Bisell HydroClean Complete 81N7E User Manual

							HYDROCLEAN COMPLETE
™ 
81N7  
						

							2www.bissell.com
      
11
12
13
18
19
1617
15
14
20
21
23
22
27
29282526
24
3233
31
303534
3940
41
38
3736
4243
123
4
8
79
10
56
A-1
A-2
A-3
56575859A-460
44
5051
4546
52
47
53
48
54
49
55 
						

							B
C-1
C-2
3
4 25 
3
2 
1
3 
1 
www.bissell.com
      
4 
5 
4 
9  7 
8 
6  
						

							www.bissell.com
      4
EN
5  7b 
7a 
6
1. 2.
C-3
C-5
C-4
D-2
D-1
5
5
1 
1 
7 
10
4 
5 
3 
Adsdfdd  ghg bvh
cv bbj  jkn hnbj  jkvh
gcg hhjj  jhf fhl k llgh
1a 
2 4
1  3 
						

							www.bissell.com
      5
Thanks for buying a BISSELL water filtration cleaner 
\fe’re \blad you purchased a BISSELL water filtration cleaner. 
Everythin\b we know about floor care went into the desi\bn and 
construction of this complete, hi\bh-tech home cleanin\b system.
Your BISSELL water filtration cleaner is well made, and we back it 
with a limited two year \buarantee. \fe also stand behind it with a 
knowled\beable, dedicated Consumer Care department, so, should 
you ever have a problem, you’ll receive fast, considerate assistance.
My \breat-\brandfather invented the floor sweeper in 1876. Today, 
BISSELL is a \blobal leader in the desi\bn, manufacture, and   
service of hi\bh quality homecare products like your BISSELL   
water filtration cleaner.
Thanks a\bain, from all of us at BISSELL.
Mark J. Bissell  
Chairman & CEO
Symbol Definitions
WARNIN\frisk of fire, electric shock,   
or injury
TIPnote or hint which is not essential 
but may improve usability
\fuI\beread user guide for complete   
safety and user instructions
Weeedo not throw the appliance away  
with the normal houshold waste  
at the end of its life, but hand it in  
at an official collection point for  
recycling. by doing this you will  
help to preserve the environment . 
						

							www.bissell.com
      6
ImPoRTANT S AfeTy INSTRucTIoNS
»   Do not leave appliance when plu\b\bed in.
»    Unplu\b from electrical socket when not in use and 
before servicin\b.
»    Do not modify earthed plu\b.
»    To reduce the risk of electric shock- Use indoors only. 
Do not expose to rain. Store indoors.
»    Do not allow to be used as a toy.
»    Not intended for use by persons (includin\b children) with 
reduced physical, sensory or mental capabilities, or lack 
of experience and knowled\be, unless they have been 
\biven supervision or instruction concernin\b use of the 
appliance by a person responsible for their safety.
»    Children should be supervised to ensure that they do 
not play with the appliance.
»    Use only as described in the user \buide.
»    Use only manufacturer’s recommended attachments.
»    Do not use with dama\bed cable or plu\b.
»    If supply cable is dama\bed, it must be replaced by   
the manufacturer or its service a\bent in order to   
avoid a hazard. »
   Do not immerse in water or liquid.
»    If appliance is not workin\b as it should, has been 
dropped, dama\bed, left outdoors, or dropped into 
water; do not attempt to operate it and return it to   
a service center.
»    Liquid or steam must not be directed towards   
equipment containin\b electrical components.
»    Do not pull or carry by cable, use cable as a handle, 
close door on cable, or pull cable around sharp ed\bes   
or corners.
»    Do not run appliance over cable.
»    Keep cable away from heated surfaces.
»    Do not unplu\b by pullin\b on cable.
»    To unplu\b, \brasp the plu\b, not the cable.
»    Do not handle plu\b or appliance with wet hands.
»    Do not put any object into openin\bs.
»    Do not use with any openin\b blocked; keep free of 
dust, lint, hair, and anythin\b that may reduce air flow.
»    Keep hair, loose clothin\b, fin\bers, and all parts of   
body away from openin\bs and movin\b parts.
»    Turn off all controls before unplu\b\bin\b.
»    Use extra care when cleanin\b on stairs.
»    Do not use to pick up flammable or combustible   
liquids, such as petrol, or use in areas where they   
may be present.
»    Do not pick up toxic material (chlorine bleach,   
ammonia, drain cleaner, etc.)
»    Do not use appliance in an enclosed space   
filled with vapors \biven off by oil base paint, some 
mothproofin\b substances, flammable dust, or other 
explosive or toxic vapors.
»    Do not pick up hard or sharp objects such as \blass, 
nails, screws, coins, etc.
»    Keep appliance on a level surface.
»    Use only BISSELL cleanin\b formulas intended for   
use with this machine.
ReA\b  All INSTRucTIoNS   
befoRe uSIN\f youR cleANeR.   
When using an electrical appliance, basic precautions should be 
observed, including the following.  
WARNIN\f
always connect to a properly earthed 
electrical socket .
WARNIN\f
to reduce the risk of fire, electric   
shock, or injury:
SAVe THeSe INSTRucTIoNS   
foR  fuTuRe  uSe
foR oPeRATIoN  oN A 220-240 V olT A. c. 50/60 Hz Po WeR SuPPly oNly. 
This model is for household use only.
WARNIN\f
to reduce the risk of electric shock -   
use indoors only .  
						

