Bisell PowerForce Cylinder Vacuum Cleaner 1542A User Manual

							POWERFORCE
™
 
1542
GENERAL PURPOSE VACUUM CLEANER  
						

							www.BISSELL.com
      2
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS   
FOR FUTURE USE
FOR OPERATION ON A 220-240 VOLT A.C. 50/60 HZ POWER SUPPLY ONLY. 
This model is for household use only.
READ ALL INSTRUCTIONS   
BEFORE USING YOUR VACUUM.   
When using an electrical appliance, basic precautions should be 
observed, including the following: 
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC   
SHOCK, OR INJURY:
»  This appliance can be used by children 
aged from 8 years and above and 
 
persons with reduced physical, sensory 
or mental capabilities or lack of 
 
experience and knowledge if they have 
been given supervision or instruction 
concerning use of the appliance in a 
safe way and understand the hazards 
involved. Cleaning and user 
 
maintenance shall not be made by  
children without supervision.  
»     Children should be supervised to ensure 
that they do not play with the appliance.
»    If the supply cable is damaged, it must 
be replaced by the manufacturer, its 
 
service agent or similarly qualified  
persons in order to avoid a hazard.
»  Keep hair, loose clothing, fingers, and  
all parts of body away from openings 
and moving parts of the appliance and 
its accessories.
»   Use indoors only.
»   For dry pick up only.
»   Do not leave machine when it is plugged in. »  
Do not service machine when it is plugged in.
»   Do not use with damaged cable or plug.
»   If appliance is not working as it should, has been 
dropped, damaged, left outdoors, or dropped into 
water, have it repaired at an authorized service center.
»   Do not handle unit with wet hands.
»   Do not pull or carry by cable, use cable as a handle, 
 close door on cable, pull cable around sharp corners  or edges, run appliance over cable, or expose cable  to heated surfaces.
»   Do not unplug by pulling on cable. Unplug by 
 grasping plug.
»   Do not run appliance over cable.
»   Do not handle plug or appliance with wet hands.
»   Do not expose hair, loose clothing, fingers or body 
 parts to openings or moving parts.
»   Do not pick up hot or burning objects such as 
 cigarettes, matches, or hot ashes.
»   Do not pick up flammable or combustible materials 
(lighter fluid, petrol, kerosene, etc.) or use in the 
 presence of explosive liquids or vapours.
»   Do not use appliance in an enclosed space filled with 
vapours given off by oil base paint, paint thinner, some 
moth proofing substances, flammable dust, or other 
explosive or toxic vapours.
»   Remove plug from electrical socket before cleaning 
 or maintaining the appliance.
»   Do not pick up toxic material (chlorine bleach, 
 ammonia, drain cleaner, petrol, etc.).
»   Do not use for any purpose other than described in 
 this User’s Guide.
»   Use only manufacturer’s recommended attachments.
»   Keep appliance on a level surface
»   Turn off all controls before unplugging.
»   Be extra careful when cleaning stairs.
»   This appliance is provided with double insulation. 
 Use only identical replacement parts.
»   Pay close attention when working around children.  
						

							www.BISSELL.com
      3
Thanks for buying a BISSELL vacuum 
We’re glad you purchased a BISSELL vacuum. Everything we   
know about floor care went into the design and construction of 
this complete, high-tech home cleaning system.
Your BISSELL vacuum is well made, and we back it with a limited 
two-year guarantee. We also stand behind it with a knowledgeable, 
dedicated Consumer Care department, so, should you ever have a 
problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, 
BISSELL is a global leader in the design, manufacture, and service 
of high-quality homecare products like your BISSELL vacuum.
Thanks again, from all of us at BISSELL.
Mark J. Bissell  
Chairman & CEO
Symbol Definitions
WARNINGAN ACTION OR ATTENTION IS NEEDED TO 
THIS AREA IN ORDER TO REDUCE THE RISK 
OF ELECTRIC SHOCK, FIRE, OR INJURY
TIPNOTE OR HINT WHICH IS NOT ESSENTIAL 
BUT MAY IMPROVE USABILITY
GUIDEREAD USER GUIDE FOR COMPLETE   
SAFETY AND USER INSTRUCTIONS
WEEEDO NOT THROW THE APPLIANCE AWAY 
WITH THE NORMAL HOUSHOLD WASTE 
AT THE END OF ITS LIFE, BUT HAND IT IN 
AT AN OFFICIAL COLLECTION POINT FOR 
RECYCLING. BY DOING THIS YOU WILL 
HELP TO PRESERVE THE ENVIRONMENT.
»   Before cleaning under low furniture, check 
area first for objects that might harm the unit 
or block the hose.
»   Hair, string and small objects can block the 
hose and tools.  Check them occasionally   
for obstructions. »  
Use the air flow regulator to reduce air flow 
as needed when using the tools.
»   For maximum cleaning performance,   
check the filters often and clean or replace 
if necessary. 
						

