Bisell BISSELL POWERGLIDE LiftOff Base ECO 4875E User Manual

							POWERGLIDELIFT-OFF
®
USER GUIDE
4875 SERIES
*Product images may vary  
						

							2
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS  
BEFORE USING YOUR VACUUM.   
When using an electrical appliance, basic precautions should be 
observed, including the following: 
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC   
SHOCK, OR INJURY:
»   Do not leave appliance when plugged in.
»   Unplug from electrical socket when not in use and 
before servicing.
»   Do not allow to be used as a toy.
»  
This appliance can be used by children 
aged from 8 years and above and 
 
persons with reduced physical, sensory 
and mental capabilities or lack of 
 
experience and knowledge if they have 
been given supervision or instruction 
concerning use of the appliance in a 
safe way and understand the hazards 
involved. Cleaning and user 
 
maintenance shall not be made by  
children without supervision.  
»     Children should be supervised to ensure 
that they do not play with the appliance.
»   Use only as described in this user guide.
»   Use only manufacturer’s recommended attachments.
»   Do not use with damaged cable or plug.
» 
   If the supply cable is damaged, it must 
be replaced by the manufacturer, its 
 
service agent or similarly qualified  
persons in order to avoid a hazard.
»   Do not immerse in water or liquid.
»   If appliance is not working as it should, has been 
dropped, damaged, left outdoors, or dropped into 
water; do not attempt to operate it and return it to 
 a service center.
»   Do not pull or carry by cable, use cable as a handle,  close door on cable, or pull cable around sharp edges 
or corners.
»   Do not run appliance over cable.
»   Keep cable away from heated surfaces.
»   Do not unplug by pulling on cable.
»   To unplug, grasp the plug, not the cable.
»   Do not handle plug or appliance with wet hands.
»   Do not put any object into openings.
»   Do not use with any opening blocked; keep free of 
 dust, lint, hair, and anything that may reduce air flow.
»  
Keep hair, loose clothing, fingers, and  
all parts of body away from openings 
and moving parts of the appliance and 
its accessories.
»   Turn off all controls before unplugging.
»   Use extra care when cleaning on stairs.
»   Do not use to pick up flammable or combustible 
 liquids, such as petroleam, or use in areas where they 
may be present.
»   Do not pick up toxic material (chlorine bleach, 
 ammonia, drain cleaner, etc.)
»   Do not use appliance in an enclosed space filled with 
vapours given off by oil base paint, paint thinner, some 
mothproofing substances, flammable dust, or other 
explosive or toxic vapours.
»   Do not pick up hard or sharp objects such as glass, 
nails, screws, coins, etc.
»   Use only on dry, indoor surfaces.
»   Keep appliance on a level surface.
»   Do not pick up anything that is burning or smoking, 
such as cigarettes, matches, or hot ashes.
»   Do not use without dust bag and/or filters in place.
»   Do not use outdoors or on wet surfaces
»   If your appliance is fitted with a nonrewireable BS 
1363 plug it must not be used unless a 13 amp (ASTA 
approved to BS 1362) fuse is fitted in the carrier con
-tained in the plug. (Spares may be obtained from your 
BISSELL supplier). If for any reason the plug is cut off, 
it must be disposed of, as it is an electric shock hazard 
should it be inserted into a mains socket
»   Do not leave machine running in the same spot without 
handle fully upright.
SAVE THESE INSTRUCTIONS   
FOR FUTURE USE
FOR OPERATION ON A 220-240 VOLT A.C. 50/60 HZ POWER SUPPLY ONLY. 
This model is for household use only.
www. BISSELL.com
        
						

							3
Thanks for buying a BISSELL vacuum
We’re glad you purchased a BISSELL 
vacuum. Everything we know about 
floor care went into the design and 
construction of this complete,  
high-tech home cleaning system.
Your BISSELL vacuum is well made, 
and we back it with a limited   
five-year guarantee. We also stand 
behind it with a knowledgeable,   
dedicated Consumer Care   
department, so, should you ever   
have a problem, you’ll receive fast, 
considerate assistance.
My great-grandfather invented the 
floor sweeper in 1876. Today, BISSELL 
is a global leader in the design,   
manufacture, and service of high 
quality homecare products like your 
BISSELL vacuum.
Thanks again, from all of us   
at BISSELL.
Mark J. Bissell  
Chairman & CEOSafety Instructions ...........2
Product View ................ 4
Assembly ................... 5
Operations ................ 5-7
Maintenance & Care ...... 8-12
Troubleshooting ............13
Replacement Parts ......... 14
Accessories ................ 15
Guarantee .................. 16
Consumer Care .............16
      www.
BISSELL.com 
						

