Bisell CleanView LiftOff Carpet Cleaner 22K7E User Manual

www.bissell.com 11
Operations
Portable spot cleaning mode
Preparing the machine
1. Step on the portable spot cleaning pedal to 
release the portable spot cleaner.  
2.  Release flex hose by twisting the hose 
secure latch clockwise. Unwrap flex 
hose completely. 
3.  Attach the desired tool to the hose grip 
until it snaps together. Make certain the 
tool is securely attached. 
4.  Twist the Quick Release cord wrap clock-
wise to unwrap the power cord com-
pletely and plug into grounded outlet.
Filling...

www.bissell.com 
Operations 
12
Cleaning with Deep Reach™ Tool 
(select models only)
1.  Set tool on soiled surfaces and press the 
spray trigger to spray solution onto the 
soiled area to be cleaned. 
2.  Slowly move the tool back and forth over 
the soiled surface, keeping the tool in con-
tact with the carpet. 
Release spray trigger and move tool 
slowly over the soiled area to suction up 
water and dirt. 
4. Continue to clean the area, working in 
small sections, until no more dirt can be 
removed....

www.bissell.com www.bissell.com 13
Maintenance and care  
Machine care (check regularly)
Cleaning suction gate
The suction gate automatically diverts 
air when the portable deep cleaner 
is detached. This should be checked 
and cleaned regularly for any dirt and 
debris.
1. Step on the pedal and remove the 
portable spot cleaner. Remove dirty 
tank.
2.  Remove two screws and pull off   
suction gate door.
3.  Wipe suction gate clean and rinse  
suction gate door.
4.  Replace suction gate door and two...

www.bissell.com 
Maintenance and care  
14
Occasional replacement of one or 
both belts may become necessary. 
If that is needed, please follow the 
instructions below.
1.  Turn off the machine, and unplug it from   
the outlet. Remove portable spot cleaner.
2.  Remove the nozzle by unscrewing three 
screws on the nozzle cover.
3.  Turn the machine on its side.  
IMPORTANT: with portable spot 
cleaning pedal facing down.
4.  Remove end cap by unscrewing the 
3 screws. Take care not to drop the 
screws...

www.bissell.com 15
Maintenance and care  
 
Brushes can be removed for cleaning 
or replacement as needed. 
1. Follow small belt removal Instructions on   
page 14 items 1-7.
2.  Remove brush rolls by pulling them off 
of the metal rods. Be careful not to 
lose the small washer at each 
end of the brush rolls.
3.  Re-attach the large belt to the grooves 
on the end of the new brush rolls. If the 
belt is damaged, replace with a new 
belt.
4.  Place cleaned or new brush rolls back 
onto the rods. Make...

www.bissell.com 
Troubleshooting 
16Built-in heater ready light does not illuminate
Possible causes 
Remedies
1.  The power is not turned ON    1.  The power must be ON to activate the heater ready light
2.   The portable spot cleaner is not attached completely  2.  Make sure the portable spot cleaner is attached   
    Push down firmly to check
Reduced Spray or No Spray
Possible causes  Remedies
1.  Formula & water tank may be empty  1.  Refill tank
2.  Formula & water tank may not be seated completely...

www.bissell.com 17
Accessories & formulas
Item Part No.  Part Name 1 203-6651  3” Tough Stain Tool
 2  203-6652  Powered TurboBrush™ Hand Tool
 3  203-6653  4” Upholstery Tool
 4  203-6654  6” Stair Tool
 5  203-7885  Spraying Crevice Tool 
 6   203-8113  Deep Reach™ Tool
 7  310-3040  Mesh Bag
 8   81L5-E  1.5 L 2X Wash & Protect Professional Formula w/ Scotchgard™ Protector
 9   66W9-E  1.5 L 2X Wash & Protect Pet Stain & Odour Formula w/ Scotchgard ™
 Protector
10  92F4-E  1.5 L 2X Wash & Protect...

Below please find a list of common replacement parts. While not all of these 
parts may have come with your specific machine, all are available to you fo\
r 
purchase, if desired.
Item Part No.  Part Name
1 203-7893  Formula & Water Tank Assembly (includes cap and insert)
2.  203-6675  Cap and Insert for Formula & Water Tank
3.  203-8102  Dirty Tank Assembly (includes entire tank)
4.  203-7904  Cord Wrap
5.  203-7896  End Caps with Edge Brushes (2 pack, includes screws)
6.  203-7897  Spray Tips Assembly...

www.bissell.com 19
Warranty - BISSELL CleanView® Lift-Off®
 This warranty gives you specific legal rights, and you may also have oth\
er rights which may 
vary from country to country. If you need additional instruction regarding this warranty or have 
questions regarding what it may cover, please contact BISSELL Consumer Services by  
telephone, or regular post as described below, or contact your local in country distributor.
Limited Five Year Warranty
 Subject to the *EXCEPTIONS AND EXCLUSIONS...

BISSELL consumer services
©2012 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 120-4421
Rev 10/11
Visit our website at:
www.bissell.com
Scotchgard is a trademark of 3M
Microban
® is a registered trademark 
of Microban Products Company
www.bissell.com 20
If your BISSELL product should require service:Call BISSELL Consumer Services at the numbers below and we will give you the location of a 
BISSELL Authorized Service Center in your area. If you have...