Bisell Cleanview Bagless Power Trak 3593E User Manual

USER’S GUIDE
3593 SERIES – 220/240V
plus
Safety Instructions3
Product View4
Assembly Instructions5-6
Operation / Special Tools7-9
Maintenance9-12
Troubleshooting13
Warranty16
Consumer Services14
Replacement Parts15
CleanView™ 
BAGLESS
POWER TRAK™ 

2
Thanks For Buying A BISSELL CleanView Bagless Power Trak Plus
We’re glad you purchased a BISSELL CleanView Bagless Power Trak Plus 
Vacuum. Everything we know about floor care went into the design and 
construction of this complete, high-tech home vacuuming system.
Your BISSELL CleanView Bagless Power Trak Plus is well made, and we back it 
with a limited comprehensive two-year warranty. We also stand behind it with 
a knowledgeable, dedicated Consumer Services Department, so, should you 
ever have a...

3
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, 
basic precautions should be observed, 
including the following:
READ ALL INSTRUCTIONS 
BEFORE USING YOUR 
UPRIGHT VACUUM. 
Always connect to a properly Earthed Outlet. Unplug 
from outlet when not in use and before conducting 
maintenance or troubleshooting.
WARNING: To reduce 
the risk of fire, electric shock, 
or injury:
 
■    
Use indoors only.
■  Do not leave machine when it is plugged in.
■  Do not service machine when it is...

4
 CAUTION: 
Do not plug in your vacuum 
cleaner until you are familiar 
with all instructions and 
operating procedures.
Power Switch Carrying
Handle
Crevice Tool
HEPA Media 
Post-Motor Filter Quick Reach™ 
HandleHandle
Quick Release
™ 
Cord Wrap
Stretch Hose 
Extension Wand
Power Cord
Furniture Protection 
Guard
Height 
Adjustment 
KnobUpper Tank
Dirt Container
Pre-Motor Filter
Lock ’n Seal
™ 
Lever
Dusting Brush/
Upholstery ToolHose Wand
Upper Tank Knob
Hose Clip
Power Trak™ 
Window
Hose 
Wand Base...

How To Use This Guide
This User’s Guide has been designed to help you get the 
most satisfaction from your BISSELL CleanView Bagless 
Power Trak Plus. You’ll find assembly and operating 
instructions, safety precautions, as well as maintenance 
and troubleshooting instructions. Please read this 
Users Guide thoroughly before assembling your 
vacuum cleaner. 
Pay particular attention to the product diagram, 
assembly instructions, and part names. Locate and 
organize all parts before assembly. Familiarize...

Position the Twist ‘n Snap Hose assembly on the back 
of the vacuum.
Line up the tabs on the base of the Twist ‘n Snap 
Hose with the corresponding notches on the hose 
collar as shown.
Turn the Twist ‘n Snap Hose to the right to lock the 
hose into place.
Grasping the Quick Reach Handle, slide the end of 
the Hose Wand onto the Hose Wand Base. Snap the 
Hose into the Hose Clip.
NOTE: The Powerfoot will not operate 
effectively unless the Hose Wand is 
firmly attached.
Slide the Extension Wand and the...

Press the Handle Release Pedal with your foot to place 
your vacuum into one of three cleaning positions.
Upright- For storage and above floor cleaning with tools.
Normal Cleaning- Press Handle Release Pedal once. Use 
for most household floor cleaning tasks.
Low Cleaning- With the vacuum in normal cleaning 
position, press Handle Release Pedal again. Use for 
reaching under low furniture such as tables, chairs 
or beds.
 The Powerfoot/Rotating Floor Brush on your vacuum 
can be adjusted to clean several...

The Clean Filter Indicator tells you when airflow in 
the vacuum is reduced due to dirty Filters or a clog 
in the hose. The Clean Filter Indicator will remain 
green until the airflow is reduced. At that time, it 
begins to change to red. When it is fully red, the 
airflow is significantly reduced or blocked. Follow 
the steps on page 10 to clean your Filters. All Filters 
in the vacuum should be cleaned or replaced when 
the Clean Filter Indicator turns red.
If the indicator remains red after all...

Power Cord Storage
1.
2.
3.
When you are done using your vacuum, return it to 
the Upright position and store the Power Cord. 
Turn vacuum cleaner OFF.
Unplug Power Cord by grasping the plug (NOT the cord) and 
disconnect from outlet.
Loop Power Cord around Cord Wraps on side of 
vacuum cleaner. 
To maximize your cleaning performance and extend the 
life of your vacuum, it is very important that you empty 
your dirt container and check and clean your Filters 
frequently. Perform the following maintenance...

10
Use only BISSELL Style 7 Replacement Upper Tank 
Filters in your CleanView Bagless Power Trak Plus.
Unplug the cleaner from electrical outlet.
The Upper Tank Filter can be reached by removing the Dirt 
Container, reaching underneath the Upper Tank and turning 
the rim of the Filter Frame to unlock. Pull straight down to 
remove. Brush the dirt off the Louvers and Upper Tank Filter.
The foam Upper Tank Filter may be removed and hand 
washed in cold water with mild detergent. Rinse well then 
air dry...