Bisell BISSELL Wash 54K28 User Manual

USER'S GUIDE
54K2 SERIES 220-240V
2Thank You
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingReplacement Parts
3
4
5
5-7
8
9
10
Guarantee
Consumer Care11
12
QUICKwash
™   

www.bissell.com 
Thanks for buying a BISSELL deep cleaner 
We’re glad you purchased a BISSELL deep cleaner. Everything we 
know about floor care went into the design and construction of 
this complete, high-tech home cleaning system.
Your BISSELL deep cleaner is well made, and we back it with a limited 
two year guarantee. We also stand behind it with a knowledgeable, 
dedicated Consumer Care department, so, should you ever have a 
problem, you’ll receive fast, considerate assistance.
My...

www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
Read all instRuctions befoRe 
using youR deep cleaneR.
W aRning: 
to reduce the risk of fire, 
electric shock, or injury:
  
■    Do not leave appliance when plugged in.
■   Unplug from electrical socket when not in use 
and before servicing.
■   Do not modify earthed plug.
■   Use indoors only.
■   Do not allow to be used as a toy.
■   This appliance can...

www.bissell.com 4
Product view
Spray TriggerClean Water/
Solution Tank Wheels
Power 
Switch Detent 
Lever
Quick Release 
Cord Wrap
™
Power 
Cord
Lower Cord 
Wrap
Handle 
Assembly
Upper 
Body Lower 
Body Vent Cover 
(Containing 
Foam Filter)
Collection 
Tank Collection 
Tank Latch
Removable 
Nozzle
W aRning:   To reduce the risk of fire and electric shock due to internal   
component damage, use only BISSELL cleaning formlas intended 
for use with the deep cleaner. Non-BISSELL cleaning formulas   
may...

www.bissell.com 
Assembly 
1. Slide upper body into lower body. 
2.  Secure with screws.
3.  Slide handle assembly down into upper 
body until it will go no further. Align   
screw slots.
4.  Secure with screw.
5.  Place clean water/solution tank on back   
of unit.
special features
Microban® antibacterial   
product protection
Microban antibacterial product protection is   
built into key components to help prevent   
the growth of harmful common household   
bacteria. It helps to keep the unit fresher...

www.bissell.com 
0perations
6
fill the tank
1. remove the clean water/solution tank by 
lifting it straight up, then away from the 
lower body.
2.  Unscrew the black cap at the bottom of 
the clean water/solution tank.
3.  fill to the formULA line with BISSELL  
2X cleaning formula. fill the rest of the 
tank with hand hot (60°C/140°f mAX) 
tap water to the water fill line. replace 
and tighten the black cap.  
note: do not boil water or  
microwave water as it can  
damage the tank.
4.  Place clean...

www.bissell.com 7
0perations
empty collection tank
1. Turn power switch off and unplug power 
cord from outlet.
2.  remove and empty collection tank.
a. release collection tank latches [1 each 
side] by pulling up from bottom of latch 
and then out. 
b. Carefully remove collection tank from 
lower body by lifting handle. 
c. Carry collection tank to a toilet or sink. To 
empty, pour out contents using opening at 
back of tank.
d. rinse collection tank thoroughly. 
e. remove vent cover from top of...

www.bissell.com 
Maintenance and care
8
When you're done
1. Turn power switch off .
2.  Unplug power cord from outlet.
3.  remove and empty collection tank.
a. release collection tank latches [1 each 
side] by pulling up from bottom of latch 
and then out. 
b. Carefully remove collection tank from 
lower body by lifting handle. 
c. Carry collection tank to a toilet or sink. 
To empty, pour out contents using open-
ing at back of tank.
d. rinse collection tank thoroughly. 
e. remove vent cover from...

www.bissell.com 9
Troubleshooting
Reduced spray or no spray
possible cause Remedy
1. Clean water/solution tank empty  1. refill tank with water  
      and formula
2.  Clean water/solution    2. Soak tank cap in warm   
  tank cap clogged    water and then rinse under   
       running water
deep cleaner not picking up cleaning solution
possible cause Remedy
1. Collection tank not aligned/secured  1. Check tank for proper alignment  
      and secure with side latches
2.  Collection tank full  2. Empty...

www.bissell.com 
Replacement parts
10
While not all of these parts may not have come with your machine, all 
are available to you for purchase, if desired.
Item Part No.  Part Name
 1  160-0205  handle Assembly
 2  203-5545  Cross Action Brush
 3  203-5573  Solution Tank (Includes Cap and Insert Assembly)
 4   203-5523  Collection Tank 
 5  203-5637  hard floor Tool
 6  203-5541  Solution Tank Cap and Insert Assembly
 7  203-5527  foam filter
2
6 3
7
4
1
5
cleaning formula: Refer to bottom of page 4 of...