Home > Bissell > Cleaner > Bisell Powerforce 300 Rewind 3243e User Manual

Bisell Powerforce 300 Rewind 3243e User Manual

Here you can view all the pages of manual Bisell Powerforce 300 Rewind 3243e User Manual. The Bissell manuals for Cleaner are available online for free. You can easily download all the documents as PDF.

Page 11

Maintenance & Care
Replacing the post-motor filter
Use only a genuine BISSELL replacement  
post-motor filter in your BISSELL vacuum.
1. Unplug the cleaner from electrical outlet.
2. The post-motor filter assists in the filtration 
process to return clean air to the room. Replace 
the post-motor filter every three to si\b months. 
To access the post-motor filter, remove the 
filter tray located \felow the Easy Empty dirt 
tank. When the filter \fecomes dirty, push the 
filter through the \fottom of the...

Page 12

www.BISSELL.com
      
Replace drive belt
Use only a genuine BISSELL style 9 replacement 
\felt (#203-1093) in your BISSELL vacuum.
1. Unplug cleaner from electrical outlet.
2. With rotating floor \frush removed from   
vacuum cleaner (steps 1-4 of Check rotating 
floor \frush and drive \felt), grasp old drive   
\felt and remove from motor pulley. Discard   
old drive \felt.
3. Place new drive \felt over motor pulley and 
stretch other end over rotating floor \frush in   
the space \fetween the...

Page 13

     www.
BISSELL.com
 
Clearing a clog
Low suction or poor pickup may \fe due to 
a clog in the vacuum cleaner. If you notice a 
change in the sound of the motor or a reduction 
in the spinning action of the dirt or \frush roll, 
check for clogs.
1. Unplug cleaner from electrical outlet.
2. Remove Easy Empty dirt tank from vacuum 
\fase and empty dirt and de\fris.
3. Remove inner cyclone from Easy Empty dirt 
tank (see page 10) and check for de\fris \fuild-up 
or clogs in the upper tank.  
4. Check the...

Page 14

www.BISSELL.com
      14
TroubleshootingWARNING
To reduce the risk of electric shock, turn power switch off 
and disconnect polarized plug from electrical outlet before 
performing maintenance or troubleshooting checks.
Problem Possible causes Remedies
\facuum  
cleaner won’t   
turn on Power cord not plugged in
Check electrical plug
Blown fuse/tripped \freaker Check/replace fuse or reset \freaker
\facuum   
cleaner won’t   
pick up dirt Incorrect height adjustment
Adjust powerfoot to correct height...

Page 15

Replacement Parts
Accessories
These items are available for your BI\f\fELL vacuum\b  
Call 0344\b888\b6644 or visit www\bbissell\bcom
These items are available for your BI\f\fELL vacuum\b   
Call 0344\b888\b6644 or visit www\bbissell\bcom
  
   www.
BISSELL.com
 
PART #PART NAME PART #PART NAME
160-1216 Brush Roll (13.5”) 
203-1093 Style 9 Drive Belt   
(2-Pack)
203-2662  Pre-Motor  Filter203-2665 Hose Assembly
203-2663 Post-Motor  Filter
PART #PART NAME PART #PART NAME
203-1748 TurboBrush Tool
203-1527...

Page 16

16
Consumer Guarantee
This Guarantee only applies outside of the USA and Canada. It is 
provided by BISSELL International Trading Company BV (“BISSELL”).
This Guarantee is provided by BISSELL. It gives you specific rights. 
It is offered as an additional benefit to your rights under law. You 
also have other rights under law which may vary from country 
to country. You can find out about your legal rights and remedies 
by contacting your local consumer advice service. Nothing in this 
Guarantee will...
Start reading Bisell Powerforce 300 Rewind 3243e User Manual

Related Manuals for Bisell Powerforce 300 Rewind 3243e User Manual

All Bissell manuals