							Product View
WARNING
Do not plug in your vacuum cleaner until 
you are familiar with all instructions and 
operating procedures.
WARNING
Plastic film can be dangerous. To avoid 
danger of suffocation, keep away from 
babies and children.
4
WARNING
To reduce the risk of electric shock, turn 
power switch off and disconnect polarized 
plug from electrical outlet before performing 
maintenance or troubleshooting checks.
1 Handle
2 Lift-Off Pod Release Button
3  Dirt Tank Release Button
4  Carry Handle
5  Power Switch
6  Brush Roll Power Switch
7  Bottom Easy Empty™ Dirt Tank
8      Filter Cover (Pre-Motor Filters (2) 
and Post-Motor Filter are located 
underneath Filter Cover)
9 Powerfoot
10  Cord Clip
11  Handle Height Adjustment Button
12    Specialty Tool (Select models 
include TurboBrush® Tool or  
Pet TurboEraser® Tool)
13  Specialty Tool Mount
14  Stretch Hose
15  Crevice Tool
16  Quick Release® Cord Wrap
17    Crevice Tool or Extension Wand 
Mount (select models)
18  Power Cord
19  Extension Wand (select models)
20  Variable Suction Ring
21  Hose Wand
22  Hose Wand Base
1
11
13
15
12
17
1920
3
2
4
8
6
21
9
5
22
14
16
18
7
10
www. BISSELL.com
   
    
						

							5
Assembly
Operations
No tools required for assembly.
Attach handle to vacuum
Locate the vacuum base and the handle. Stand 
the vacuum base upright and slide the handle 
into the opening at the top of the vacuum base. 
The handle will click into place at the highest 
height setting.
NOTE: The handle has two height settings. 
To lower or raise the handle, push the handle 
height adjustment button (designated by the 
corresponding icon pictured below) and slide 
the handle up or down until it locks into place.
Attach vacuum hose and tools
1. Attach the Twist n’ Snap™ hose by lining up 
the tabs on the hose cuff with the corresponding 
notches on the back of the vacuum. Twist the 
hose cuff clockwise to lock the hose into place.
2.  Slide the end of the hose wand into the hose 
wand base and fold the hose over the upper 
hose wrap.
NOTE: The powerfoot will not operate effective-
ly unless the hose is firmly attached to the base.
3.  Slide the crevice tool/extension wand holder 
onto the lower mount on the back of the  
vacuum as shown. Snap the crevice tool into 
the tool holder.
4. Slide the specialty tool holder onto the upper 
mount on the back of the vacuum as shown. 
Snap the TurboBrush Tool into the tool holder.
5.  Wrap the power cord around the cord   
wrap clips.
Power switch/brush switch
The power switch is located just below the handle 
on the front of the detachable pod. Push the 
switch once to turn the vacuum on and again to 
turn the vacuum off when cleaning is complete.
The brush roll power switch is located just below 
the handle on the front of the detachable pod 
above the power switch. This switch turns the 
rotating brush power on  
 and off
 . The 
switch will glow when activated.
NOTE: The brush roll power will automatically 
shut off whenever the vacuum is locked in 
its upright position. The switch will continue 
to glow if left on in the upright position or if 
the pod is detached from the vacuum base, 
although the brush will not reactivate until the 
pod is attached and the vacuum is detented.
CAUTION
Before using your vacuum, make sure that 
the dirt container is in locked position and 
that all filters (pre-motor and post-motor) 
are in place. Do not operate your vacuum 
without these filters.
1.  3. 
2. 
4. 
WARNING
Do not plug in your vacuum cleaner until 
you are familiar with all instructions and 
operating procedures.
WARNING
Plastic film can be dangerous. To avoid   
danger of suffocation, keep away from 
babies and children.
»   Your vacuum features a 
quick-release cord wrap. 
To remove the power cord 
quickly and easily, rotate the 
upper cord wrap towards 
floor, and slip power cord off 
from upper cord wrap.
Ti p
       www.
BISSELL.com  
						

