BenQ Projector SW921 User Manual
Here you can view all the pages of manual BenQ Projector SW921 User Manual. The BenQ manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
51 Using the projector EnglishOn-Screen Display (OSD) menus On-Screen Display (OSD) structure Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menuSub-menuOptions Picture Picture Mode Bright/Presentation/sRGB/Cinema/(3D)/User 1/User 2 Reference Mode Bright/Presentation/sRGB/Cinema/User 1/User 2 Brightness 0~50~100 Contrast 0~50~100 Color 0~50~100 Tint 0~50~100 Sharpness 0–15 Advanced... Black Level 0 IRE/7.5 IRE Noise Reduction 0-31 Color Temperature...
Page 52
52 Using the projector English Main menuSub-menuOptions Display Wall Color Off/Light Yellow/Pink/Light Green/Blue/ Blackboard Aspect Ratio Auto/Real/4:3/16:9/16:10 Overscan Adjustment 0/1/2/3 2D Keystone Corner Fit Top Left/Top Right/Bottom Left/ Bottom Right 3D 3D Mode Auto/Off/Frame Sequential/Frame Packing/Top-Bottom/Side-by-Side 3D Sync Invert Disable/Invert Save 3D Settings 3D Settings 1/3D Settings 2/ 3D Settings 3 Apply 3D Settings 3D Settings 1/3D Settings 2/ 3D Settings 3/Off Teaching...
Page 53
53 Using the projector English Note that the menu items are available when the projec tor detects at least one valid signal. If there is no equipment connected to the projector or no sign al detected, limited menu items are accessible. Main menuSub-menuOptions System Setup: Advanced High Altitude On/Off Lamp Settings Lamp Mode Normal/Economic Reset Lamp Timer Reset/Cancel Lamp Timer Lamp Usage Time Normal Mode Economic Mode Equivalent Lamp Hour Security Settings Power On Lock On/Off Change...
Page 54
54 Using the projector EnglishPicture menu Picture menu (Advanced) FunctionDescription Picture Mode Pre-defined picture modes are provided so you can optimize your projector picture set-up to suit your program type. See Selecting a preset mode on page 32 for details. Reference Mode Selects a preset mode that most suits your need for the picture quality and further fine-tune the picture based on the selections listed below. See Setting the User 1/User 2 mode on page 34 for details....
Page 55
55 Using the projector EnglishDisplay menu FunctionDescription Wall Color Corrects the projected picture color when the projection surface is not white. See Setting a wall color on page 41 for details. Aspect RatioThere are several options to set the aspect ratio depending on your input source. See Selecting the aspect ratio on page 39 for details. Overscan Adjustment Conceals the poor picture quality in the four edges. You can also manually press / to decide how much to be concealed. Setting 0...
Page 56
56 Using the projector EnglishSource menu FunctionDescription Quick Search Allows the projector to search automatically for input sources. If the source scan is On , the projector will scan for input sources until it acquires a signal. If the function is not activated, the projector selects the last used input source. HDMI Format Selects an input source type for the HDMI signal. Auto is the default and recommended setting. You can also manually select the source type. The different source types...
Page 57
57 Using the projector EnglishSystem Setup: Basic menu FunctionDescription Language Sets the language for the On-Screen Display (OSD) menus. See Using the menus on page 25 for details. Projector InstallationThe projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See Choosing a location on page 13 for details. Menu Settings Menu Display Time Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in...
Page 58
58 Using the projector EnglishSystem Setup: Advanced menu FunctionDescription High Altitude A mode for operation in areas like high altitude or high temperature. See Operating in a high altitude environment on page 49 for details. Lamp Settings Lamp Mode Selects the projector lamp power among Normal and Economic modes. See Setting the lamp mode on page 44 for details. Reset Lamp Timer Once the lamp is renewed, select Reset to return the lamp timer to 0. See Resetting the lamp timer on page 66 for...
Page 59
59 Using the projector English Standby Settings Network Selecting On enables the function. The projector is able to provide the network function when it is in standby mode. Monitor Out Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the PC jack is correctly connected to devices. See Connecting a monitor on page 22 for how to make the connection. Audio Pass Through Press / to choose the source that you wish to use in operation mode. See...
Page 60
60 Using the projector EnglishInformation menu This menu shows you the current operating status of the projector. Some picture adjustments are available only when cert ain input sources are in use. Unavailable adjustments are not shown on the screen. FunctionDescription Source Shows the current signal source. Picture ModeShows the selected mode in the Picture > Picture Mode menu. Lamp ModeShows the selected lamp mode in the System Setup: Advanced > Lamp Mode menu. ResolutionShows the native...