							www.bissell.com
      7
A Product View
A-1 Water filter 
Vacuum  mode
 1 Collection Tank Handle
2  Top Lid
3  Pre-Motor Filter
4   Collection Tank
5  Quick Release™ Hose Door
6  Mode Selector
7  Solution Hose
8  Solution Hose Hook-up
9  Wand Holder
10  Multi-Surface Vacuum Tool
11 Grip
12 Wand
13  Carry Handle
14  Tool Caddy & Tools
15  Power Button
16  HEPA Media Filter* Door
17  Long Power Cable
18  Air Flow Regulator
19  TurboBrush™ Vacuum Tool
A-2 Wet   
clean  mode
20 Spray Trigger
21 Grip
22  Carry Handle
23  Solution Tank
24  Wand Holder
25  Quick Release™ Cable Wrap
26  Heater Button
27  Measuring Cap
28  Power Button
29  Wet Clean Button
30  HEPA Media Filter* Door
31 
  Deep Clean Carpet Washing Tool32  3 Row Brush
33  EdgeSweep™ Brushes
34  Quick Dry Hard Floor Tool
35  Microfiber Mop Pad
36  Mode Selector
37  Quick Release™ Hose Door
38  Pre-Motor Filter
39  Top Lid
40  Collection Tank Handle
41  Collection Tank 42 
Solution Hose
43  Solution Hose Hook-Up
A-3  cleaning 
f ormulas
Always use ge\fui\fe 
bissell deep clea\fi\fg 
\bormulas. No\f-bissell  
clea\fi\fg \bormulas may 
harm the machi\fe a\f\gd 
will void the guara\ftee. 
44    1.5 L 2X Wash & Protect 
Professional Formula w/ 
Scotchgard™ Protector #1089-E
45    1.5 L 2X Wash & Protect Pet 
Stain & Odour Formula w/ 
Scotchgard™ Protector #1087-E
46    1.5 L 2X Wash & Protect 
Stain & Odour Formula w/ 
Scotchgard™ Protector #1086-E
47    1.5 L 2X Wash & Refresh Natu-
ral Orange Formula #1146E
48    1 L 2X Wash & Refresh Natural 
Orange Formula #1121E
49    1.5 L 2X Wash & Refresh 
FebrezeTM/AmbipurTM 
Blossom & Breeze Formula 
#1078E/1080E
50    1.5L 2X Wash & Refresh 
Febreze™/Ambi-Pur™ Cotton 
Fresh Formula #1079E/1081E
51    1.5 2X Allergen Cleaning 
Formula #1120E
52    1 L Oxygen Boost #1134-E
53    1 L 2X Wash & Shine Hard 
Floor Solutions #1144-E
54    650 ml Tough Stain 
Precleaner #1147-E 
55  
  650 ml Pet Stain Precleaner #1137E
A-4  cleaning 
Tools
56  TurboBrush Vacuum Tool 
57  Multi-Surface Vacuum Tool
58  
Deep Clean Carpet Washing Tool59  Quick Dry Hard Floor Tool
60  Tool Caddy
B Assembly
1. Attach hose to Quick Release™ hose   
door by i\fserti\fg \bitted e\fd a\fd tur\fi\fg 
clockwise u\ftil it locks i\fto place. Close   
hose door.
2. Attach solutio\f hose to machi\fe by   
i\fserti\fg i\fto hook-up a\fd tur\fi\fg   
clockwise u\ftil it locks i\fto place.  
3. Attach two wa\fd pieces together by   
li\fi\fg up butto\f locks with holes a\fd   
locki\fg i\fto place.  be sure wa\fd piece   
with the storage bracket (see \bigure 4)   
is the lower wa\fd that will attach to tools. 
Attached assembled wa\fd to grip   
usi\fg same tech\fique.
4. Attach desired tool to lower wa\fd a\fd 
place storage backet i\fto wa\fd holder.
5. Place tool caddy o\f back o\b machi\fe \bor 
vacuumi\fg or solutio\f ta\fk \bor wet clea\fi\fg.
 C Operations
Water filter vacuuming
ImPoRTANT:  your cleaner is a water filtra-
tion cleaner. NeVeR use it in  filter Vac 
mode without clean tap water in the col-
lection tank.  you  muST fill the collection 
tank with clean tap water to the clean 
water fill line on the back of the collection 
tank for the machine to function properly. 
Vacuuming in  filter Vac mode without 
clean water in the collection tank may 
cause damage to the motor.
c -1 \fetting ready1. Ope\f Quick Release hose door, tur\f   
mode selector to “Fil TeR VAC”, the\f close 
hose door.
2. Remove top lid \brom collectio\f ta\fk a\fd   
set aside.
3. Fill collectio\f ta\fk to clea\f water \bill li\fe 
(located o\f back o\b ta\fk) with clea\f tap 
water a\fd place top lid back o\fto top o\b   
collectio\f ta\fk.
4. Attach desired vacuum tool to e\fd   
o\b wa\fd (or directly to grip \bor smaller 
accessories).
5. Plug i\fto a proper electrical socket   
a\fd push power butto\f o\f.
6.  Re\ber to sectio\f D \bor machi\fe care 
i\fstructio\fs.
  Do not plug in your cleaner until you have 
completely assembled it per the following 
instructions and are familiar with all instructions 
and operating procedures.
*  The filter media, not the vacuum as a whole, 
complies with the IEST-RP-CC001.5 HEPA standard.
Do not operate cleaner with damp or wet filters or 
without all filters in place.
To reduce the risk of fire and electric shock due 
to internal component damage, use only BISSELL 
cleaning formula intended for use with the deep 
cleaner. Non-BISSELL cleaning formula may harm the machine and 
void the guarantee. 
						

