BenQ T201wa User Manual

T201W/T201WA
20’’ Wide-Screen LCD Monitor
User Manual
 

Table of Contents 2
Ta b l e  o f  C o n t e n t s
Package contents  ..................................................................................................................3
Installation .............................................................................................................................4
To connect the monitor to your PC  .......................................................................... 4
To connect the monitor to the power source...

  3   Package contents
1. Package contents 
1. LCD Monitor
2. Monitor Base (the shape of base may vary according to 
the monitor model)
3. Power Cord (plug may vary according to the electrical 
standards for your area)
4. Analog Signal Cable
5. Quick Installation Guide
6. CD-ROM (contains user manual)
7. Digital Signal Cable (optional)
Note: Not for T201WA.
8. Audio Cable (optional)
 

4 Installation  
2. Installation
To connect the monitor to your PC
1. Make sure that the PC and monitor are unplugged.
2. Connect the signal cable (VGA or DVI) to the monitor and the PC.
To connect the monitor to the power source
Connect the separate power cable to the monitor and a grounded outlet.
 

  5   Adjusting your monitor
3. Adjusting your monitor
Functions of the buttons and indicator
OSD icon list
ItemFunction
Enter
Enter OSD menu, select item, enter submenu, and confirm recall.
W
1. Positive adjustment, change within several selections.
2. Hot key of Brightness.
X
1. Minus adjustment, change within several selections.
2. Hot key of Contrast.
Exit
1. Leave menu, cancel recall. (Settings will be saved automatically after 
adjustments are made.)
2. Hot key of Volume control in Audio model.
3....

6  Adjusting your monitor  
Miscellaneous * Select Miscellaneous adjustment submenu
Brightness * Adjust the luminance of the screen
Contrast * Adjust the contrast level of the screen
H. Position * Shift the screen left or right
V. Position * Shift the screen up or down
Pixel Clock * Adjust the monitor internal sampling clock rate
Phase * Adjust the monitor internal signal phase
OSD H. Position * Shift the OSD left or right
OSD V. Position * Shift the OSD up or down
OSD Time * Set OSD display duration...

  7   Troubleshooting
4. Troubleshooting
SymptomRemedy
*Blank Screen*
Power indicator is off
• Make sure the power cable is connected properly (see 
Installation on page 4).
• Make sure that the monitor was turned on using the 
power switch (see 
To connect the monitor to your PC 
on page 4
).
Power indicator lights orange• Perhaps a power saving mode is active? Press any key 
on your keyboard or move the mouse.
Power indicator lights green• A screen saver may have activated automatically after a...

8 Specifications  
5. Specifications
20’’ Wide-Screen LCD monitor
ItemT201W/T201WA
 PanelDisplay Size 433.44 (H) x 270.90 (V) mm
Pixel Pitch 0.258 (H) x 0.258 (V) mm
 Monitor Display Colors 16.2M colors
Input Signal FrequencyHorizontal: 30 - 82 KHz
Vertical: 56 - 76 Hz
 ConnectorAnalog D-sub 15 pin
Digital DVI 24 pin (Not for T201WA)
Tilt Tilt Angle -2° - 22°
Dimensions
(W x H x D)Net 479.66(W) x 400.42(H) x 186.9(D) mm
Weight Net 4.34 kg
 PowerAC AC 90-264V, 47 Hz / 63 Hz
Consumption Active: < 50W /...