BenQ V2400w User Manual

Welcome
V2400W
24 Wide-Screen LCD Monitor
User Manual
 

2    
Copyright
Copyright © 2008 by BenQ Corporation. All rights reserved. No part of this publication may be 
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language 
or computer language, in any form or by any me ans, electronic, mechanical, magnetic, optical, 
chemical, manual or otherwise, without the pr ior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or  warranties, either expressed or implied, with 
respect...

Table of Contents 3
Ta b l e  o f  C o n t e n t s
Getting started  ...................................................................................................................... 4
Getting to know your monitor  .. .......................................................................................... 6
Front view (1)  ........................................................................\
...................................... 6
Front view (2)...

4  Getting started  
1. Getting started
When unpacking please check you have the following items. If any are missing or damaged, please 
contact the place of purchase for a replacement.
 
BenQ LCD Monitor
Quick Start Guide
 
CD-ROM
 
Power Cord
(Picture may differ from product 
supplied for your region)
Signal Cable: D-Sub
Signal Cable: DVI-D (optional)
 

  5
  Getting started
Consider keeping the box and packaging in storage for use in the future when you may need to transport 
the monitor. The fitted foam packing is ideal  for protecting the monitor during transport.
Signal Cable: HDMI (optional)
 

6  Getting to know your monitor  
2. Getting to know your monitor
Front view (1)
Plug the earphone or headset into the earphone socket to receive the audio signal from HDMI input. See 
Audio menu on page 26  for information about audio controls. 
Front view (2)
1. AUTO
2. MENU
3. 
W /Mode
4. 
X /Contrast/Brightness
5. ENTER
6. Power
For more information about 
these keys, please refer to  
The control panel on page 
17 .
Earphone socket
 

  7
  Getting to know your monitor
Back view 
1. AC power input jack
2. DVI-D input socket 
3. HDMI input socket
4. D-Sub input socket
 

8  How to assemble your monitor hardware  
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing. 
Do not plug-in or turn-on the power to the monitor until instructed to do so. 
1. Unpack the monitor and place it on a stable surface. 
 
2. Connect the video cable.
Do not use both DVI-D cable and D-Sub cable on the 
same PC. The only case in which both cables can be 
used is if they are connected to two different PCs with 
appropriate video systems....

  9
  How to assemble your monitor hardware
3. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled 
‘POWER IN’ on the rear of the monitor. Do not connect 
the other end to a power outlet just yet. 
4. Route the cables via the cable holder.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet 
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the...

10  How to assemble your monitor hardware  
Adjusting the monitor angle
For comfortable viewing of images on the screen, you may tilt the monitor upward to 20 degrees 
and downward to -5 degrees.