BenQ W700/W710st Digital Projector User Manual

Operation 41
EnglishHiding the image
In order to draw the audience's full attention 
to the presenter, you can use BLANK on the 
projector or remote control to hide the 
screen image. Press any key on the projector 
or remote control to restore the image.  The 
word ' BLANK ' appears at the lower right 
corner of the screen while the image is 
hidden.
You can set the blank time in the SYSTEM 
SETUP: Basic > Operating Settings > 
Blank Timer  
menu to let the projector return the image...

Operation
42
English5. The message “ Screen Capturing...” displays 
while the projector is processing the image. 
Please wait.
6. If the action is successful, you see the message  “Captured Succeeded ” on the screen. The 
captured image is saved as My Screen.
No
Yes
Capture Succeeded
The captured picture has been set 
as the splash screen.
Turn “Splash Screen Lock” on
7. Restart the projector to view the captured image  displayed as the startup screen.
In the unlikely event that the capturing action...

Operation 43
EnglishFreezing the image
Press FREEZE  on the remote control to freeze the image. The word 
' FREEZE ' will display in the upper left corner of the screen.  To  r e l e a s e  t h e  
function, press any key on the projector or remote control.
Even if an image is frozen on the screen, the pictures are running on the 
video or other device. If the connected devices have active audio output, you 
will still hear the audio even though the image is frozen on screen.
Operating in a high...

Operation
44
EnglishAdjusting the sound
The sound adjustments made as below will have an effect on the projector speakers. Be sure 
you have made a correct connection to the projector audio input. See "Connection" on page 
20 for how the audio input is connected.
Computer
     PC mini jack 
mini jack 
HDMI 1/2 HDMImini jack
Component RCA mini jack
VIDEO RCA mini jack
S-VIDEO RCA mini jack
Muting the sound
To temporarily turn off the sound,
•Using the remote control
Press MUTE  to te
 mporarily...

Operation 45
EnglishPersonalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The 
following settings do not affect the projection settings, operation, or performance. 
•Menu di s
 play time in the SYSTEM SETUP: Basic  > Menu Settings  menu sets the 
length of time the OSD will remain active after your last key press. The time length 
ranges from 5 to 30 seconds in 5-second increments. Use 
/ to select a suitable time 
frame.
• Menu position in t...

Operation
46
EnglishMenu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
1. 
DISPLAY
Wall Color Off
/Light  Yellow/Pink/Light 
Green /Blue/Blackboard
Aspect Ratio Auto/Real/4:3/16:9/16 :10
A

uto Keystone On/Off
K

eystone
Position
Phase
H. Size
Digital Zoom
3D Sync Off/DLP LINK/NVID IA

 3D Vision
3D Format Frame Sequential/Top-Bottom
3D

 Sync Invert Disable/Invert
2. 
PICTURE
Picture Mode  Bright/Living...

Operation 47
English
4. 
SYSTEM 
SETUP: 
Basic
Language
Projector Position Front Table
/Rear Table/
Rear Ceiling/Front Ceiling
Menu Settings Menu display 
time
5 sec/10 sec/
15 sec/20 sec/ 
25 sec/30 sec
Menu position Center
/Top-left/Top-right/Bottom-
right/Bottom-left
Reminder 
Message On
/Off
Operation 
Setting Direct Power On
On/Off
Auto Power Off Disable/5 min/10 min/15 min/20 
min/25 min/30 min
Quick Cooling On /Off
Blank Timer Disable/5 min/10 min/15 min/20 
min/25 min/30 min
Sleep Timer...

Operation
48
English
Note that the menu items are available when the projector detects at least one valid signal. If 
there is no equipment connected to the projector or no signal detected, limited menu items 
are accessible.
5.  
SYSTEM 
SETUP: 
Advanced
Audio Settings Mute
Off/On
Volume Range : 0 ~ 10
Power on/off 
ring tone O
ff/ On
Lamp Settings Lamp Mode Normal
/Economic
Reset lamp timer
Equivalent Lamp Hour
High Altitude 
Mode Off
/On
Security 
Settings Change password
Change Security 
Settings...

Operation 49
EnglishDescription of each menu
FUNCTIONDESCRIPTION 
Wall ColorCorrects the projected picture’s color when the projection surface is 
not white. See "Using Wall Color" on page 37 for details.
Aspect RatioThere are four options to set the image's aspect ratio depending on 
your input signal source. See "Selecting the aspect ratio" on page 35  for 
details.
Auto 
KeystoneCorrects any keystoning of the image automatically. See "Correcting 
keystone" on page 33  for...

Operation
50
EnglishPicture ModePre-defined picture modes are provided so you can optimize your 
projector image set-up to suit your program type.  
See  "Selecting a picture mode" on page 37  for details.
Reference 
ModeSelects a picture mode that most suits your need for the image quality 
and further fine-tune the image based on the selections listed on the 
same page below. 
See  "Setting the User 1/User 2 mode" on page 38  for details.
BrightnessAdjusts the brightness of the...