BenQ Va371 User Manual

Using the TV21 When you’re ready to stop viewing Closed Captions, either move to a different teletext page, or 
press the Teletext button to return to normal viewing.
Whilst CC is activated:
• the Aspect button can be used to alter the teletext caption font size. 
• the Mode button will toggle the caption background between block and transparent.
• the channel up/down buttons will change to the next or previous teletext page accordingly.
To change the TV channel, you will first need to return to normal...

The On-Screen Display (OSD) menu22
The On-Screen Display (OSD) menu
OSD menu structure
The OSD menu system displays both the main menu and sub-menus at the same time: 
• the main menu category items (represented by image icons) are displayed down the left side; 
• the sub-menus (relevant to the currently selected main menu category) list to the right. 
The sub-menu list will change depending upon which main menu category is chosen.
 
The available menu items are dependent on the input source being...

The On-Screen Display (OSD) menu23
Navigating the OSD menu 
For example, to adjust image sharpness using the OSD menu:1. Press MENU on the remote control, or MENU on the TV to 
display the OSD menu on-screen.
2. Press  or  on the remote control, or CH or CH on the 
TV to select an item in the menu.
3. Press OK on the remote control, or INPUT on the TV to enter the 
submenu.
4. Press  or  on the remote control, or CH or CH on the 
TV to select an item in the submenu.
5. Press  or on the remote...

The On-Screen Display (OSD) menu24
 
Audio menu
The available menu items are dependent on the input 
source being selected.  
The illustration is for reference only.
ItemFunctionOperationRange
TrebleAdjust treble tones. Pressto increase treble 
tone,  to decrease treble 
tone.-8 to 8
BassAdjust bass tones. Press to increase bass 
tone, to decrease bass 
tone.-8 to 8
BalanceAdjust left or right speaker volume 
level.Press  to increase right 
speaker volume,  to 
increase left speaker 
volume.-16 to...

The On-Screen Display (OSD) menu25
  
Saving changes in the picture menu
Any changes to settings in the Picture menu will be saved when you exit the menu.
The factory default settings for Dynamic, Standard and Cinema Picture modes are reset when the 
Options menu Reset All is selected. See Option menu on page 30.
 
Picture menu
The available menu items are dependent on the input 
source being selected.  
The illustration is for reference only.
ItemFunctionOperationRange
Picture modeProvides complete...

The On-Screen Display (OSD) menu26
        
Setup menu
The available menu items are dependent on the input 
source being selected.  
The illustration is for reference only.
ItemFunctionOperationRange
Auto installationClears both the TV channel list and the sequential channel list, then reloads and 
searches through the designated TV frequencies for available channels, and adds 
any found to the sequential channel list, depending upon the selected country: 
• If Australia or New Zealand is selected, this...

The On-Screen Display (OSD) menu27
Tuning the TV to your region
If you purchased this TV for use in Australia, it is ready to operate out of the box. However, if 
you purchased this TV for use in a country other than Australia, you will need to perform the 
Auto-Installation setup so that the TV can tune to the local available TV stations. 
Both the Auto Installation and Manual Installation menus contain sub-menus which allow 
you to select the country and PAL TV standard which the TV will use for...

The On-Screen Display (OSD) menu28
Ordering the sequential channel list
When the TV is manufactured, by default, all of the possible Australian TV channels are 
allocated to the sequential channel list (available through the channel up or down buttons). 
You will likely want to remove all of the channels from the sequential channel list which are not 
being used in your area, so you don’t have to cycle through the unused channel positions. 
The TV will do this for you, by scanning the TV channels in your...

The On-Screen Display (OSD) menu29
Adding a channel in the sequential channel list
1. From the Setup menu, press  or  to select Manual installation and then press OK. 
2. Press  or  to select CH No, and then press OK. 
3. Pressorto select the sequential channel list position of the channel you wish to add, and 
then press OK.
4. Press  to select CH skip, and then press OK.
5. Press  or to select Added, and then press OK.
6. You can stay in this menu to add other channel positions. To add another...

The On-Screen Display (OSD) menu30
Setting up the OSD language
1. Press MENU on the remote control to display the OSD menu.
2. Press or to select Option, and then press OK.
3. Press or  to select Language, and then press OK.
4. Press  or  to select your language, and then press OK.
5. Press MENU three times to close the OSD menu.
Option menu
The available menu items are dependent on the input 
source being selected.  
The illustration is for reference only.
ItemFunctionOperationRange
LanguageSelect...