BenQ V2410t User Manual

Welcome
LCD Monitor
User Manual
V2410T
 

Copyright
Copyright © 2010 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with 
respect to the...

Table of Contents
Copyright .......................................................................................................................... 2
Disclaimer ......................................................................................................................... 2
Getting started  .................................................................................................................. 4
Getting to know your monitor...

4  Getting started  
1. Getting started
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
BenQ LCD Monitor
Power Cord
(Picture may differ from product supplied 
for your region.)
Video Cable: D-Sub 
Video Cable: DVI...

  5   Getting to know your monitor
2. Getting to know your monitor
Front view
Back view
 Above diagram may vary depending on the model.1. Power button
2. Control buttons
3. AC Power Input jack
4. Cable clip
5. DVI socket
6. D-Sub socket
7. Lock switch
 

6  How to assemble your monitor hardware  
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Connect the PC video cable 
Do not use both DVI-D cable and D-Sub cable on the 
same PC. The only case in which both cables can be 
used is if they are connected to two different PCs with 
appropriate video systems. 
Connect one end of the DVI-D cable to the monitor 
DVI-D...

  7   How to assemble your monitor hardware
Rotating the monitor (optional)
4. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet 
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button. 
Turn on the computer too, and follow the instructions in 
Section 4: 
Getting the most from your BenQ monitor 
on page 10
 to install the monitor software.
1. Fully extend the monitor and tilt it.
Gently lift the...

8  How to assemble your monitor hardware  
Then tilt the monitor. 
2. Rotate the monitor 90 degrees clockwise as 
illustrated. 
To avoid the edge of the LCD display hitting the 
monitor base surface while it is being rotated, do tilt 
and extend the monitor to the highest position before 
you start to rotate the display. 
3. Adjust the monitor to the desired viewing angle.
 

  9   How to assemble your monitor hardware
Viewing angle adjustment
You may position the screen to the desired angle with -2° to +20° monitor tilt, 90° (left and right 
total) monitor swivel, and 130 mm monitor height.
 

10  Getting the most from your BenQ monitor  
4. Getting the most from your BenQ monitor
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install 
the custom BenQ LCD Monitor driver software as provided on the BenQ website 
(http://www.benq.com/support). See Downloading the LCD Monitor driver files from the 
Internet on page 10 for details.
The circumstances under which you connect and install your BenQ LCD Monitor will determine 
which process you need to follow to...