							Operations
6
Handle position
1. Upright - For storage and above floor  
cleaning with special tools.
2. Normal Cleaning - Step on the left side of the 
vacuum powerfoot and pull back on the handle 
to detent the vacuum. The icon pictured to the 
right indicates where to step.
Special tools
Your vacuum is not only a powerful floor vacuum 
cleaner, it’s also a versatile stairs and above floor 
vacuum when you select one of the special tools.
NOTE: The tools can be used with the   
vacuum in the upright position or with the 
removable pod.
1.  Remove the vacuum hose by grasping the 
hose wand grip and lifting to separate from the 
hose wand base.
2.  Attach tools by firmly pushing onto the   
hose wand.
a. Crevice Tool: use in tight, narrow spaces.
b. Extension Wand (select models): use with 
desired attachment for a longer reach.
c. Bendable Extension Wand (select models): 
Attach to the extension wand and add desired 
attachment for even longer reach. Position the 
elbow in the straight or bent position for improved 
cleaning angle with different surfaces and tools.
d. TurboBrush Tool (select models): use rotating 
brush action for small, flat areas such as stairs 
and cushions. Press down gently and pull toward 
you in a raking motion; excessive force will cause 
the brush to stop rotating.
e. Pet TurboEraser Tool (select models): use   
to remove dirt and pet hair from stairs,   
upholstery, area rugs, and other small areas.   
Pull the tool toward you in a raking motion.
NOTE: The Pet TurboEraser Tool is designed to 
remove pet hair from upholstered or carpeted 
surfaces. It should not be used on pets.
f. Pet Hair Fabric Tool (select models): use   
this tool on fabrics such as drapes, beds, or   
anywhere else pet hair may collect.
g. Long Reach Dusting Tool (select models):   
use this tool for dusting large surfaces.
NOTE: The Long Reach Dusting Tool is not 
intended to be used to clean TV or computer 
screens.
h. Carry Strap (select models): use the carry 
strap to support the portable pod when cleaning 
hard to reach areas. To attach strap, remove pod 
from base of machine, place the hook into the 
back of the machine and turn clockwise until it 
snaps into place.
ATTENTION
Some frieze carpets have long delicate fibers or 
threads that may be damaged by the rotating 
brush during vacuuming.  It is recommended 
the rotating brush be turned OFF when cleaning 
this type of carpet. 
a.
h. d.
b.
c.
f.
CAUTION
Always place vacuum cleaner on floor in its fully 
upright position and make sure it is locked into 
place before removing pod or when using tools. 
Placing the vacuum in its full upright   
position automatically stops the rotating brush.
NOTICE: While vacuuming, certain carpets and low 
humidity conditions may generate small static 
discharges. The discharges are entirely harmless 
and are not associated in any way with the   
main power supply.
CAUTION
Test the carry strap to make sure it is secure 
before using. 
»   Before cleaning under low 
furniture, check area first for 
objects that might harm the 
unit or block the vacuum hose.
Ti p
g.
e.
www. BISSELL.com
        
						

							Cleaning with the removable pod
The Lift-Off ™ vacuum pod easily detaches from 
the vacuum base for cleanups on stairs and in 
other hard-to-reach areas in your home.
Before removing the pod, your vacuum must be 
in its fully upright position. You do not need to 
turn off the power before removing the pod.
1. Press the Lift-Off ™ pod release button at the 
base of the vacuum handle and lift the vacuum 
pod off its base.
2.  Grasp the hose wand grip and lift to separate 
the hose from the hose wand base.
3.  Connect the desired hose attachment to the 
hose wand, or use the hose wand on its own.
4.  When you’re finished using the desired hose 
attachment, remove the hose attachment from 
the hose wand and reconnect the hose wand to 
the hose wand base.
5.  Return the vacuum pod to the vacuum base 
by aligning the pod base to the vacuum base. 
Push the pod onto the vacuum base until it 
‘clicks’ into place.
Variable Suction Ring
When using your vacuum on high pile carpet 
and area rugs, open the variable suction ring for 
easier steering and maneuverability. 
Open the variable suction ring for less suction 
and close it for more suction.
Power cord storage
When you are done using your vacuum, return it 
to the upright position and store the power cord.
1.  Turn vacuum cleaner off.
2.  Unplug power cord by grasping the plug   
(NOT the cord) and disconnect from outlet.
3.  Loop power cord around cord wraps on side 
of the pod.
4.  Clip molded plug to power cord to secure.
Transporting Cleaner
1. To move your vacuum cleaner from room   
to room, put the handle in the upright position, 
tilt the cleaner back on its rear wheels and   
push forward.
2.  The vacuum can also be transported by   
grasping the carry handle on the Lift-Off ™   
vacuum pod.
7
Operations
WARNING
While the vacuum is in use, warm air is emitted through   
the post-motor filter on the front of the pod. The   
bottom of the pod may also become warm. 
Variable   
Suction Ring
       www.
BISSELL.com 
						