							8
Wet cleaning
c-2 \fetting ready1. Pla\f activities to give your carpets   
time to dry.
2. Thoroughly dry vacuum area to be 
clea\fed.
3. Pla\f your clea\fi\fg route to leave a\f   
exit path.  it is best to begi\f clea\fi\fg i\f   
the cor\fer \barthest \brom your exit.
4. Ope\f Quick Release hose door, tur\f  
 mode selector to “WeT CleAN”, the\f   
close hose door. 
5. Remove tool caddy \brom back o\b   
machi\fe i\b i\f place.
6. U\fscrew measuri\fg cap \brom solutio\f 
ta\fk. Fill solutio\f ta\fk with hot tap water   
to \bill li\fe. Add o\fe \bull measuri\fg cap o\b 
\bormula the\f screw cap tightly back o\fto 
solutio\f ta\fk.
ImPoRTANT:  be sure to use  bISSell 
advanced formulas for carpet and   
upholstery when cleaning carpet, rugs   
and upholstery. 
7.  Place solutio\f ta\fk back i\f the machi\fe.
8. Attach desired wet clea\f tool to e\fd   
o\b wa\fd (or directly to grip \bor smaller 
accessories). 
9.  Plug i\fto a proper electrical socket a\fd 
push heater, power a\fd wet clea\f butto\fs o\f.
Note: Allow one minute for the built-in 
heater to warm up before cleaning. The 
cleaner will be fully warmed and will   
provide optimal performance after one   
minute of continuous heated cleaning. 
c -3  \beep  clean  carpet Washing1. Place tool directly o\f carpet. Push spray 
trigger to spray clea\fi\fg solutio\f while   
pulli\fg wa\fd towards you.
2. Keep \fozzle o\b tool \birmly agai\fst the   
carpet sur\bace, co\fti\fue to make slow   
\borward a\fd backward wet passes u\ftil \fo 
more dirt ca\f be removed. Do \fot overwet.
3. Release spray trigger a\fd make slow   
\borward a\fd backward dry passes over   
the same area to remove a\fy residual   
dirty water.
4. Co\fti\fue to clea\f e\ftire carpet worki\fg   
i\f o\fe meter by o\fe meter sectio\fs.
5.  i\b machi\fe loses suctio\f, stop sprayi\fg 
a\fd check collectio\f ta\fk level.  empty  
i\b \bull.
6.  i\b machi\fe stops sprayi\fg, tur\f o\b\b   
wet clea\f butto\f immediately a\fd check 
solutio\f ta\fk level. Re\bill i\b empty.  ImPoRTANT: Never run in Wet 
clean mode 
when the solution formula tank is empty   
or missing.
7.   Re\ber to sectio\f D \bor machi\fe care 
i\fstructio\fs.
c -4  upholstery  cleaning1. importa\ft!  i\b usi\fg to wet clea\f upholstery, 
check the upholstery tags proceedi\fg.
   a .  Check ma\fu\bacturer’s tag be\bore c  
lea\fi\fg. “W” or “W s” o\f the tag mea\fs 
you ca\f use your clea\fer.   i\b the tag 
is coded with a\f “X” or a\f “s” (with a 
diago\fal stripe through it), or says “Dry 
Clea\f O\fly”, do \fot proceed with wet 
clea\fi\fg. Do \fot use o\f velvet or silk.  
i\b ma\fu\bacturer’s tag is missi\fg or \fot 
coded, check with the \bur\fiture maker or 
the \bur\fiture dealer.
   b .  Check \bor colour\bast\fess i\f a\f   
i\fco\fspicuous place.
   c .  i\b possible, check upholstery stu\b\bi\fg. 
Coloured stu\b\bi\fg may bleed through 
\babric whe\f wet.
   d .  Pla\f activities to allow upholstery 
time to dry.
   e .  Vacuum thoroughly.  
2. Re\ber to the “Getti\fg Ready to Wet Clea\f”.
3. Attach desired wet clea\fi\fg tool   
directly to grip.
4. Place tool directly o\f sur\bace. Press spray 
trigger to spray clea\fi\fg solutio\f while   
pulli\fg tool towards you.
5. Keep \fozzle o\b tool \birmly agai\fst sur\bace 
a\fd co\fti\fue to make slow \borward a\fd 
backward wet passes u\ftil \fo more dirt ca\f 
be removed.  caution: \bo not overwet.
6. Release spray trigger a\fd make slow   
\borward a\fd backward passes over same 
area to remove a\fy residual water.
7.  Co\fti\fue to clea\f e\ftire sur\bace.
8. Re\ber to sectio\f D \bor machi\fe care 
i\fstructio\fs.
c -5 Hard  floor cleaning1. Ope\f Quick Release hose door, tur\f mode 
selector to “WeT CleAN”, the\f close hose 
door.   
2. Remove tool caddy \brom back o\b machi\fe 
i\b i\f place.
3. U\fscrew measuri\fg cap \brom solutio\f 
ta\fk.  Fill solutio\f ta\fk with hot tap water 
to \bill li\fe. Add o\fe \bull measuri\fg cap o\b 
\bormula the\f screw cap tightly back o\fto 
solutio\f ta\fk.
www. bissell.com
   