							1
2
3
4
56
10
8
9
7
11
12
4www.BISSELL.com
      
A
D1
C2
D2D3
1.
3.
2.
3. 4.
2.3.
2.
1516
1314
B
C1
1.
4.
3. 2. 
						

							www.BISSELL.com
      5
A Product View
C1 - Automatic cord rewind
Your vacuum is equipped with an automatic 
cord rewind. When cleaning is finished, press 
the power button OFF and grasp the plug to   
disconnect from the electrical outlet. Hold 
the plug and press the automatic cord rewind 
button to rewind the cord automatically.
C2 - Power button
Turn the power ON or OFF by pressing lightly 
downward on the power button (  ).
Special tools
Your BISSELL CleanView Power vacuum is   
not only a powerful carpet and rug vacuum 
cleaner, it’s also a versatile bare floor and 
above floor vacuum cleaner when you select 
one of the special tools.
Floor nozzle (12)Use to vacuum carpets, rugs and bare floors. 
Swivel head turns to get into tight spaces 
and fits under cabinets. This floor nozzle 
was used for carpet and hard floor testing 
in compliance with EU regulations 666/2013 
Ecodesign Requirements for Vacuum 
Cleaners, and 665/2013 Energy Labeling of 
Vacuum Cleaners.
1.  To vacuum carpets and rugs, push the brush 
switch to the carpet position 
 . This will 
pull the brushes up into the floor nozzle.
2.  To vacuum bare floors, push the brush 
switch to the bare floor position
.   
This will extend the brus hes down from   
the floor nozzle.
Small accessories (13)Use the crevice tool in tight, narrow spaces.
Use the dusting brush to clean curtains,   
draperies, and side tables and window ledg-
es. Use upholstery tool for soft furnishings.
TurboBrush™ Tool (14)  
(select models only)
Use rotating brish action for small, flat areas 
such as cushions and beds.
NOTE: Press down gently and pull toward 
you in a raking motion. Too much pressure 
will cause the brush to stop rotating.
Hard Floor Brush (15)  
(select models only)
Specially designed to vacuum bare floors. 
B Assembly
1. Connect hose to vacuum by inserting hose 
connector on the end of the hose into the 
suction inlet. Make sure the hose is positioned 
so the tabs on the hose connector line up 
with the notches on the suction inlet.
2.  Connect hose handle to the end of the 
extention wand and twist slightly to tighten.
3.  Connect floor nozzle to the end of the 
extension wand and twist slightly to tighten.
4.  Once assembled, you can store your   
vacuum by inserting the storage clip 
(located on the back of the floor nozzle) into 
the storage slot on the rear of the vacuum.
Colours may vary from models shown.
C Operations
Power cord
The power cord is located at the rear of the 
vacuum. Gently pull out the power cord, 
watching for the yellow line. Stop pulling the 
power cord once the yellow line is visible. 
There is also a red line, which indicates the 
end of the usable cord. Do not pull the   
power cord out beyond the red line. 
Do not plug in your cleaner until you have 
completely assembled it per the following 
instructions and are familiar with all instructions 
and operating procedures.
Be careful to avoid injury as cord retracts very quickly.
Plastic film can be dangerous. To avoid danger of 
suffocation, keep away from babies and children.
Before using your vacuum, make sure that the dirt 
cup and all filters are in place. Do not operate your 
vacuum without the dirt cup and filters.
1 Handle
2  Air Flow Regulator
3  Extension Wand
4 Hose
5  Carry Handle
6  Dirt Cup Release Button
7  Emptying Button
8 Cyclone
9  Easy Empty™ Dirt Cup 10 
Hose Connector
11  Brush Switch
12  Multi-Surface Floor Nozzle
13     Crevice Tool, Dusting Brush & 
Upholstery Tool w/Holster
14  TurboBrush™ Tool
15  Hard Floor Brush
16  Turbine Nozzle 
						