							8
Maintenance & Care
To maintain maximum cleaning performance, the 
following maintenance steps must be performed:
1. Empty the dirt container when the dirt reaches 
the “Full” line. 
2.  Check the pre-motor filters at least once a 
month and clean and replace as needed.
3.  Check and replace the post-motor filter   
as needed.
NOTE: More frequent filter cleaning may be 
necessary if you are vacuuming new carpet, 
fine dust or have allergy concerns. 
Follow the instructions on the following pages   
to perform these simple maintenance steps.
Empty Dirt Container
The dirt tank needs to be emptied when the dirt 
reaches the ‘Full’ line on the side of the tank.
1.  Unplug cleaner from electrical outlet.
2.  Remove the Easy Empty dirt tank from   
the vacuum base by pushing the tank   
release button.
3.  Hold the dirt tank over a garbage container. 
Press the bottom lid release button on the back 
of the dirt tank to empty dirt.
4.  Mount the Easy Empty dirt tank on the   
vacuum base.
NOTE: The dirt tank may be washed in warm 
water with a mild detergent. Make sure it is 
completely dry before replacing.
Cleaning the inner cyclone
Unplug the cleaner from electrical outlet.
1.  With the bottom of the Easy Empty dirt tank 
open, reach up into the tank and grasp the 
cyclone. Twist the cyclone counter-clockwise   
to unlock and pull straight down to remove.
2.  The inner cyclone and dirt tank may be wiped 
clean with a damp cloth. Make sure all parts are 
dry before replacing.
WARNING
To reduce the risk of electric shock, turn power switch off 
and disconnect polarized plug from electrical outlet before 
performing maintenance or troubleshooting checks.
WARNING
Do not operate cleaner with damp or wet filters or without 
vacuum bags and all filters in place.
3. 
2. 
1. 
www. BISSELL.com
       
						

							9
Maintenance & Care
Cleaning the pre-motor filters
1. Unplug the vacuum from electrical outlet
2.  The pre-motor filters protect the motor from 
dirt particles and are located underneath the 
dirt tank. To access the filters, first remove the 
dirt tank. Next, lift up on the tab attached to the 
filter cover.
3.  There are two pre-motor filters; one foam 
filter on top and a thinner fiber filter directly 
underneath it. If the filters appear dirty, remove 
both filters. Both pre-motor filters may be hand 
washed in cold water with mild detergent. Rinse 
well and air dry thoroughly before replacing 
the filters. The foam filter is made of two parts 
a black and yellow part joined together. When 
replacing the filter the yellow part should be 
placed towards the vacuum motor.
NOTE: The thinner fiber filter should be placed 
underneath the foam filter.
Replacing the post-motor filter
1.  The post-motor filter assists in the filtration 
process to return clean air to the room. The 
post-motor filter is located on the front of the 
vacuum underneath the filter cover. (Instructions 
for removing the filter cover listed above.)
2.  If the post-motor filter appears dirty, remove 
the filter and gently tap the filter on the edge   
of a waste basket to clear any accumulated dust 
and debris.
NOTE: The post-motor filter is a pleated filter. 
This filter is not washable and must be replaced 
when it becomes dirty.»   Select models include a 
Febreze™ pre-motor filter 
in addition to the foam 
pre-motor filter. Either filter 
should be used along with 
the fiber filter. This Febreze™ 
filter is compatible with all 
BISSELL model series 4875 
vacuums. For ordering 
information, please refer to 
the Replacement Parts   
information on page 14.
Ti p
WARNING
To reduce the risk of electric shock, turn power switch off 
and disconnect polarized plug from electrical outlet before 
performing maintenance or troubleshooting checks.
3. 
2. 
1. 
       www.
BISSELL.com  
						

							Maintenance & Care
Rotating brush and drive belt maintenance
Check your vacuum cleaner’s rotating floor 
brush and drive belt regularly for debris, wear  
or damage. Debris can wrap around the brush 
and hamper its ability to effectively clean   
your carpet.
1.  Unplug cleaner from electrical outlet.
2.  Remove detachable pod from vacuum cleaner.
3.  Recline handle and turn vacuum cleaner over 
so bottom side is up.
4.  Remove the eight screws as shown with a 
Phillips head screwdriver. Lift the brush cover off.
5.  Lift the rotating floor brush to remove. Clean 
strings, hair and other debris from the brush, 
paying special attention to the brush ends.
6.  Check air passageway for obstructions. 
Remove any debris from this area.
7.   Clean debris from the motor pulley and drive 
belt areas.
8.  Check drive belt carefully for wear, cuts or 
stressed areas. If any damage is present, discard 
old drive belt and replace. 
10
WARNING
To reduce the risk of electric shock, turn power switch off 
and disconnect polarized plug from electrical outlet before 
performing maintenance or troubleshooting checks.
4.
www. BISSELL.com