    
						

							ImPoRTANT: be sure to use  bISSell Hard 
floor Solution when cleaning sealed hard 
floor surfaces.
4. Place solutio\f ta\fk back i\f the machi\fe.  
5. Attach Micro\biber mop pad to quick dry 
hard \bloor tool by attachi\fg e\fds to Velcro 
strips o\f top o\b tool.
6. Attach quick dry hard \bloor tool to e\fd   
o\b the wa\fd.
7.  Plug i\fto a proper electrical socket a\fd 
push heater, power a\fd wet clea\f butto\fs o\f.
8. Place tool directly o\f the hard \bloor   
sur\bace, resti\fg o\f the pad.
9.  Press spray trigger to moiste\f mop pad 
with clea\fi\fg solutio\f.   
Cautio\f: Do \fot oversaturate.
10.  Move tool back a\fd \borth across \bloor; 
usi\fg solutio\f, brushes a\fd mop pad to 
clea\f. Press spray trigger as \feeded.
11. With the spray trigger released, tilt the 
tool \borward a\fd pull back across clea\fed 
\bloor to remove a\fy residual water. This will 
create the best suctio\f a\fd will help get the 
hard \bloor sur\bace as dry as possible.
12. Co\fti\fue to clea\f e\ftire \bloor.  
13. Whe\f \bi\fished, be sure to remove 
Micro\biber mop pad a\fd clea\f by ha\fd   
or machi\fe wash as \feeded. Allow to   
dry completely be\bore \fext use. 
14. Re\ber to sectio\f D \bor machi\fe care 
i\fstructio\fs.
D Care,   
Maintenance & Storage
\b-1  machine care
1. Push heater, power a\fd wet clea\f butto\fs 
o\b\b. U\fplug machi\fe.
2.  Ope\f Quick Release™ hose door a\fd 
remove collectio\f ta\fk by li\bti\fg straight up 
usi\fg ta\fk ha\fdle.
3.  Remove top lid \brom collectio\f ta\fk, ri\fse 
a\fd air dry.
4.  empty dirty water i\fto a si\fk, toilet or out-
side by pouri\fg dirt water out \brom cor\fer o\b 
ta\fk. Ri\fse i\fside o\b collectio\f ta\fk.
5. Remove mode selector by tur\fi\fg to 
“ReMOVe” a\fd pulli\fg straight out.  
6. O\fce model selector is removed, remove 
water \biltratio\f tower by li\bti\fg up a\fd rotat-
i\fg clockwise so \bro\ft o\b tower is \baci\fg side 
o\b collectio\f ta\fk. The\f pull up a\fd out   
o\b collectio\f ta\fk.
7.  Ri\fse collectio\f ta\fk, mode selector a\fd 
water \biltratio\f tower. Allow to air dry com-
pletely be\bore replaci\fg water \biltratio\f tower 
a\fd mode selector back i\fto collectio\f ta\fk.
   a .  To replace \biltratio\f tower back   
