Bisell BISSELL Oxy Power Plus Carpet Cleaner 32781 User Manual

OXYPOWER
™ 
PLUS
 USER GUIDE
3278 SERIES  

www.bissell.com
      2
ImpoRtant SafEty InS tRUctIonS
»  Un\flug \brom electrical socket when not 
in use and be\bore servicing.
»    This a\f\fliance can be used by children 
aged \brom 8 years and above and \fer-
sons with reduced \fhysical, sensory and 
mental ca\fabilities or lack o\b ex\ferience 
and knowledge i\b they have been given 
su\fervision or instruction concerning use 
o\b the a\f\fliance in a sa\be way and  
understand the hazards involved. 
Cleaning and user maintenance shall not 
be...

      www.
bissell.com3
Thanks for buying a BISSELL deep cleaner
We’re glad you \furchased a BISSELL 
dee\f cleaner. Everything we know 
about \bloor care went into the design 
and construction o\b this com\flete, 
high-tech home cleaning system.
Your BISSELL dee\f cleaner is well 
made, and we back it with a limited 
two-year guarantee. We also stand 
behind it with a knowledgeable,   
dedicated Consumer Care   
de\fartment, so, should you ever   
have a \froblem, you’ll receive \bast, 
considerate...

1 Spray Trigger
2   Cleaning  Tool   
(tools vary by model)
3  Upper Handle
4  Power Cord
5  Carry Handle
6  Ready Tools™ Dial 7 
Removable Nozzle
8  EdgeSweep™ Brushes
9    Belt Access Door  
(underside of machine)
10  Cord Clip
11  Quick Release™ Cord Wrap
12 Hose 13 
Tank Carry Handle
14  Tank Latch
15  2-in-1 Water Tank
16  Power Pedal
17  Recline Pedal
Product View
www. bissell.com
      4
1
12
1716
13
15
14
10
311
2
6
9
8
7
5
4 

      www.
bissell.com5
Your deep clea\fer comes i\f four eas\b-to-  
assemble compo\fe\fts:
	 Upper	 Handle	with	Screws 	
	 Lower	 \fase	
	 Upper	 Hose/Cord	 Rac\b	
	 Lower	 Hose/Cord	 Rac\b	
The o\fl\b tool \bou will \feed to assemble \bour 
clea\fer is a Phillips head screwdriver.
1.  slide upper ha\fdle o\fto lower base a\fd secure 
with two lo\fg screws i\fto marked holes (screws 
will be taped to upper ha\fdle).
2. Attach upper hose/cord rack to back of   
the ha\fdle b\b guidi\fg hook up i\fto the...

Special features
Heatwave technology™This deep clea\fer features Heatwave Tech\folog\b 
that helps to mai\ftai\f the temperature of the 
ha\fd hot tap water \bou put i\f it to provide 
co\fsta\ft heat as \bou clea\f. The Heatwave 
Tech\folog\b automaticall\b tur\fs o\f whe\f \bou 
tur\f the machi\fe o\f. 
Scotchgard™  protectorCarpet protectio\f applied at the mill t\bpicall\b 
wears dow\f over time from heav\b foot traffic   
a\fd ever\bda\b clea\fi\fg, i\fcludi\fg deep   
clea\fi\fg. To help restore...

filling the \b-in-1 water tank
1.	Remove ta\fk from base of machi\fe b\b lifti\fg 
ta\fk carr\b ha\fdle. Carr\b like a bucket to the si\fk.
2.	 Pull upward o\f bottom edge of latch i\f the 
back of ta\fk to u\fhook a\fd remove lid. 
3.	 Pull up o\f bladder fill cover that sa\bs   
“Fill Here”. Fill the bladder with ha\fd hot 
(60°C/140°F MAX) tap water.  Do not boil or 
microwave water as it can destroy the bladder\f
4.	 Usi\fg measuri\fg cup provided, fill to i\fdicated 
fill li\fe o\f measuri\fg cup...

Operations
Empty the \b-in-1 water tank/ 
clean removable nozzle
1.	 Press power pedal  off. Remove 2-i\f-1 water 
ta\fk from base usi\fg ta\fk carr\b ha\fdle. Carr\b 
ta\fk like a bucket to a utilit\b si\fk or outside 
where \bou will dispose of dirt\b water. 
2.	 Pull upward o\f bottom edge of latch i\f the 
back of ta\fk to u\fhook a\fd remove lid.
3.	 empt\b dirt\b water from back cor\fer of ta\fk.
4.	 After each use, remove a\f\b debris trapped   
i\f red li\ft scree\f o\f base of machi\fe while...

3.	set Read\bTools dial to TOOls setti\fg. This 
will allow spra\b a\fd suctio\f from hose. 
4.	 Attach clea\fi\fg tool of \bour choice to e\fd   
of hose.
notE: If your deep cleaner came with a Deep 
Reach  tool, do not follow the cleaning tool 
instructions below\f Instead, follow the “cleaning 
with Deep Reach  tool” instructions in the next 
section\f 
5.	 Hold tool approximatel\b 2.5 cm above soiled 
surface. Press spra\b trigger to appl\b clea\fi\fg 
solutio\f to soiled area. Usi\fg brush o\f tool,...

machine care
For best results, a few simple steps ca\f assure 
\bour machi\fe is well mai\ftai\fed after clea\fi\fg  
is complete.
1.	 Flush \bour machi\fe of a\f\b remai\fi\fg residual 
solutio\f.
   a.	Fill 2-i\f-1 water ta\fk with clea\f ha\fd hot 
(60°C/140°F MAX) tap water.
   b.	Recli\fe ha\fdle a\fd press spra\b trigger   
for 15 seco\fds while maki\fg forward a\fd 
backward passes o\f the carpet. Release 
spra\b trigger a\fd make forward a\fd   
backward passes for a\fother 15 seco\fds or 
u\ftil...