							6
Turbine Head (16) (select models only)
Use to vacuum carpets and rugs. Swivel 
head turns to get into tight spaces and fits 
under tight cabinets. Easy-to-remove nozzle 
window for cleaning threads and debris from 
the brush roll. Squeeze the 2 small tabs at 
the side of the foot to release the window. 
To replace, align the window tabs at the top 
with the 2 openings of the foot and push 
into place until you hear a snap and the   
window is securely in place. 
Air flow regulator (2)
Open the air flow regulator by sliding the 
regulator up towards the handle to an open 
position. This will reduce the suction power 
for vacuuming delicate fabrics.
For full suction power, close the air flow 
regulator by sliding the regulator down to 
the closed position. 
D Care & Storage
D1 - Empty the dirt cup
Empty the dirt cup as soon as the dirt 
reaches the “FULL” lines on the sides of the 
dirt cup.
1.  Unplug the vacuum from the electrical 
outlet.
2.  Press the dirt cup release button on  
the carry handle and lift up to remove the 
dirt cup.
3.  Choose an emptying method. Method   
#2 is recommended for allergy suffers.
   Method  #1 – Hold the dirt cup over a 
rubbish bin and push the emptying   
button to open the bottom. Close the 
bottom after the dirt empties.
   Method #2 – Place a plastic bag over 
the bottom of the dirt cup. Push the 
emptying button through the plastic   
to open the   
bottom. After the dust settles, close the   
bottom and remove the bag to discard.
4.  Replace the dirt cup by placing it back 
into the vacuum and pushing down on the 
carry handle until it snaps back into place. 
D2 - Cleaning the dirt cup filter 
Use only BISSELL replacement filters in your 
CleanView Power.
1.  Unplug the vacuum from the electrical 
outlet.
2.  The dirt cup filters can be reached by 
removing the dirt cup from the vacuum, 
and unclipping the dirt cup lid then pivoting 
backwards. Pull filter upwards to remove.
3.  Remove the cyclone screen by gripping 
the two tabs revealed by the filter removal, 
twisting anti-clockwise until you hear a click 
and then pulling straight up.
4.  The cyclone filter screen, dirt cup filter 
and filter foam can be can be hand washed 
in cold water with a mild detergent. Rinse 
well and air dry thoroughly before placing 
back onto the filter frame base.
5. Attach cyclone filter screen into dirt cup by 
placing back into position, lining up the word 
‘close’ with the tab below the dirt cup lid 
hinge. Twist clockwise to lock.
6.  Place the premotor filter on top with foam 
side facing down.
7.   Close dirt cup lid and replace dirt container 
back onto product.
D3 - Replacing the   
post-motor filter
The post-motor filter assists in the filtration   
process to return cleaner air to the room. 
Use only BISSELL replacement filters.
1.  Unplug the vacuum from electrical outlet.
2.  Remove the filter door (located on the back 
of the vacuum) by pushing down on the tab 
and pulling out and away from the vacuum.
3.  The post-motor filter can be hand washed 
in cold water with a mild detergent. Rinse 
well and air dry thoroughly before placing 
back into the vacuum.
4.  Replace the filter door by placing the tabs 
on the bottom of the filter door into the 
notches on the bottom of the post-motor 
filter compartment and pushing the tab 
forward back into the vacuum to lock into 
place.
www. BISSELL.com
   
   
To reduce the risk of electric shock, turn power switch 
off and disconnect plug from electrical socket 
before performing maintenance or care.
Do not operate cleaner with damp or wet filters 
or without all filters in place. 
						

							7
Clearing clogs from the dirt cup
1. Unplug the vacuum from electrical outlet.
2.  Remove the dirt cup from the vacuum,   
following steps 1-3 of Emptying the dirt cup 
on page 6.
3.  Remove the dirt cup filter assembly from 
the dirt cup, following step 2 of Clean the 
dirt cup filter on page 6.
4.  Tap the dirt cup filter assembly over a   
garbage container to remove any dirt or 
debris from the cyclone screen that sur-
rounds the dirt cup filter. 5. 
Reach up into the dirt cup to clear any dirt 
or debris from the dirt cup.
6.  Check to see if there are any clogs   
in the suction inlet.
7.   After clearing any dirt or debris from   
the dirt cup, replace the dirt cup filter 
assembly back in the dirt cup following step 
8 of Cleaning the dirt cup filter on page 6.
This product is intended for household use only and not for 
commercial or industrial use. Vacuuming of dust from products 
like plaster, concrete or ashes will damage the motor and void 
the guarantee.
Replacement Parts
Replacement parts and accessories are available for purchase. To purchase visit 
www.BISSELL.com.  
						