i\fto collectio\f ta\fk, drop i\fto top o\b   
collectio\f ta\fk a\fd rotate cou\fterclock -
wise so \bro\ft o\b tower is \baci\fg \bro\ft o\b 
collectio\f ta\fk.  be sure to alig\f with 
tabs i\f bottom o\b collectio\f ta\fk.
   b .  O\fce water \biltratio\f tower is 
replaced, replace mode selector by 
i\fserti\fg back i\fto \bro\ft o\b machi\fe.  
Make sure mode selector is i\f 
“ReMOVe” positio\f whe\f i\fserti\fg back 
i\fto machi\fe. Tur\f either clockwise to 
“Fil TeR VAC” or cou\fterclockwise to 
“WeT CleAN” to lock back i\f place.
8. For wet clea\fi\fg, remove all tools that 
were used a\fd ri\fse with clea\f tap water. 
Allow to dry completely be\bore stori\fg.
9.  Remove hose, taki\fg care to keep both 
e\fds up to avoid spilli\fg.  empty out  
a\fy remai\fi\fg water a\fd ri\fse clea\f with 
clea\f tap water. Allow to dry completely 
be\bore stori\fg or placi\fg back o\f machi\fe.
\b-2  maintenance
1. Pre-motor \bilter: Remove \brom top lid by 
pulli\fg tab away \brom separator a\fd pull-
i\fg straight out.  i\fspect \boam \bilter.  i\b dirty, 
ri\fse with clea\f tap water a\fd allow to dry 
completely be\bore replaci\fg back i\fto sepa-
rator. To attach separator back o\fto to top 
lid, li\fe up “T” pieces u\fder shallow grooves 
o\f top lid a\fd push together u\ftil tab clicks 
together. 
2. HePA Media \bilter*: Remove \bilter door by 
pressi\fg dow\f o\f latch a\fd pulli\fg dow\f. 
O\fce \bilter door is ope\f, place o\fe ha\fd o\f 
each side o\b \bilter a\fd pull it out o\b machi\fe.  
i\b dirty, replace with \few \bilter or ri\fse u\fder 
clea\f tap water a\fd allow to dry completely 
be\bore replaci\fg back i\fto machi\fe.  be sure 
\bilter door is \bully closed a\fd latched prior to 
operati\fg machi\fe. 
\b-3  machine storage
Water a\fd clea\fi\fg \bormula ca\f be le\bt   
i\f solutio\f ta\fk \bor \fext use.
1. Wrap power cable arou\fd cable wrap   
o\f back o\b the machi\fe.
2.  store u\fit i\f a protected, dry area, at   
room temperature (4° to 43° C).
9www. bissell.com
      
WARNIN\f
to reduce the risk of fire and   
electric shock, always install float  
before any wet pick -up operation.
*The filter media, not the vacuum as a whole, 
complies with the IEST-RP-CC001.5 HEPA standard. 
						

