BenQ W1100/w1200 Digital Projector User Manual

Operation 31
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture 
modes so that you can choose one to suit your 
operating environment and input signal picture type.
To select an operation mode that suits your need, you 
can follow one of the following steps.
•Press MODE/ENTER on the remote control or 
projector repeatedly until your desired mode is 
selected.
•Go to the PICTURE: Basic > Picture Mode menu and press  /  to select a desired 
mode.
The...

Operation 32
Fine-tuning the image quality
No matter what picture mode you have selected, you are able to fine-tune those settings to fit 
every presentation purpose. Those adjustments will be saved to the preset mode you are at 
when you exit the OSD menu. Highlight PICTURE: Basic menu, press  to select a sub-
menu item to be changed and adjust the values by pressing  /  on the projector or 
remote control.
Adjusting Brightness
The higher the value, the brighter the image. And the 
lower the setting,...

Operation 33 Highlight Detail Enhancement and press  /  to adjust the value from 0 to 10 to 
enhance the image.
Selecting a Color Temperature
Highlight Color Temperature in the PICTURE: Advanced menu and adjust the values by 
pressing  /  on the projector or remote control.
Choose a preferred color temperature from among Warmer/Warm/Normal/Cool/Cooler.
*About color temperatures:
There are many different shades that are considered to be white for various purposes. One 
of the common methods of...

Operation 34This adjustable item utilizes a new color-processing algorithm and system level 
enhancements to enable higher brightness while providing true, more vibrant colors in 
picture. The range is from 1 to 3. If you prefer a stronger enhanced image, adjust toward the 
maximum setting. For a smoother, more natural image, adjust toward the minimum setting.
3D Color Management
In most installation situations, color management will not be necessary, such as in 
classroom, meeting room, or lounge room...

Operation 35 6. Press   to highlight Gain and adjust its values to your preference by pressing  / . 
The contrast level of the primary color you select will be affected. Every adjustment 
made will reflect to the image immediately. 
7. Repeat steps 3 to 6 for other color adjustments.
8. Make sure you have made all of the desired adjustments.
9. Press MENU/EXIT to exit and save the settings.
Selecting a Film Mode
Highlight Film Mode in the PICTURE: Advanced menu and select by pressing  /  on 
the...

Operation 36Press FREEZE on the remote control to freeze the image. The word 
FREEZE will display in the screen. To release the function, press any 
key on the projector or remote control.
Even if an image is frozen on the screen, the pictures are running on 
the video or other device. If the connected devices have active audio 
output, you will still hear the audio even though the image is frozen on 
screen.
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your...

Operation 37 • Using the remote control
Press MUTE to temporarily turn off the sound.
To restore the sound, press MUTE again.
• Using the OSD menu
1. Press MENU/EXIT and then press  /  until the AUDIO 
SETUP menu is highlighted.
2. Press  to highlight MUTE and press  /  to select On.
3. To restore the sound, repeat steps 1-2 and press  /  to select 
Off.
Adjusting the sound level
To adjust the sound level, 
• Using the remote control
Press   or   to select a desired sound level.
• Using the OSD menu
1....

Operation 38To  d i s p l a y  t h e  P I P  w i n d o w :
• Using the remote control
Press PIP to display the PIP page and make adjustments by following 
the steps starting from step 3 in the section Using the OSD menu 
below.
When the PIP window is on, to change the PIP window size, press PIP 
Size repeatedly until a desired size is selected.
When the PIP window is on, to change the PIP window position, press PIP Pos repeatedly 
until a desired position is selected.
When the PIP window is on, to...

Operation 39
Personalizing the projector menu display
The On-Screen Display (OSD) menus can be set according to your preferences. The 
following settings do not affect the projection settings, operation, or performance. 
•Menu display time in the SYSTEM SETUP > Menu Settings menu sets the length of time 
the OSD will remain active after your last key press. The time length ranges from 5 to 30 
seconds in 5-second increments. Use  /  to select a suitable time frame.
•Menu position in the SYSTEM SETUP >...

Operation 40
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type 
selected.
Main menu Sub-menu Options
1. 
PICTURE: 
Basic
Picture ModeDynamic/Standard/Cinema/ISF Day(for W1200 only)/
ISF Night(for W1200 only)/User 1/User 2/User3
Reference ModeDynamic/Standard/Cinema
Brightness
Contrast
Color
Tint
Sharpness
Flesh Tone
Save Settings
Reset Picture 
Settings
2. 
PICTURE: 
Advanced
Clarity ControlNoise Reduction/Detail 
Enhancement
Color...