							Consumer Guarantee This Guarantee only applies outside of the USA and Canada. It is 
provided by BISSELL International Trading Company BV (“BISSELL”).
This Guarantee is provided by BISSELL. It gives you specific rights. 
It is offered as an additional benefit to your rights under law. You 
also have other rights under law which may vary from country 
to country. You can find out about your legal rights and remedies 
by contacting your local consumer advice service. Nothing in this 
Guarantee will replace or lessen any of your legal rights or remedies.  
If you need additional instruction regarding this Guarantee or have 
questions regarding what it may cover, please contact BISSELL 
Consumer Care or contact your local distributor. 
This Guarantee is given to the original purchaser of the product from 
new and is not transferable. You must be able to evidence the date 
of purchase in order to claim under this Guarantee.
Limited Two-Year Guarantee
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, 
BISSELL will for two years from the date of purchase by the 
original purchaser repair or replace (with new or remanufactured 
components or products), at BISSELL’s option, free of charge, any 
defective or malfunctioning part or product.
BISSELL recommends that the original packaging and evidence of  
the date of purchase be kept for the duration of the Guarantee 
period in case the need arises within the period to claim on the 
Guarantee. Keeping the original packaging will assist with any 
necessary re-packaging and transportation but is not a condition   
of the Guarantee.
If your product is replaced by BISSELL under this Guarantee, the   
new item will benefit from the remainder of the term of this   
Guarantee (calculated from the date of the original purchase).  
The period of this Guarantee shall not be extended whether  
or not your product is repaired or replaced.
*EXCEPTIONS AND EXCLUSIONS FROM 
THE TERMS OF THE GUARANTEE
This Guarantee applies to products used for personal domestic use and 
not commercial or hire purposes.  Consumable components such as 
filters, belts and mop pads, which must be replaced or serviced by the 
user from time to time, are not covered by this Guarantee.  
This Guarantee does not apply to any defect arising from fair wear 
and tear. Damage or malfunction caused by the user or any third 
party whether as a result of accident, negligence, abuse, neglect, or 
any other use not in accordance with the User Guide is not covered 
by this Guarantee.  An unauthorised repair (or attempted repair) will void this Guarantee 
whether or not damage has been caused by that repair/attempt.
Removing or tampering with the Product Rating Label on the 
 
product or rendering it illegible will void this Guarantee. 
SAVE AS SET OUT BELOW BISSELL AND ITS DISTRIBUTORS ARE NOT 
LIABLE FOR ANY LOSS OR DAMAGE THAT IS NOT FORESEEABLE 
OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY 
NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT INCLUDING 
WITHOUT LIMITATION LOSS OF PROFIT, LOSS OF BUSINESS, BUSINESS 
INTERRUPTION, LOSS OF OPPORTUNITY, DISTRESS, INCONVENIENCE OR 
DISAPPOINTMENT.  SAVE AS SET OUT BELOW BISSELL’S LIABILITY WILL 
NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
BISSELL DOES NOT EXCLUDE OR LIMIT IN ANY WAY ITS LIABILITY FOR 
(A) DEATH OR PERSONAL INJURY CAUSED BY OUR NEGLIGENCE OR THE 
NEGLIGENCE OF OUR EMPLOYEES, AGENTS OR SUBCONTRACTORS; (B) 
FRAUD OR FRAUDULENT MISREPRESENTATION; (C) OR FOR ANY OTHER 
MATTER WHICH CANNOT BE EXCLUDED OR LIMITED UNDER LAW.
Consumer Care
If your BISSELL product should require 
service or to claim under our Limited 
Two-Year Guarantee, please contact us:
Website:
www.BISSELL.com
Email: 
[email protected]
Telephone: 0344-888-6644
Write: BISSELL Homecare (Overseas) Inc.
Ground Floor
226 Berwick Avenue
Slough, Berkshire, SL1 4QT
United Kingdom
©2016 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 160-5421  05/16 RevC
Visit our website at: www.BISSELL.com
Visit the BISSELL website:  
www.BISSELL.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: _____________   
Please record your Purchase Date: _____________
NOTE: Please keep your original sales receipt. It  
provides proof of the date of purchase in the event  
of a Guarantee claim. See Guarantee for details.
ABCDEFG
ENER GYIJ AIEIAенер гиR ● ε ν ερ γει α
24.4kW h/annum
ABCDEFG
81d B
ABCDEF G
665/2013 - I
AAB
C
D
E
F
G
ENERGIA - ЕНЕРГИ Я - ΕΝΕΡΓΕΙΑ
ENER GIJA - ENER GY - ENER GIE - ENER GI
1542
P o w erForce
Based on 3rd party testing of the lowest performing unit from internal testing of a 3 unit 
sample in accordance with EU regulations 666/2013 and 665/2013