Bisell CleanView Compact Dual Cyclonic 15D6e User Manual

2Thank You
USER'S GUIDE
15D6 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingReplacement Parts3
4
5
6-7
8-12 13
14
Warranty
Consumer Services15
16 

www.bissell.com 
Thanks for buying a BISSELL Cleanview Compact Dual Cyclonic 
We’re glad you purchased a BISSELL Cleanview Compact Dual Cyclonic 
vacuum. Everything we know about floor care went into the design 
and construction of this complete, high-tech home cleaning system.
Your BISSELL Cleanview Compact Dual Cyclonic vacuum is well made, and 
we back it with a limited one year warranty. We also stand behind it with 
a knowledgeable, dedicated Consumer Services department, so, should 
you ever have a...

When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
REaD aLL   
InSTR uCTIonS  
BEfoRE uSIng youR   
upRIghT V aCuuM. 
 
   WaRnIng : To  
reduce the risk of fire, 
electric shock, or injury:
 ■  Do not use outdoors or on wet surfaces.
■ Do not leave machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has 
been dropped, damaged, left outdoors, or 
dropped into water, return it to a service...

www.bissell.com 4
product view
CAUTION:  Do not plug in your vacuum 
cleaner until you are familiar with 
all instructions and operating 
procedures.
* The filter media, not the vacuum as a whole,  
complies with the IEST-RP-CC001.5 HEPA Standard.
Handle
Crevice Tool Dusting/ 
Upholstery 
Tool
Hose Wand 
Base
Foot Hose
Detent Lever Power Cord
Carry Handle
Upper Tank
Easy Empty 
Dirt Container Lock ‘n Seal
™ 
Lever
HEPA Media 
Filter* & Foam 
Motor Filter Quick Release 
Cord Wrap
Foot Window Cyclone
Pet...

www.bissell.com 
assembly 
The only tool you’ll need to assemble 
your vacuum is a screwdriver.
Attach handle to vacuum
1. Locate the vacuum handle and remove 
the screw packet taped to the handle.
2.  Stand the vacuum upright and from the 
rear of the unit, slide the base of the 
handle firmly into the grooves at the top 
of the vacuum body.
3.  Ensure the handle fits firmly to the vacu-
um body. If there are any gaps, continue 
to push firmly until the handle is secure.
4.  Insert the provided screw...

www.bissell.com 
operations
6
Power Switch
The power switch is located on the left 
side of the vacuum.  Push the rocker 
switch “ON” (1) to vacuum, and “OFF” 
(0) when cleaning is complete.
Handle position
Press the handle release pedal, located 
on the lower left side of the vacuum, 
with your foot to place your vacuum 
into one of three cleaning positions.
1. Upright- For storage and above floor   cleaning with tools.
2.  Normal Cleaning- Press handle release 
pedal once. Use for most household floor...

www.bissell.com 7
operations
Special tools
Your vacuum is not only a powerful 
carpet and rug vacuum cleaner, it’s also 
a versatile above floor vacuum cleaner 
when you select one of the special tools.
1. Raise handle to upright position.
2.  Remove hose from hose wand base.
3.  Attach one of the tools by firmly pushing  
it onto the vacuum hose. Be sure the  
hose and tool fit together by twisting 
tightly.
  Dusting Brush: Use on furniture or  
upholstery.
  Crevice Tool: Use in tight, narrow spaces....

www.bissell.com 
Maintenance and care
8
To maximize your cleaning perfor-
mance and extend the life of your 
vacuum, it is very important that you 
empty your dirt container and check 
and clean your filters frequently.  
Perform the following maintenance 
steps
1. Empty the dirt container when the dirt 
reaches the “full” line on the dirt con-
tainer, or more frequently, to prevent 
overfills. For best performance, empty 
after each use.
2.  Check the foam motor filter and the 
HEPA media filter* at...

www.bissell.com 9
Maintenance and care
1. Unplug the vacuum from electrical outlet.
2.  The foam motor filter protects the motor 
from dirt particles. It is located in the 
slide out tray underneath the dirt con-
tainer. If the filter becomes dirty, pull out 
the tray, lift out the foam filter pad and 
clean it.
NOTE: The foam motor filter may 
be hand washed in cold water 
with mild detergent. Rinse well 
and air dry thoroughly before 
replacing.
3. The HEPA media filter* assists in the 
filtration...

www.bissell.com 
Maintenance and care
10
 
You should check your vacuum cleaner’s 
rotating floor brush and drive belt regu-
larly for wear or damage. You should 
also clean the brush and brush ends of 
strings, hair and carpet fibers. This type 
of debris can wrap around the brush 
and hamper its ability to effectively 
clean your carpet. Also remove any 
debris that has accumulated under the 
brush cover.
1. Unplug the vacuum from electrical outlet.
2.  Place handle in low position and turn   
vacuum...