							©2013 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 160-1794  Rev 5/13
Visit our website at: www.BISSELL.com
Consumer Guarantee 
This Guarantee only applies outside of the USA and Canada. It is 
provided by BISSELL International Trading Company BV (“BISSELL”).
This Guarantee is provided by BISSELL.  It gives you specific rights. 
It is offered as an additional benefit to your rights under law. You 
also have other rights under law which may vary from country 
to country. You can find out about your legal rights and remedies 
by contacting your local consumer advice service. Nothing in this 
Guarantee will replace or lessen any of your legal rights or remedies.  
If you need additional instruction regarding this Guarantee or have 
questions regarding what it may cover, please contact BISSELL 
Consumer Care or contact your local distributor. 
This Guarantee is given to the original purchaser of the product from 
new and is not transferable. You must be able to evidence the date 
of purchase in order to claim under this Guarantee.
limited Two-year \fuarantee
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, 
BISSELL will for two years from the date of purchase by the 
original purchaser repair or replace (with new or remanufactured 
components or products), at BISSELL’s option, free of charge, any 
defective or malfunctioning part or product.
BISSELL recommends that the original packaging and evidence 
of the date of purchase be kept for the duration of the Guarantee 
period in case the need arises within the period to claim on the 
Guarantee. Keeping the original packaging will assist with any 
necessary re-packaging and transportation but is not a condition of 
the Guarantee.
If for your product is replaced by BISSELL under this Guarantee, 
the new item will benefit from the remainder of the term of this 
Guarantee (calculated from the date of the original purchase). The 
period of this Guarantee shall not be extended whether or not 
your product is repaired or replaced.
*eX cePTIoNS AN\b eX cluSIoNS fRom 
THe TeRmS of THe \fu ARANTee
This Guarantee applies to products used for personal domestic use and 
not commercial or hire purposes.  Consumable components such as 
filters, belts and mop pads, which must be replaced or serviced by the 
user from time to time, are not covered by this Guarantee.  
This Guarantee does not apply to any defect arising from fair wear 
and tear. Damage or malfunction caused by the user or any third 
party whether as a result of accident, negligence, abuse, neglect, or 
any other use not in accordance with the User Guide is not covered 
by this Guarantee. 
Visit the bISSell website: www.bISSell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: _____________ Please record your Purchase Date: _____________
NO\fE: P\bease keep your origina\b sa\bes receipt. It provides proof of the date  
of purchase in the event of a Guarantee c\baim. See Guarantee for detai\bs.
An unauthorised repair (or attempted repair) will void this Guarantee 
whether or not damage has been caused by that repair/attempt.
Removing or tampering with the Product Rating Label on the   
product or rendering it illegible will void this Guarantee. 
SAVE AS SET OUT BELOW BISSELL AND ITS DISTRIBUTORS ARE NOT 
LIABLE FOR ANY LOSS OR DAMAGE THAT IS NOT FORESEEABLE 
OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY 
NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT INCLUDING 
WITHOUT LIMITATION LOSS OF PROFIT, LOSS OF BUSINESS, BUSINESS 
INTERRUPTION, LOSS OF OPPORTUNITY, DISTRESS, INCONVENIENCE OR 
DISAPPOINTMENT.  SAVE AS SET OUT BELOW BISSELL’S LIABILITY WILL 
NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
BISSELL  DOES NOT EXCLUDE  OR LIMIT  IN ANY  WAY  ITS LIABILITY  FOR 
( A )  DEATH  OR PERSONAL  INjURY CAUSED  BY OUR  NEGLIGENCE  OR THE  
NEGLIGENCE  OF OUR  EMPLOYEES,  AGENTS OR SUBCONTRACTORS; (B ) 
FRAUD  OR FRAUDULENT  MISREPRESENTATION; ( C) OR  FOR  ANY  OTHER  
MATTER  WHICH CANNOT  BE EXCLUDED  OR LIMITED  UNDER LAW.
Consumer Care
If your BISSELL product shou\bd require 
service or to c\baim under our Limited 
\fwo-Year Guarantee, p\bease visit:
Website or  e-mail:www.bissell.com
for  uK inquiries, call or write:
BISSELL Homecare (Overseas) 
Ground Floor 
226 Berwick Avenue, Slough 
Berkshire, SL1 4QT , United Kingdom 
Mon-Thurs 9 am-5pm, Friday 9 am-4pm 
Telephone: 0844-888-6644
f or  middle  east inquiries, call or write:
BISSELL Middle East & Africa FZE 
P.O. Box 61286 
Office 017, Technopark Building  
Jebel Ali Free Zone  
Dubai , United Arab Emirates  
Sunday-Thursday 9am- 6pm 
Telephone: 971-4-881-8597
Replacement parts and accessories are 
available \for purchase. \bo purchase visit 
www.BISSELL.com