
Maintenance and care
10
checking rotating floor brush  
and drive belt
check your vacuum’s rotating floor 
brush and drive belt regularly for 
wear or damage. 
1.  Turn power OFF. Unplug vacuum cord 
from electrical outlet. 
2.  Place handle in low position and turn   
vacuum over so bottom side is facing up.
3.  Using a screwdriver, remove the screws 
and lift brush cover off. 
4.  Grasp rotating floor brush at both   
ends and lift. 
5.  Clean strings, hair and other debris   
from...