Bisell Easy Sweep 9974e User Manual

2Thank You
USER'S GUIDE
9974 SerieS 220-240 V
Safety instructions
Product view
Assembly
Operations
Maintenance and care
TroubleshootingReplacement parts3
4
4-5
5
6
7
7
Warranty
Consumer Care8
8 

Thanks for buying a BISSELL EasySweep™ Sweeper
We’re glad you purchased a BiSSeLL easySweep sweeper. everything  
we know about floor care went into the design and construction of this 
complete, high-tech home cleaning system.
Your BiSSeLL easySweep sweeper is well made, and we back it with a   
limited one year warranty. We also stand behind it with a knowledgeable, 
dedicated Consumer Care department, so, should you ever have a   
problem, you’ll receive fast, considerate assistance.
My...

IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
Read all instRuctions 
befoRe using youR bissell  
easy sWeep.
   WaRning  - 
to reduce the risk of 
fire, electric shock, or 
injury:
  
■  Store indoors.
■ Do not expose to rain.
■ Do not immerse.
■ Do not handle with wet hands.
■ Do not use EasySweep if it has been 
dropped, damaged, left outdoors or 
dropped into water, have it repaired at an 
Authorized Service...

Assembly 
4
Product view
Dirt Container Release Power SwitchCharging Indicator Light
Swivel Connector 
Metal Extension 
Handle Assembly Non-Slip 
 
Handle Grip
Charging Port
Handle Assembly
DC Adapter
the easysweep requires very little assem-
bly. Remove it from the box and check  
it against the illustration to familiarize  
yourself with the components listed. the  
exploded view diagram with part names  
will also be helpful if you should need to  
order a part at a later time.
1.  Assemble the handle...

Assembly 
5
charging the battery
1. When completely charged, the 
EasySweep provides up to 45 minutes of 
cleaning time. 
2.  When charging for the first time, allow 
to charge uninterrupted for at least 16 
hours. Thereafter, charge at least 16 
hours to fully renew the EasySweep  
battery. The charging indicator light will 
illuminate when properly connected and 
will not turn off when fully charged.
note: the power switch must be in 
the off position when charging.
3. Decreased operating time may...

Maintenance and care
6
emptying dirt cup
the dirt cup should be emptied after 
each use.
1. Make sure the EasySweep is in the 
“oFF” position.
2.  Hold the base of the unit over a waste 
can to empty.
3.  Press the dirt container release button and 
empty the contents into the waste can. 
note: the dirt container opens from 
the bottom of the easysweep.
4. Push the dirt container door gently back 
into place.
5.  Clean exterior surfaces with a soft cloth 
dampened with water only. Do not use 
a strong...

7
Troubleshooting
no power
possible causes Remedies
1. EasySweep is not charged thoroughly  1. Make sure EasySweep has been properly plugged into an   
    outlet for the recommended amount of time. See “Charging   
    the Battery” on page 5
easysweep operating but not picking up mess
possible causes  Remedies
1. The dirt container may be full  1. Empty out the dirt container (see Maintenance and   
    Care on page 6)
2.  Debris may be lodged in the EasySweep or may be too heavy for  2. Empty out the...

Warranty- BISSELL EasySweep
8
This warranty gives you specific legal rights, and you may also have oth\
er rights which may vary from country to country. If you need additional instruction regarding this warranty or have que\
stions 
regarding what it may cover, please contact BISSELL Consumer Care by E-mail, telephone, regular 
post as described below, or contact your local in country distributor.
limited one y ear Warranty
Subject to the *EXCEPTIoNS AND EXCLUSIoNS identified below, BISSELL will repair...