BenQ T2210hda User Manual

T2210HD/T2210HDA
21.5’’ Wide-Screen LCD Monitor
User Manual
 

Table of Contents 2
Ta b l e  o f  C o n t e n t s
Package contents  ..................................................................................................................3
Installation .............................................................................................................................4
To connect the monitor to your PC  .......................................................................... 4
Adjusting your monitor...

  3   Package contents
1. Package contents 
1. LCD Monitor
2. Monitor Base (the shape of base may vary according to 
the monitor model)
3. Power Cord (plug may vary according to the electrical 
standards for your area)
4. Analog Signal Cable
5. Digital Signal Cable (optional)
6. Audio Cable
7. Quick Installation Guide
8. CD-ROM (contains user manual)
Please install monitor drivers from the CD-ROM. The 
T2210HD driver is named BENQT2200HD.inf, and the 
T2210HDA driver is named BENQT2200HDA.inf.
 

4 Installation  
2. Installation
To connect the monitor to your PC
Make sure that the PC and monitor are unplugged.
1. Connect the signal cable (VGA or DVI) to the monitor and the PC.
2. Connect the audio cable to the monitor and the PC.
3. Connect the separate power cable to the monitor and a grounded outlet.
 

  5   Adjusting your monitor
3. Adjusting your monitor
Functions of the buttons and indicator
OSD icon list
ItemFunction
Enter
Enter OSD menu, select item, enter submenu, and confirm recall.
X
1. Positive adjustment, change within several selections.
2. Hot key of Brightness.
W
1. Minus adjustment, change within several selections.
2. Hot key of Contrast.
Exit
1. Leave menu, cancel recall. (Settings will be saved automatically after 
adjustments are made.)
2. Hot key of Input Select.
AutoHot key of auto...

6  Adjusting your monitor  
Miscellaneous * Select Miscellaneous adjustment submenu
Brightness * Adjust the luminance of the screen
Contrast * Adjust the contrast level of the screen
H. Position * Shift the screen left or right
V. Position * Shift the screen up or down
Pixel Clock * Adjust the monitor internal sampling clock rate
Phase * Adjust the monitor internal signal phase
OSD H. Position * Shift the OSD left or right
OSD V. Position * Shift the OSD up or down
OSD Time * Set OSD display duration...

  7
  Troubleshooting
4. Troubleshooting
SymptomRemedy
*Blank Screen*
Power indicator is off
• Make sure the power cable is connected properly (see 
Installation on page 4).
• Make sure that the monitor was turned on using the  power switch (see 
To connect the monitor to your PC 
on page 4
).
Power indicator lights orange• Perhaps a power saving mode is active? Press any key  on your keyboard or move the mouse.
Power indicator lights green• A screen saver may have activated automatically after a certain...

8 Specifications  
5. Specifications
21.5’’ Wide-Screen LCD monitor
ItemT2210HD/T2210HDA
PanelDisplay Size 476.64 (H) x 268.11 (V) mm
Pixel Pitch 0.248 (H) x 0.248 (V) mm
Monitor Display Colors 16.7M colors
Input Signal Frequency Horizontal: 30 - 83 KHz
Vertical: 56 - 76 Hz
Connector Analog D-sub 15 pin
Digital
DVI 24 pin (Not for T2210HDA)
Tilt Tilt Angle -5° - 20°
Dimensions
(W x H x D) Net
516.4(W) x 386.7(H) x 211.6(D) mm
Weight Net4.2 kg
Power AC
AC 100-240V, 50-60 Hz
Consumption Active: <
 52W /...